Oppo 1201 16GB Read Pattern Done By NCK Box [USER REPORT] ★★★★★
 

First load the firmware if you have, then do the operation
https://i.imgur.com/xTGtcL7.png
Exe version: NCKBox AndroidMTK 1.8.8.4
Selected model: MT6571_EMMC
Action: Read Pattern
Reinsert phone battery.
Battery must be charged.
Phone must be off with battery inside.
Please insert USB cable now...
Detected : MTK USB Port (COM5)
Boot mode: Brom
Phone detected...Please wait
Sending DA agent, please wait...
Using Algo 1.
----------------------------------------------------
BaseBand CPU :MT6582
BaseBand CPU Secure Version : 05
BaseBand CPU Bootloader Version : FE
----------------------------------------------------
INT RAM: 128 KB SDRAM
EXT RAM: 1 GB DRAM
----------------------------------------------------
EMMC: (116Gb+8192Mb) SAMSUNG 0x463331324d42
EMMC FW VERSION: 06:00:00:00:00:00:00:00
EMMC CID: 15010046333132 : 000000000000000000
EMMC UA SIZE: 0x3a3e00000
BOOT STYLE: EMMC BOOT
FULL LENGTH: 0x3a4a00000 [14.572 GB]
Preloader SEC version: 2
Status: USB_FULL_SPEED
Detecting high speed port, wait......
If driver not installed, install high speed port driver.
If not need high speed port, disable it.
After repeat opperation.
Detected : MediaTek DA USB VCOM Port (COM6)
**************************************
1 2 3
4 5 6
7 8 9
Pattern: XXXXXXX
**************************************
Pattern HEX: 1DBA8E1DA015EE3F507A458F8345ED3BA45964AD
**************************************
Wait untill phone will start charging.