thecno in5 after phone stuck in logo - GSM-Forum

SAN INFOTECH · 08-10-2018, 08:34

Quote:

Action : Format UserData.
Selected Tecno:IN5
Exe version: Avengers Box MTK 0.5.3
Reinsert phone battery.
Battery must be charged.
Phone must be off with battery inside.
Please insert USB cable now...
Detected : MediaTek PreLoader USB VCOM (Android) (COM5)
Boot mode: Preloader
Using Algo 2.
Phone detected...Please wait
Sending DA agent, please wait...
----------------------------------------------------
BaseBand CPU :MT6737T
BaseBand CPU Secure Version : FF
BaseBand CPU Bootloader Version : 01
----------------------------------------------------
INT RAM: 128 KB SDRAM
EXT RAM: 3 GB DRAM
----------------------------------------------------
EMMC: (233Gb+24576Mb) HYNIX 0x484247346132
EMMC FW VERSION: a5:00:00:00:00:00:00:00
EMMC CID: 90014A484247346132 : 00000000000000
EMMC UA SIZE: 0x747c00000
BOOT STYLE: EMMC BOOT
FULL LENGTH: 0x748800000 [29.133 GB]
-Reading GPT Drive OK
Status: USB_HIGH_SPEED
Detecting high speed port, wait......
If driver not installed, install high speed port driver.
If not need high speed port, disable it.
After repeat opperation.
Detected : MediaTek DA USB VCOM (Android) (COM53)
Detecting format adress....wait!
Starting generic userdata format...!
Partition: cache begin: 0x14a800000 length: 0x19000000
Partition: userdata begin: 0x163800000 length: 0x5e3380000
Phone can start slow at first power on
If phone stuck on logo, perform wipe from recovery.
First start can take up to 5 min on some phones.
Wait untill phone will start charging.
All done.

after this phone stuck in logo

**orbita** · 08-10-2018, 09:04

Try to make wipe from recovery or try to enter in factory mode and use clean emmc function from factory mode.

SAN INFOTECH · 08-10-2018, 10:02

Quote:

Originally Posted by orbita

Try to make wipe from recovery or try to enter in factory mode and use clean emmc function from factory mode.

Quote:

Scanning for presents meta ports...
Phone must be off with battery inside.
Please insert USB cable now...
In some phones need to keep VOL- button untill inserting USB cable.
[5]Detected: MediaTek PreLoader USB VCOM (Android) (COM5)
\\?\usb#vid_0e8d&pid_2000#6&27177e6b&0&3#{a5dcbf10-6530-11d2-901f-00c04fb951ed}
Starting FACTORY MODE, wait...
If need to make phone factory reset, scroll to line what have EMMC in name and execute.
In some phones factory menu can start after 5-30sec.
All done.

Quote:

Scanning for presents meta ports...
Detected(39) : MediaTek USB VCOM (Android) (COM39)
Start sync target, waiting responce.....
All done.

after this phone show no command logo

**orbita** · 08-10-2018, 10:16

To acces your phone recovery, need to press vol+ and power on.
What problem haved phone before format?

SAN INFOTECH · 08-10-2018, 14:44

Quote:

Originally Posted by orbita

To acces your phone recovery, need to press vol+ and power on.
What problem haved phone before format?

cant access recovery mode,
pattan lock

**orbita** · 08-10-2018, 16:06

pattan lock most posible meen pattern lock, right?
You must flash factory firmware in phone, seems here exists some protection on format filesystem.

08-10-2018, 09:04	#2 (permalink)
orbita Product Manager Join Date: Apr 2002 Location: nckDongle Posts: 13,325 Member: 11170 Status: Offline Sonork: 1603694 Thanks Meter: 6,944	Try to make wipe from recovery or try to enter in factory mode and use clean emmc function from factory mode.

08-10-2018, 10:16	#4 (permalink)
orbita Product Manager Join Date: Apr 2002 Location: nckDongle Posts: 13,325 Member: 11170 Status: Offline Sonork: 1603694 Thanks Meter: 6,944	To acces your phone recovery, need to press vol+ and power on. What problem haved phone before format?

08-10-2018, 16:06	#6 (permalink)
orbita Product Manager Join Date: Apr 2002 Location: nckDongle Posts: 13,325 Member: 11170 Status: Offline Sonork: 1603694 Thanks Meter: 6,944	pattan lock most posible meen pattern lock, right? You must flash factory firmware in phone, seems here exists some protection on format filesystem.