Post Here successful reports with Avengers Box

[niaz muhammad]

tecno bb4k spark 4 write flash don..

 Flash files count is :24
 Action : Firmware update.
 Selected Model: Tecno: Spark 4
 Exe version: Avengers Box MTK 0.7.2
 Scenario: [0]Safe Flash
 Reinsert phone battery. 
 Battery must be charged.
 Phone must be off with battery inside. 
 Please insert USB cable now...
 Detected : MediaTek USB Port_V1632 (COM15)
 Boot mode: Brom
 Phone detected...Please wait
 BBCHIP: 6761 200 ca01
 Using Algo 1.
 Helio MT6761 phone detected, swithing to helio api
 Loading emmi from download
 Helio enabled DRAM in First Da: TRUE
 Sending loader.....
 BBCHIP MT6761
 [1]Storage EMMC
 EMMC FW VERSION: 00:00:00:00:00:00:00:00
 EMMC CID: 15010051443633 : 000000000000000000
 EMMC UA SIZE: 0x747c00000     
 BOOT STYLE: EMMC BOOT
 FULL LENGTH: 0x749400000      [29.145 GB]
 Status: USB_HIGH_SPEED
 Detecting high speed port, wait......
 If driver not installed, install high speed port driver.
 If not need high speed port, disable it.
 After repeat opperation.
 Detected : MediaTek DA USB VCOM (Android) (COM68)
 Starting flash helio.
  [4] WRITE TO PARTITION [ md1img ] 
  [5] WRITE TO PARTITION [ spmfw ] 
  [6] WRITE TO PARTITION [ scp1 ] 
  [7] WRITE TO PARTITION [ scp2 ] 
  [8] WRITE TO PARTITION [ sspm_1 ] 
  [9] WRITE TO PARTITION [ sspm_2 ] 
  [13] WRITE TO PARTITION [ lk ] 
  [14] WRITE TO PARTITION [ lk2 ] 
  [15] WRITE TO PARTITION [ boot ] 
  [16] WRITE TO PARTITION [ logo ] 
  [17] WRITE TO PARTITION [ dtbo ] 
  [18] WRITE TO PARTITION [ tee1 ] 
  [19] WRITE TO PARTITION [ tee2 ] 
  [20] WRITE TO PARTITION [ vendor ] 
  [21] WRITE TO PARTITION [ system ] 
  [22] WRITE TO PARTITION [ vbmeta ] 
  [26] WRITE TO PARTITION [ cache ] 
  [27] WRITE TO PARTITION [ recovery ] 
  [28] WRITE TO PARTITION [ tkv ] 
  [37] WRITE TO PARTITION [ userdata ] 
 [helio]Wait untill phone will start charging.
 [0]All done.

[bhaveshrami]

zte v768 t-mobile concord unlock done 1 clak


thanks

[rsa7262]

VGO TEl Ocean 6 Frp Remove Done with AVG Spd..

EXE: Avengers Spreadtrum Module 1.1
SELECTED: SC7731C_EMMC
ACTION: Erase FRP
Start Detect phone...
Detected: SPRD U2S Diag (COM207)
Sending loader, keep boot key untill loader start.
Loader OK: Spreadtrum Boot Block version 1.1
Changing bautrate OK.
Send Second Loader.
FileSystem: EMMC
Manufacturer: VGOTEL
Hardware: SP7731C_V1.0.0
Platform: sc8830
Fota platform: Sprd7731_7.0
Board: sp7731cea
Build Id: NRD90M
Model: Ocean 6
Android Release: 7.0
Android Version: VGOTEL_OCEAN_6_V06_26122017
Country: US
Security patch: 2017-12-05
Bootloader can be unlocked: 1
This phone have frp partition.
Removing frp, wait...
Format OK.
Total Time: 00:00:17
Done.

[rsa7262]

Vivo Y91c Frp Remove Done

Exe version: Avengers Box MTK 0.7.2
 Selected model: Vivo  Y91C new
 [auto]Action: Reset FRP
 Reinsert phone battery. 
 Battery must be charged.
 Keep VOL+ button untill inserting USB cable.
 Detected : MediaTek USB Port (COM113)
 Boot mode: Brom
 Phone detected...Please wait
 BBCHIP: 6765 0 ca00
 Using Algo 5.
 Helio MT6765 phone detected, swithing to helio api
 Loading emmi from database
 Helio enabled DRAM in First Da: TRUE
 Sending loader.....
 BBCHIP MT6765
 [1]Storage EMMC
 EMMC FW VERSION: 00:00:00:00:00:00:00:00
 EMMC CID: 15010051443633 : 000000000000000000
 EMMC UA SIZE: 0x747c00000     
 BOOT STYLE: EMMC BOOT
 FULL LENGTH: 0x749400000      [29.145 GB]
 Phone have OTP partition.
 Modem version: MOLY.LR12A.R2.MP.V23.P204
 Starting helio frp, not disconnect phone untill done
 Partition: frp
 [HELIO][frp]Format partition, please wait...
 [0]FRP Reset Done.
 [helio]Wait untill phone will start charging.
 [0]All done.

[rsa7262]

Vivo Y91c Pattren Remove Done by Great Avenger Mtk Tool

Action : Reset to factory default.
Selected Model: Vivo:Y91C new
Exe version: Avengers Box MTK 0.7.2
Scanning for presents meta ports...
Detected(108) : Android Gadget VCOM Driver (COM108)
Start sync target, waiting responce.....
ChipID: MT6761,S01
[MT6761,S01]Using Algo 5
Resetting phone step 1, wait....
Resetting phone step 2, wait....
ClearValue ok.
FormatTCard ok.
[helio]Wait untill phone will start charging.
[0]All done.

[rsa7262]

Oppo A37F FRP Remove Done @1 click with Great Avenger QUALM Tool

Exe Version: Avengers Qualcomm Module 0.12.7
Operation: Reset FRP
Searching for phone.....
Qualcomm HS-USB QDLoader 9008 (COM101) detected.
Hello received.
HW ID: 00000000E1507000 MSM8916
PK HASH: CC3153A80293939B90D02D3BF8B23E0292E452FEF662C74998421ADAD42A380F
Checking database for suitable loader.....
Arhitecture:32 bits
[32]Sending loader, please wait.. 
Waiting for loader to start...
[1] Send NOP ok, loader start.
CPU: MSM8916
MaxPayloadSizeFromTargetInBytes: 4096
MaxPayloadSizeToTargetInBytes: 8192
Reading partition info, wait.
Volume[0] Size: 14.56 GB  Partitions count: 38
[0160B39F]Userdata Size: 11.02 GB
Erasing FRP, wait.....
Erasing FRP, finished
Restarting phone.....
************************************* 
Log saved: C:\Users\rsa7262\Documents\Avengers\qualcomm_module\qc_module_Logs\reset_frp_MSM8916_00000000E1507000_CC3153A80293939B90D02D3BF8B23E0292E452FEF662C74998421ADAD42A380F2.txt
Total Time: 00:00:01
Done.

[worldlinkmobil]

Exe version: Avengers Box MTK 0.7.2
Selected model: Qmobile QMobile J1
[auto]Action: Reset FRP
Reinsert phone battery.
Battery must be charged.
Phone must be off with battery inside.
Please insert USB cable now...
Detected : MediaTek PreLoader USB VCOM_V1632 (Android) (COM303)
Boot mode: Preloader
BBCHIP: 335 0 ca00
Using Algo 2.
Phone detected...Please wait
Sending DA agent, please wait...
----------------------------------------------------
BaseBand CPU :MT6737M
BaseBand CPU Secure Version : FF
BaseBand CPU Bootloader Version : 01
----------------------------------------------------
INT RAM: 128 KB SDRAM
EXT RAM: 1 GB DRAM
----------------------------------------------------
EMMC: (58Gb+8192Mb) HYNIX 0x483847346132
EMMC FW VERSION: a5:00:00:00:00:00:00:00
EMMC CID: 90014A483847346132 : 00000000000000
EMMC UA SIZE: 0x1d2000000
BOOT STYLE: EMMC BOOT
FULL LENGTH: 0x1d2c00000 [7.293 GB]
Checking data, wait...

Writing FRP, wait...
FRP Reset Done.
Wait untill phone will start charging.
[0]All done.

[niloysadik]

Phone must be off with battery inside.
Please insert USB cable now...
In some phones need to keep VOL- button untill inserting USB cable.
[9]Detected: MediaTek PreLoader USB VCOM (Android) (COM9)
\\?\usb#vid_0e8d&pid_2000#5&28427ec8&0&1#{a5dcbf10-6530-11d2-901f-00c04fb951ed}
Starting META mode, wait...
Restarting to meta,wait....
If drivers missing, please install CDC drivers.
This can take up to 5 min on slow phones.
If take too long, check device manager for drivers.
[15]META Port Detected: MediaTek USB VCOM (Android) (COM15)
USB\VID_0E8D&PID_2007\5&28427EC8&0&1
Connecting target, wait...
[AP]BaseBand CPU : mt6735,S01
[AP]APP_VER: ALPS.L1.MP3.V2_ONTIM6735.66T.L1_P73
Manufacturer: HUAWEI
Model: ALPS.L1.MP3.V2_ONTIM6735.
SN: AL03P16412D13121
Model: TIT-AL00C567B100
FRP CODE
fastboot oem frp-unlock 68c20fa29ef9e048
Power phone in fastboot mode, press button Enter FRP Code and use this code: 68c20fa29ef9e048

[hunnyck]

lyf LS-5020 frp reset done

http://

[hunnyck]

Gionee A1 FRP Reset done

http://

[hunnyck]

HTC Desire 526G dual sim flash done

http://

[hunnyck]

HTC D526 IMEI REPAIR DONE

http://

[hunnyck]

INFIX x5515 FRP resehttp://t DONE

[Nadeem Waris]

[auto]Action: Reset FRP
Reinsert phone battery.
Battery must be charged.
Phone must be off with battery inside.
Please insert USB cable now...
Detected : MediaTek PreLoader USB VCOM (Android) (COM62)
Boot mode: Preloader
BBCHIP: 6580 0 ca00
Using Algo 1.
Phone detected...Please wait
Sending DA agent, please wait...
----------------------------------------------------
BaseBand CPU :MT6580
BaseBand CPU Secure Version : FF
BaseBand CPU Bootloader Version : 01
----------------------------------------------------
INT RAM: 128 KB SDRAM
EXT RAM: 1 GB DRAM
----------------------------------------------------
EMMC: (57Gb+8192Mb) UNKNOWN_EMMC_DEVICE
EMMC FW VERSION: 10:00:00:00:00:00:00:00
EMMC CID: F40122426977696E20 : 00000000000000
EMMC UA SIZE: 0x1cd000000
BOOT STYLE: EMMC BOOT
FULL LENGTH: 0x1cdc00000 [7.215 GB]
Checking data, wait...

Writing FRP, wait...
FRP Reset Done.
Wait untill phone will start charging.
[0]All done.

[mbiborna]

\par Operation: Factory Format
\par Searching for phone.....
\par Qualcomm HS-USB QDLoader 9008 (COM8) detected.
\par Hello received.
\par HW ID: 00000000E1600500
\par PK HASH: 57158EAF1814D78FD2B3105ECE4DB18A817A08AC664A5782A925F3FF8403D39A
\par Checking database for suitable loader.....
\par Arhitecture:32 bits
\par [32]Sending loader, please wait.. 
\par Waiting for loader to start...
\par [1] Send NOP ok, loader start.
\par CPU: MSM8917
\par MaxPayloadSizeFromTargetInBytes: 4096
\par MaxPayloadSizeToTargetInBytes: 8192
\par Reading partition info, wait.
\par Volume[0] Size: 14.56 GB  Partitions count: 48
\par [01907FDF]Userdata Size: 12.52 GB
\par Manufacturer: Xiaomi
\par Cpu: armeabi-v7a
\par Build Id: OPM1.171019.026
\par Model: Redmi Go
\par Android Release: 8.1.0
\par Android Version: OPM1.171019.026.V10.2.18.0.OCLMIXM
\par Security patch: 2020-05-05
\par Resetting cache , wait
\par Total blocks 10
\par Resetting userdata , wait
\par Total blocks 135
\par Factory reset done, wait untill phone start
\par This can take up to 5 min on slow phones.
\par Restarting phone.....
\par *************************************