Htc 616h Restart Done With Nck Pro Write flash [USER REPORT] ★★★★
 

Htc 616h Restart Done With Nck Pro Write flash
https://s14.postimg.org/6ty8s1969/ht...rite_flash.png
Flash files count is :13
Action : Firmware update.
Selected Model: HTC: HTC 616
Exe version: NCKBox AndroidMTK 1.8.7.7
Scenario: [2]Flash Skip Preloader
Reinsert phone battery.
Battery must be charged.
Phone must be off with battery inside.
Please insert USB cable now...
Detected : PreLoader USB VCOM Port (COM13)
Boot mode: Preloader
Phone detected...Please wait
Sending DA agent, please wait...
BaseBand CPU :MT6592_S00
BaseBand CPU Secure Version : FF
BaseBand CPU Bootloader Version : 01
----------------------------------------------------
INT RAM: 128 KB SDRAM
EXT RAM: 1 GB DRAM
----------------------------------------------------
EMMC: (28Gb+8192Mb) HYNIX 0x483447316404
EMMC FW VERSION: 86:00:00:00:00:00:00:00
EMMC CID: 90014A48344731 : 000000000000000000
EMMC UA SIZE: 0xe7000000
BOOT STYLE: EMMC BOOT
FULL LENGTH: 0xe7600000 [3.615 GB]
Preloader SEC version: 2
Status: USB_HIGH_SPEED
Detecting high speed port, wait......
If driver not installed, install high speed port driver.
If not need high speed port, disable it.
After repeat opperation.
Detecting high speed port, wait......
Detected : DA USB VCOM Port (COM10)
Warning, flashing preloader disabled!
If you change android version, preloader must be flashed.
Flash EMMC Algo Start.
Preloader saved in firmware directory.
Starting flash.
FORMAT EMMC FLASH : BEGIN: 0x55000000 - LEN: 0xd000000
FORMAT EMMC FLASH : BEGIN: 0x62000000 - LEN: 0x83b00000
Download firmware to flash now...
Wait untill phone will start charging.
All done.