Y511-U30 Imei Repair & Unlock Problem [ANSWERED] - GSM-Forum

free123free · 10-07-2015, 12:12

Hi,

I had got a Y511-U30 which was showing white strip Lines on LCD.. Flashed All firmwares from support But same problem.. Then i have Flashed "Y511-U251V100R001C258B101N_Firmware_Philippines_4_2_2" .. Now I,m Unable to Repair Imei and Unlock that Phone ..

Log:

Quote:

IMEI for write : 865xxxxxxxxxxxxx
Reinsert phone battery.
Battery must be charged.
Phone must be off with battery inside.
Please insert USB cable now...
Detected : PreLoader USB VCOM (Android) (COM17)
Phone detected...Please wait
Sending DA agent, please wait...
BBCHIP MT6572_S00
EMMC: (28Gb+4096Mb) HYNIX 0x483447316404
EMMC FW VERSION: 86:00:00:00:00:00:00:00
EMMC CID: 90014A4834473164048602A3E14A7145
EMMC UA SIZE: 0xe7000000
BOOT STYLE: EMMC BOOT
Detecting high speed port, wait......
If driver not installed, install high speed port driver.
Detected : DA USB VCOM (Android) (COM28)
Dumping NVRAM
IMEI[1] TO UPDATE: 865xxxxxxxxxxxx
Error[1]
Wait untill phone will start charging.
All done.

**orbita** · 10-07-2015, 13:17

Steps to perform.

1.Make security backup for safety.
2.Full erase except preloader from service tab.
3.Full flash phone including preloader(if you change version is extremly important) uboot and preloader are linked together.
4.Clean EMMC from factory mode or wipe phone from recovery.
5.Perform imei repair and after perform unlock.

free123free · 10-08-2015, 13:00

Ty so much for helping me out .. Can you please Help me to figure out Format Address .. There are two Options in Service Tab Format Custom & Format User Area..

**orbita** · 10-08-2015, 13:25

Format User Area will autodetect format adreses.

10-07-2015, 13:17	#2 (permalink)
orbita Product Manager Join Date: Apr 2002 Location: nckDongle Posts: 13,325 Member: 11170 Status: Offline Sonork: 1603694 Thanks Meter: 6,944	Steps to perform. 1.Make security backup for safety. 2.Full erase except preloader from service tab. 3.Full flash phone including preloader(if you change version is extremly important) uboot and preloader are linked together. 4.Clean EMMC from factory mode or wipe phone from recovery. 5.Perform imei repair and after perform unlock.

10-08-2015, 13:00	#3 (permalink)
free123free Freak Poster Join Date: Oct 2008 Posts: 239 Member: 887731 Status: Offline Thanks Meter: 72	Ty so much for helping me out .. Can you please Help me to figure out Format Address .. There are two Options in Service Tab Format Custom & Format User Area..

10-08-2015, 13:25	#4 (permalink)
orbita Product Manager Join Date: Apr 2002 Location: nckDongle Posts: 13,325 Member: 11170 Status: Offline Sonork: 1603694 Thanks Meter: 6,944	Format User Area will autodetect format adreses.