Orange Rise 55 MT6739 Unlock

[starXman]

Hi friends,
i unlocked this phone about one month ago,
today *******r bring it back saying the phone ask for update and now is locked again, asking for nck code...

Action : Boot Info.
Selected 0-By CPU:ELBRUS
Exe version: NCKDongle AndroidMTK 2.6.8
Reinsert phone battery.
Battery must be charged.
Phone must be off with battery inside.
Please insert USB cable now...
Detected : MediaTek PreLoader USB VCOM (Android) (COM6)
Boot mode: Preloader
Phone detected...Please wait
BBCHIP: 6739 2 cb00
Using Algo 1.
Helio MT6739 phone detected, swithing to helio api
Helio enabled DRAM in First Da: TRUE
Sending loader.....
BBCHIP MT6739
[1]Storage EMMC
EMMC FW VERSION: 00:00:00:00:00:00:00:00
EMMC CID: 700100464D4145 : 000000000000000000
EMMC UA SIZE: 0x3a8000000
BOOT STYLE: EMMC BOOT
FULL LENGTH: 0x3a8c00000 [14.637 GB]
Status: USB_HIGH_SPEED
Detecting high speed port, wait......
If driver not installed, install high speed port driver.
If not need high speed port, disable it.
After repeat opperation.
Detected : MediaTek DA USB VCOM (Android) (COM26)
FRP partition: /dev/block/platform/bootdevice/by-name/frp
Mediatek Version Release: Orange_Rise55_DS_O_T_L_V04.1_200313_MP
This phone have FRP partition.
Phone have OTP partition.
OTP IMEI: 355633100522068
Modem version: MOLY.LR12A.R2.MP.V91.25.P5
[helio]Wait untill phone will start charging.
[0]All done.

The thing is, now AndroidMTK 2.6.8 say is not supported

Exe version: NCKDongle AndroidMTK 2.6.8
Selected model: 0-By CPU ELBRUS
Reinsert phone battery.
Battery must be charged.
Phone must be off with battery inside.
Please insert USB cable now...
Detected : MediaTek PreLoader USB VCOM (Android) (COM6)
Boot mode: Preloader
Phone detected...Please wait
BBCHIP: 6739 2 cb00
Using Algo 1.
Helio MT6739 phone detected, swithing to helio api
Helio enabled DRAM in First Da: TRUE
Sending loader.....
BBCHIP MT6739
[1]Storage EMMC
EMMC FW VERSION: 00:00:00:00:00:00:00:00
EMMC CID: 700100464D4145 : 000000000000000000
EMMC UA SIZE: 0x3a8000000
BOOT STYLE: EMMC BOOT
FULL LENGTH: 0x3a8c00000 [14.637 GB]
Status: USB_HIGH_SPEED
Detecting high speed port, wait......
If driver not installed, install high speed port driver.
If not need high speed port, disable it.
After repeat opperation.
Detected : MediaTek DA USB VCOM (Android) (COM26)
Phone have OTP partition.
OTP IMEI: 355633100522068
Modem version: MOLY.LR12A.R2.MP.V91.25.P5
Reading security, wait...
[0]Unlock is not supported for this model

[helio]Wait untill phone will start charging.
[0]All done.

Can i unlock this phone for good?
Thnks in advance,
Best regards.

[orbita]

Originally Posted by starXman

Hi friends,

The thing is, now AndroidMTK 2.6.8 say is not supported

Can i unlock this phone for good?
Thnks in advance,
Best regards.

The thing is, MT6739 unlock in flash mode was never supported for generic selection.
Exception is some separate added models like alcatel, hisence, zte e.t.c.

Posible you used meta mode before?

[starXman]

No, i used flash mode as well.
I know it was reading phone locks and remaining tryes and everything.
And the nck codes, it was 12345678, off course the code was wrong,
but direct unlock worked...
Now it just says error and unlock not supported.
Any chance we get support for this?
You want me to send dump for you or something?

[orbita]

Yes, you can send security backup.
And try to unlock phone in meta mode, if meta is not protected, should work.

[starXman]

Here it is the security backup.

[orbita]

And metod what i am recommend for this phone, it work for you or not?

[starXman]

It's funny, i tryed a few times and it never worked,
now i gave it another try, to send you the log and...

Exe version: NCKDongle AndroidMTK 2.6.8
Selected model: 0-By CPU ELBRUS
Action: Unlock
Scanning for presents meta ports...
Phone must be off with battery inside.
Battery must be charged
Please insert USB cable now...
For some phones need to keep "VOL+ and VOL-" or "VOL-" button untill inserting USB cable.
[6]Detected: MediaTek PreLoader USB VCOM (Android) (COM6)
\\?\usb#vid_0e8d&pid_2000#6&be8b923&0&1#{a5dcbf10-6530-11d2-901f-00c04fb951ed}
Starting META mode, wait...
Restarting to meta,wait....
If drivers missing, please install CDC drivers.
This can take up to 5 min on slow phones.
If take too long, check device manager for drivers.
[11]META Port Detected: MediaTek USB VCOM (Android) (COM11)
USB\VID_0E8D&PID_2007\6&BE8B923&0&1
ChipID: MT6739
[MT6739]Using Algo 5
Start sync target, waiting responce.....
[META]BaseBand CPU : MT6739
[META]SW_VER : MOLY.LR12A.R2.MP.V91.25.P5
[META]HW_VER : TK_MD_BASIC_HW
[helio]Read simlock info.
IMEI Location: OTP
Phone imei[1] : 355633100522068
Phone imei[2] : 355633100522076
Start direct unlock[SIM1]
Simlock checksum is ok.
Direct unlock done
Start direct unlock[SIM2]
Simlock checksum is ok.
Direct unlock done
[0]All done.

It worked and done!

[orbita]

Indeed it's funny.
In your case work unlock in flash mode, what was not implemented for this cpu even.
And miraculous sometime work and sometime not work unlock in meta mode.

Make please once again security backup with unlocked phone.

[starXman]

Here you go!
Hope this can help improve our favorite Tool!
Best regards and stay safe.

starxman.

[farouk842000]

thank,s. .

[Todizara]

Originally Posted by starXman

Here you go!
Hope this can help improve our favorite Tool!
Best regards and stay safe.

starxman.

would you please upload full firmware please. I need the flash file