QMobile w50 Fixed ( Unfortunately System has stopped Working Etc...) By Avengers - GSM-Forum

GSM AR · 09-06-2020, 11:04

EXE: Avengers Spreadtrum Module 1.3
ACTION: Flash Firmware.
Selected firmware: QMobileW50_MP_10_30.pac
NV: Default Mode (protect calibration)
Device Storage: EMMC
Detected: SPRD U2S Diag (COM9)
[00:00:00] Sending loader.
BOOT: SPRD3W
Sending loader, keep boot key untill loader start.
[00:00:01] Loader ok
[00:00:01] Reconnecting .
Detected: SPRD U2S Diag (COM9)
[00:00:03] Wait for loader....
Loader OK: Spreadtrum Boot Block version 1.1
Changing bautrate OK.
[00:00:03] First boot done.
[00:00:03] Sending second loader.
[00:00:08] Second loader sent ok.
[00:00:08] Reading: miscdata
[00:00:08] Reading: wfixnv1
NVRAM saved to: C:\Users\GSM AR\spreadtrum_module\spd_nvram_backup\_35605XXXXXX XXXXXX\_356053XXXXXXXXXXXXXX_nvram_backup_1.tar
[00:00:15] Start write: wfixnv1
Protecting GSM_CALI_ITEM_ID id: 0x2
Protecting W_Calibration id: 0x12D
Protecting BlueTooth id: 0x191
Protecting BandSelect id: 0xD
Protecting WIFI id: 0x199
Protecting MMITest id: 0x19A
Protecting WIFICal1 id: 0x19F
Protecting WIFICal2 id: 0x1A0
Protecting WIFICal3 id: 0x1A1
[00:00:16] Start write: wcnfixnv1
[00:00:17] Start write: prodnv
[00:00:19] Format: uboot
[00:00:19] [uboot]Format OK.
[00:00:19] Start write: splloader
[00:00:19] Start write: wmodem
[00:00:21] Start write: wdsp
[00:00:22] Start write: wcnmodem
[00:00:22] Start write: boot
[00:00:25] Start write: recovery
[00:00:28] Start write: system
[00:08:05] Start write: userdata
[00:08:23] Start write: logo
[00:08:23] Start write: fbootlogo
[00:08:23] Format: wruntimenv1
[00:08:23] [wruntimenv1]Format OK.
[00:08:23] Format: wcnruntimenv1
[00:08:23] [wcnruntimenv1]Format OK.
[00:08:23] Start write: cache
[00:08:25] Format: misc
[00:08:25] [misc]Format OK.
[00:08:25] Start write: uboot
Flashing done.
Total Time: 00:08:30
Done

.

09-06-2020, 11:04	#1 (permalink)
GSM AR Registered User Join Date: Aug 2016 Location: Multan Pakistan Posts: 787 Member: 2608490 Status: Offline Thanks Meter: 921	QMobile w50 Fixed ( Unfortunately System has stopped Working Etc...) By Avengers EXE: Avengers Spreadtrum Module 1.3 ACTION: Flash Firmware. Selected firmware: QMobileW50_MP_10_30.pac NV: Default Mode (protect calibration) Device Storage: EMMC Detected: SPRD U2S Diag (COM9) [00:00:00] Sending loader. BOOT: SPRD3W Sending loader, keep boot key untill loader start. [00:00:01] Loader ok [00:00:01] Reconnecting . Detected: SPRD U2S Diag (COM9) [00:00:03] Wait for loader.... Loader OK: Spreadtrum Boot Block version 1.1 Changing bautrate OK. [00:00:03] First boot done. [00:00:03] Sending second loader. [00:00:08] Second loader sent ok. [00:00:08] Reading: miscdata [00:00:08] Reading: wfixnv1 NVRAM saved to: C:\Users\GSM AR\spreadtrum_module\spd_nvram_backup\_35605XXXXXX XXXXXX\_356053XXXXXXXXXXXXXX_nvram_backup_1.tar [00:00:15] Start write: wfixnv1 Protecting GSM_CALI_ITEM_ID id: 0x2 Protecting W_Calibration id: 0x12D Protecting BlueTooth id: 0x191 Protecting BandSelect id: 0xD Protecting WIFI id: 0x199 Protecting MMITest id: 0x19A Protecting WIFICal1 id: 0x19F Protecting WIFICal2 id: 0x1A0 Protecting WIFICal3 id: 0x1A1 [00:00:16] Start write: wcnfixnv1 [00:00:17] Start write: prodnv [00:00:19] Format: uboot [00:00:19] [uboot]Format OK. [00:00:19] Start write: splloader [00:00:19] Start write: wmodem [00:00:21] Start write: wdsp [00:00:22] Start write: wcnmodem [00:00:22] Start write: boot [00:00:25] Start write: recovery [00:00:28] Start write: system [00:08:05] Start write: userdata [00:08:23] Start write: logo [00:08:23] Start write: fbootlogo [00:08:23] Format: wruntimenv1 [00:08:23] [wruntimenv1]Format OK. [00:08:23] Format: wcnruntimenv1 [00:08:23] [wcnruntimenv1]Format OK. [00:08:23] Start write: cache [00:08:25] Format: misc [00:08:25] [misc]Format OK. [00:08:25] Start write: uboot Flashing done. Total Time: 00:08:30 Done.