World's First NCK BOX Huawei Y 5 II Sec Boot-Read Write FF-Red Patrern-Country Unlock

[zulfqarali]

World's First

............................

NCK BOX

,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,

Huawei Y 5 II Sec Boot

-Read Write FF-Red Patrern-Country Unlock-Repair Imei-Reset Factory & More ............

Read Firmware

Read Security Backup

Repair IMEI

Reset Pattern Lock

Reset Factory Default

Country Unlock

 Please insert USB cable now...
 Detected : MediaTek PreLoader USB VCOM (Android) (COM4)
 Boot mode: Preloader
 Phone detected...Please wait
 Sending DA agent, please wait...
 BaseBand CPU :MT6735_S00
 BaseBand CPU Secure Version : FF
 BaseBand CPU Bootloader Version : 01
----------------------------------------------------
 INT RAM: 128 KB SDRAM
 EXT RAM: 1 GB  DRAM
----------------------------------------------------
 EMMC: (58Gb+8192Mb) HYNIX 0x483847316505 
 EMMC FW VERSION: 07:00:00:00:00:00:00:00
 EMMC CID: 90014A48384731 : 000000000000000000
 EMMC UA SIZE: 0x1d2000000     
 BOOT STYLE: EMMC BOOT
 FULL LENGTH: 0x1d2c00000      [7.293 GB]
 Preloader SEC version: 2
 Status: USB_HIGH_SPEED
 Detecting high speed port, wait......
 If driver not installed, install high speed port driver.
 If not need high speed port, disable it.
 After repeat opperation.
 Detecting high speed port, wait......
 Detected : MediaTek DA USB VCOM (Android) (COM20)
 This phone have FRP partition.
 Build Date: Thu Sep  1 07:24:11 CST 2016
 Build Date: 1472685851
 Region: GB

 Mediatek Version Release: CUN-L01C643B100
 FRP partition: /dev/block/platform/mtk-msdc.0/by-name/frp
 Display ID: CUN-L01C643B100
 Model: HUAWEI CUN-L01
 Brand: HUAWEI
 Build ID: HUAWEICUN-L01
 Device: HWCUN-L6735
 Version: 5.1
 Manufacturer: HUAWEI
 IMEI[1]: 869785026377040
 IMEI[2]: 123456789012345
 Wait untill phone will start charging.
 All done. 









BaseBand CPU Secure Version : FF
 BaseBand CPU Bootloader Version : 01
----------------------------------------------------
 INT RAM: 128 KB SDRAM
 EXT RAM: 1 GB  DRAM
----------------------------------------------------
 EMMC: (58Gb+8192Mb) HYNIX 0x483847316505 
 EMMC FW VERSION: 07:00:00:00:00:00:00:00
 EMMC CID: 90014A48384731 : 000000000000000000
 EMMC UA SIZE: 0x1d2000000     
 BOOT STYLE: EMMC BOOT
 FULL LENGTH: 0x1d2c00000      [7.293 GB]
 Preloader SEC version: 2
 Status: USB_HIGH_SPEED
 Detecting high speed port, wait......
 If driver not installed, install high speed port driver.
 If not need high speed port, disable it.
 After repeat opperation.
 Detecting high speed port, wait......
 Detected : MediaTek DA USB VCOM (Android) (COM20)
 Build Date: Thu Sep  1 07:24:11 CST 2016
 Build Date: 1472685851
 Region: GB

 Mediatek Version Release: CUN-L01C643B100
 FRP partition: /dev/block/platform/mtk-msdc.0/by-name/frp
 Display ID: CUN-L01C643B100
 Model: HUAWEI CUN-L01
 Brand: HUAWEI
 Build ID: HUAWEICUN-L01
 Device: HWCUN-L6735
 Version: 5.1
 Manufacturer: HUAWEI
 IMEI[1]: 869785026377040
 IMEI[2]: 123456789012345
 Dumping Preloader.
 Start dumping flash, this can take up to 1 hour.......
 Start procesing proinfo
 Reading:  BEGIN: 0x80000          - LEN: 0x1000          
 Start procesing nvram
 IMEI[1] from NVRAM: 869785026377040
 IMEI[2] from NVRAM: 123456789012345
 Start procesing protect1 ......
 Reading:  BEGIN: 0x880000         - LEN: 0xa00000        
 Start procesing protect2 ......
 Reading:  BEGIN: 0x1280000        - LEN: 0xa00000        
 Start procesing lk ......
 Start processing boot 
 Start processing recovery 
 Start procesing logo ......
 Start procesing ROOTM ......
 Reading:  BEGIN: 0x4f80000        - LEN: 0x80000         
 Start procesing secro
 Start procesing tee1
 Start procesing tee2
 Start procesing oeminfo ......
 Reading:  BEGIN: 0x6a80000        - LEN: 0x4000000       
 Start procesing frp ......
 Reading:  BEGIN: 0xaa80000        - LEN: 0x100000        
 Start procesing nvdata ......
 Reading:  BEGIN: 0xab80000        - LEN: 0x2000000       
 Start procesing system
 Reading:  BEGIN: 0xf000000        - LEN: 0x93300000      
 Start procesing cust
 Reading:  BEGIN: 0xa2300000       - LEN: 0x19500000      
 Backup cache disabled, we will skip it....
 Backup userdata disabled, we will skip it....
 Saved to : C:\Users\JAMIL MOBILE\Documents\Android_MTK\firmware_backup\MT6735_S00_EMMC_HUAWEICUN-L01__5.1_869785026377040_123456789012345_12_25_2016_15_04_04
 Wait untill phone will start charging.
 All done.


 Selected connection metod: META Mode
 Exe version: NCKBox AndroidMTK 1.8.7.4
 Selected model: Ascend Y5 II
 Action: Unlock
 Scanning for presents meta ports...
 Meta ports not detected, starting brom stage.
 Curent Platform: MT6735M
 Phone must be off with battery inside. 
 Please insert USB cable now...
 [4]Detected: MediaTek PreLoader USB VCOM (Android) (COM4) 
 \\?\usb#vid_0e8d&pid_2000#5&2cf730fd&0&3#{a5dcbf10-6530-11d2-901f-00c04fb951ed} 
 Starting META mode, wait...
 Restarting to meta,wait....
 If drivers missing, please install CDC drivers.
 This can take up to 5 min on slow phones.
 If take too long, check device manager for drivers.
 [21]META Port Detected: MediaTek USB VCOM (Android) (COM21) 
 USB\VID_0E8D&PID_2007\5&2CF730FD&0&3 
 Start sync target, waiting responce.....
 [AP]BaseBand CPU : mt6735,S01
 [AP]APP_VER: CUN-L01C643B100
 Making target channel configuration, wait...
 Making tunnel configuration, wait...
 Rebooting to meta, wait....
 [META]BaseBand CPU : MT6735, E00
 [META]SW_VER : MOLY.LR9.W1444.MD.LWTG.MP.V42.P40
 [META]HW_VER : HQ6753_65C_B1N_L1_HW
 Phone imei[1] : 869785026377040
 Phone imei[2] : 123456789012345
 Start direct unlock[SIM1]
 Direct unlock done
 Start direct unlock[SIM2]
 Direct unlock done
 Clean Boot flag ok. 
 All done.



 Selected connection metod: SpMeta Connection
 Exe version: NCKBox AndroidMTK 1.8.7.4
 Selected phone: Ascend Y5 II
 Action : IMEI REPAIR.
 IMEI[1] for write : 352222222211116
 Curent Platform: MT6735M
 Phone must be off with battery inside. 
 Please insert USB cable now...
 [4]Detected: MediaTek PreLoader USB VCOM (Android) (COM4) 
 \\?\usb#vid_0e8d&pid_2000#5&2cf730fd&0&3#{a5dcbf10-6530-11d2-901f-00c04fb951ed} 
 Starting META mode, wait...
 Restarting to meta,wait....
 If drivers missing, please install CDC drivers.
 This can take up to 5 min on slow phones.
 If take too long, check device manager for drivers.
 [21]META Port Detected: MediaTek USB VCOM (Android) (COM21) 
 USB\VID_0E8D&PID_2007\5&2CF730FD&0&3 
 Start sync target, waiting responce.....
 Starting META using port[COM21], wait...
 Brand: HUAWEI
 Board: CUN-L01
 Model: HUAWEI CUN-L01
 Name: CUN-L01
 Release: CUN-L01C643B100
 Version: 5.1
 Platform: MT6735
 Using Algo 2.
 NVRAM Dumped OK.
 C:\Users\JAMIL MOBILE\Documents\Android_MTK\nvram_backup\META_MODE_NVRAM_MT6735_HUAWEI CUN-L01_12_25_2016_15_17_48.zip
 Reading imei
 IMEI[1]: 869785026377040
 IMEI[2]: 123456789012345
 Writing imei
 IMEI[1] TO UPDATE: 352222222211116
 Writing data, wait....
 IMEI repair OK.
 All done.


 Action : Reset to factory default.
 Selected Model: Huawei:Ascend Y5 II
 Exe version: NCKBox AndroidMTK 1.8.7.4
 Curent Platform: MT6735M
 Phone must be off with battery inside. 
 Please insert USB cable now...
 [4]Detected: MediaTek PreLoader USB VCOM (Android) (COM4) 
 \\?\usb#vid_0e8d&pid_2000#5&2cf730fd&0&3#{a5dcbf10-6530-11d2-901f-00c04fb951ed} 
 Starting META mode, wait...
 Restarting to meta,wait....
 If drivers missing, please install CDC drivers.
 This can take up to 5 min on slow phones.
 If take too long, check device manager for drivers.
 [21]META Port Detected: MediaTek USB VCOM (Android) (COM21) 
 USB\VID_0E8D&PID_2007\5&2CF730FD&0&3 
 Start sync target, waiting responce.....
 Resetting phone, wait....
 Resetting phone step 2, wait....
 Reset to factory default ok.
 All done.

BR.