GSM-Forum - Sony c6 clone firmware

Code:
 Reinsert phone battery. 

 Battery must be charged.

 Phone must be off with battery inside. 

 Please insert USB cable now...

 Detected : PreLoader USB VCOM Port (COM22)

 Boot mode: Preloader

 Using Algo 1.

 Phone detected...Please wait

 Sending DA agent, please wait...

 ----------------------------------------------------

 BaseBand CPU :MT6580

 BaseBand CPU Secure Version : FF

 BaseBand CPU Bootloader Version : 01

 ----------------------------------------------------

 INT RAM: 128 KB SDRAM

 EXT RAM: 512 MB  DRAM

 ----------------------------------------------------

 EMMC: (57Gb+4096Mb) UNKNOWN_EMMC_DEVICE 

 EMMC FW VERSION: 39:00:00:00:00:00:00:00

 EMMC CID: 880103455041313030 : 00000000000000

 EMMC UA SIZE: 0x1ce100000     

 BOOT STYLE: EMMC BOOT

 FULL LENGTH: 0x1ced00000      [7.231 GB]

 -Reading GPT Drive OK

 Status: USB_HIGH_SPEED

 Detecting high speed port, wait......

 If driver not installed, install high speed port driver.

 If not need high speed port, disable it.

 After repeat opperation.

 Detected : MediaTek DA USB VCOM (Android) (COM7)

 Build ID: LMY47I

 Display ID: U925HA_V014En

 Version: 5.1

 Build Date: Tue Nov 22 22:10:31 CST 2016

 Model: gxq6580_weg_l

 Brand: alps

 Device: gxq6580_weg_l

 Manufacturer: alps

 Region: US

 Mediatek Version Release: ALPS.L1.MP6.V2_GXQ6580.WEG.L_P69

 Dumping Preloader.

 Start dumping flash, this can take up to 1 hour.......

 Start processing proinfo

 Reading:  BEGIN: 0x80000          - LEN: 0x300000        

 Start processing nvram

 IMEI[1] from NVRAM: 358193256734550

 IMEI[2] from NVRAM: 358193256734568

 Start processing protect1 ......

 Reading:  BEGIN: 0x880000         - LEN: 0xa00000        

 Start processing protect2 ......

 Reading:  BEGIN: 0x1280000        - LEN: 0xa00000        

 Start processing lk ......

 Start processing boot 

 Start processing recovery 

 Start processing logo ......

 Start processing frp ......

 Reading:  BEGIN: 0x4fa0000        - LEN: 0x100000        

 Start processing nvdata ......

 Reading:  BEGIN: 0x50a0000        - LEN: 0x2000000       

 Start processing secro

 Reading:  BEGIN: 0x9a00000        - LEN: 0x600000        

 Start processing system

 Reading:  BEGIN: 0xa800000        - LEN: 0x4b000000      

 Saved to : E:\Android_MTK\firmware_backup\MT6580_EMMC_alps_gxq6580_weg_l_5_1_ALPS_L1_MP6_V2_GXQ6580_WEG_L_P69(2018_08_23_11_19)

 Wait untill phone will start charging.

 All done.