Huawei Y511-u30 invalid IMEI help ?? [ANSWERED]
 

i did try many time always process succes by logs but sitll invalid imei..

Action : IMEI REPAIR.
Selected Huawei:Ascend G610-U15
IMEI for write : 864532026750759
Scanning for presents meta ports...
Meta ports not detected, starting brom stage.
Phone must be off with battery inside.
Please insert USB cable now...
Detected(0) : PreLoader USB VCOM (Android) (COM29)
Starting META mode, wait...
If drivers missing, please install CDC drivers.
META ok, waiting for meta port....
META Port Detected[84] Gadget Serial (COM84)
Start sync target, waiting responce.....
BaseBand CPU : MT6572, E01
SW_VER : MOLY.WR8.W1315.MD.WG.MP.V1.P5
HW_VER : WINGTECH72_WET_JB3_HSPA_HW
Meta mode conected ok, start reading phone....
Start repair imei : 1
Phone imei[1] : 86453202675074
IMEI to repair: 864532026750759
IMEI repair OK.
Read IMEI again.
Phone imei[1] : 86453202675075
All done.

main imei was read also but software so here you have security error in phone , you also selected G615 not Y511 , you will need to read backup sec. from working phone and write into this phone then change imei.

Fast Unlocking right 100%.
This phone have simlock damaged by format or by manipulation.
Not need to repair imei, nvram e.t.c.
Will upload tomorow fuxup package in support.

You can do itself , if you have another good phone.
Backup security from working phone and write in your with write nvram unchecked.

Sir i have in same problem 3 phone in hand but chek in market i don't find this working phone if u can upload for me sec backup plz then help me ??

How become all this phones with damaged imei?
Not need to repair imei after.

Contact me by yahoo messenger or sonorq.
Lets see where is problem

I'am uploaded y511_repair_protect.rar
Flash this as firmware and repply if this help.

ok sir i am waiting for the link.........

Not need to wait, download from support.

repair done thank you

Flash files count is :5
Action : Firmware update.
Selected Huawei: Ascend Y511-U30
Phone must be off with battery inside.
Please insert USB cable now...
Detected : PreLoader USB VCOM Port (COM271)
Phone detected...Please wait
Sending DA agent, please wait...
BBCHIP MT6572_S00
EMMC: (28Gb+4096Mb) HYNIX 0x483447316404
EMMC FW VERSION: 86:00:00:00:00:00:00:00
BOOT STYLE : EMMC BOOT
Detecting high speed port, wait......
If driver not installed, install high speed port driver.
Detected : DA USB VCOM Port (COM279)
Warning, flashing preloader disabled!
If you change android version, preloader must be flashed.
Starting flash.
Download firmware to flash now...
PROTECT_F checksum is executing ...
PROTECT_S checksum is executing ...
CACHE checksum is executing ...
USRDATA checksum is executing ...
Wait untill phone will start charging.
All done.

imei repaired but after that no network please help

Phone can have nvram damage or firmware damage or hardware damage.
If phone have another problems also, only repairing imei, will not solve another problems.

security will not have backup huawei G610-U00 invalid imei?

Plese contact me with this phone in hands.
Need to do some testings.

how to Huawei Y511-u30 invalid IMEI help ??
baseband unkown