Post here Successfully Unlocked/Calculated/Flashed/Repaired Phones via NCK Dongle

[sajid01913]

Symphony i74 FRP Remove Done

Custom loader: i74_HW1_V8_20191202.loader
Phone Storage: EMMC
EXE: NckDongle Spreadtrum Module 1.3
SELECTED: SC7731C_EMMC
ACTION: Erase FRP
Custom loader: i74_HW1_V8_20191202.loader
Start Detect phone...
Phone must be off with battery inside.
Long press "VOL -" key while inserting usb cable.
For some phones need to
Long press "VOL -"+ "VOL +" key while inserting usb cable.
Keep key untill boot complete.
Detected: SPRD U2S Diag (COM3)
Sending loader, keep boot key untill loader start.
Loader OK: Spreadtrum Boot Block version 1.1
Changing bautrate OK.
Send Second Loader.
New flash metod detected.
***************
Manufacturer: SYMPHONY
Hardware: hardware_v1
Build product name: i74
Build description: i74-user 9 P00610 1578293095 release-keys
Product name: i74
Build Id: P00610
Model: i74
Android Release: 9
Android Version: i74_HW2_V13
Country: US
Security patch: 2020-02-05
This phone have frp partition.
Removing frp, wait...
Format OK.
Wait untill phone restart.

[gchipangura]

Mascom S500 successfully unlocked

ACTION: Direct Unlock
Detecting phone, wait...
Phone must be off.
Connect usb cable without pressing any key.
Using connection mode 2
Detected: SPRD U2S Diag (COM14)
Platform Version MOCORTM_W17.46.5_P4_DebugProject Version sc7715_modemBASE Version TM_BASE_W17.46.5_P4HW Version sc7715_sc7715_modem10-31-2018 184319
Build number: user 4.4.2 MocorDroid FS330_QVGA_V100_20190116_171619 test-keys
IMEI 1: 356082100012382
IMEI 2: 356082100012390
IMEI 3: 358570010103893
IMEI 4: 910575601400468
BT: 204228194435
WIFI: 00A559E97E16
Reading simlock backup, wait....
Saved to: C:\Users\Godwin\Documents\spreadtrum_module\spd_si mlock_nvram_backup\356082100012382__diag_simlock_n vram_backup_1.tar

Simlock Status:
SIMLOCK: ACTIVE
NETWORK SUBNET: INACTIVE
SP LOCK: INACTIVE
CORPORATE: INACTIVE
USER LOCK: INACTIVE
[3]Simlock Type: 0 0
Sim 1 Unlock Code: 86010313
Sim 2 Unlock Code: 86010323
Warning, this is factory key, some opperators can modify factory key.
Writing simlock...
Writing simlock ok
Done.

[sajid01913]

Winmax X50 FRP Remove Done

Custom loader: A44Power-SU375-8.1-IN-V001-20180706.loader
Phone Storage: EMMC
EXE: NckDongle Spreadtrum Module 1.3
SELECTED: SC9832E_EMMC
ACTION: Erase FRP
Custom loader: A44Power-SU375-8.1-IN-V001-20180706.loader
Start Detect phone...
Phone must be off with battery inside.
Long press "VOL -" key while inserting usb cable.
For some phones need to
Long press "VOL -"+ "VOL +" key while inserting usb cable.
Keep key untill boot complete.
Detected: SPRD U2S Diag (COM3)
Sending loader, keep boot key untill loader start.
Loader OK: Spreadtrum Boot Block version 1.1
Changing bautrate OK.
Send Second Loader.
New flash metod detected.
***************
Manufacturer: fortuneship
Hardware: sp9832e_1h10_go
Fota platform: Sprd9832_8.1
Build product name: sp9832e_1h10_go
Build description: sp9832e_1h10_gofu_osll-user 8.1.0 OPM2.171019.012 52310 release-keys
Product name: X50
Fota version: Winmax_X50_V12_20181226
Build Id: OPM2.171019.012
Model: X50
Android Release: 8.1.0
Android Version: Winmax_X50_V12_20181226
Security patch: 2018-12-05
This phone have frp partition.
Removing frp, wait...
Format OK.
Wait untill phone restart.

[KYEJUSA]

MBW KICKA5 SAFARICCOM UNLOCKED
Exe version: NCKDongle AndroidMTK 2.7.3
Selected model: 0-By CPU ELBRUS
Action: Unlock
Scanning for presents meta ports...
Phone must be off with battery inside.
Battery must be charged
Please insert USB cable now...
For some phones need to keep "VOL+ and VOL-" or "VOL-" button untill inserting USB cable.
[6]Detected: MediaTek PreLoader USB VCOM (Android) (COM6)
\\?\usb#vid_0e8d&pid_2000#6&1466078b&0&2#{a5dcbf10-6530-11d2-901f-00c04fb951ed}
Starting META mode, wait...
Restarting to meta,wait....
If drivers missing, please install CDC drivers.
This can take up to 5 min on slow phones.
If take too long, check device manager for drivers.
[179]META Port Detected: MediaTek USB VCOM (Android) (COM179)
USB\VID_0E8D&PID_2007\6&1466078B&0&2
ChipID: MT6580,S01
[MT6580,S01]Using Algo 1
Start sync target, waiting responce.....
[META]BaseBand CPU : MT6580B, E00
[META]SW_VER : MOLY.WR8.W1449.MD.WG.MP.V212.2.P3
[META]HW_VER : SAGETEL_O1MP2_K80_BSP_HSPA_HW
[generic]Read simlock info.
Phone imei[1] : 3597091
Start direct unlock[SIM1]
Direct unlock done
Clean Boot flag ok.
[0]All done.

[asms5583]

vodafone 985n unlock done

Phone must be off with battery inside.
Please insert USB cable now...
Detected : PreLoader USB VCOM Port (COM110)
Phone detected...Please wait
Sending DA agent, please wait...
BBCHIP MT6582_S00
EMMC: (29Gb+8192Mb) UNKNOWN_EMMC_DEVICE
EMMC FW VERSION: 10:00:00:00:00:00:00:00
BOOT STYLE : EMMC BOOT
Detecting high speed port, wait......
If driver not installed, install high speed port driver.
Detected : DA USB VCOM Port (COM149)
MODEL FW: V985N-2BVDES1

OTP IMEI : 352xxxxxxx56
Reading security, wait...
......SIM 1...........
Block1(N) : Locked (remain:10) Code : 06225527
Block2(NS): Unlocked
Block3(SP): Unlocked
Block4(C) : Unlocked
......SIM 2...........
Block1(N) : Locked (remain:10) Code : 06225527
Block2(NS): Unlocked
Block3(SP): Unlocked
Block4(C) : Unlocked
...............
...............
Unlocking target...please wait.
Unlock finished.
Wait untill phone will start charging.
All done.

[SandyBridge]

Reset Frp
Generis Mode - Edl
Volm up + volum down to enter Edl

Exe Version: NckDongle Qualcomm Module 0.12.7
Operation: Reset FRP
Searching for phone.....
Qualcomm HS-USB QDLoader 9008 (COM337) detected.
Hello received.
HW ID: 00000000E1B09000 MSM8936
PK HASH: CC3153A80293939B90D02D3BF8B23E0292E452FEF662C74998 421ADAD42A380F
Checking database for suitable loader.....
Arhitecture:32 bits
[32]Sending loader, please wait..
Waiting for loader to start...
[1] Send NOP ok, loader start.
CPU: MSM8936
MaxPayloadSizeFromTargetInBytes: 4096
MaxPayloadSizeToTargetInBytes: 8192
Reading partition info, wait.
Volume[0] Size: 14,68 GB Partitions count: 31
[018E3FDF]Userdata Size: 12,45 GB
Erasing FRP, wait.....
Erasing FRP, finished
Restarting phone.....
*************************************
Log saved: C:\Users\Hp\Documents\NckDongle\qualcomm_module\qc _module_Logs\reset_frp_MSM8936_00000000E1B09000_CC 3153A80293939B90D02D3BF8B23E0292E452FEF662C7499842 1ADAD42A380F1.txt
Total Time: 00:00:12
Done.

[gchipangura]

Hurricane Vortex Plus unlocked successfully

Exe version: NCKDongle AndroidMTK 2.7.2
Selected model: 0-By CPU ELBRUS
Action: Unlock
Scanning for presents meta ports...
Phone must be off with battery inside.
Battery must be charged
Please insert USB cable now...
For some phones need to keep "VOL+ and VOL-" or "VOL-" button untill inserting USB cable.
[46]Detected: MediaTek PreLoader USB VCOM (Android) (COM46)
\\?\usb#vid_0e8d&pid_2000#5&35b0af5&0&2#{a5dcbf10-6530-11d2-901f-00c04fb951ed}
Starting META mode, wait...
Restarting to meta,wait....
If drivers missing, please install CDC drivers.
This can take up to 5 min on slow phones.
If take too long, check device manager for drivers.
[47]META Port Detected: MediaTek USB VCOM (Android) (COM47)
USB\VID_0E8D&PID_2007\5&35B0AF5&0&2
ChipID: MT6580,S01
[MT6580,S01]Using Algo 1
Start sync target, waiting responce.....
[META]BaseBand CPU : MT6580B, E00
[META]SW_VER : MOLY.WR8.W1449.MD.WG.MP.V230
[META]HW_VER : BIRD_O1MP2_K80_BSP_HSPA_HW
[generic]Read simlock info.
Phone imei[1] : 358206100861443
Phone imei[2] : 358206100861450
Start direct unlock[SIM1]
Direct unlock done
Start direct unlock[SIM2]
Direct unlock done
Clean Boot flag ok.
[0]All done.

[denard]

EXE: NckDongle Spreadtrum Module 1.3
SELECTED : OT-1016G
ACTION: Unlock.
SCENARIO: SC6531.
Start Detect phone...
Phone must be off with battery inside.
Long press "VOL -" key while inserting usb cable.
For some phones need to
Long press "VOL -"+ "VOL +" key while inserting usb cable.
Keep key untill boot complete.
Detected: SPRD U2S Diag (COM4)
Sending loader, keep boot key untill loader start.
Loader OK: nckTeam(2016) Beta 0.3
CPU: 6531
FlashId: GigaDevice: [0x400000]GD25LQ32B
Reading Flash Info, wait...
Flash Size: $400000 Sector Size: $8000
NVRAM Status: NV_MINVALID_SOK
Checking nvram, wait....
Model: 1016G-3ATWIE1
Using mode 2
Writing simlock, wait...
Write Done.
Backup saved: backup\spd_nvram_backup\OT-1016G_352570093003164_saved_nv_.bin
Total Time: 00:00:17
Done.

[sajid01913]

Vivo Y81 Lock Remove Done W/O Data Lost

[VIVO MODE]Action: Reset To Factory.
Selected Vivo:Y81
Exe version: NCKDongle AndroidMTK 2.7.2
Reinsert phone battery.
Battery must be charged.
Keep VOL+ button untill inserting USB cable.
Detected : MediaTek PreLoader USB VCOM_V1632 (Android) (COM5)
Boot mode: Preloader
Phone detected...Please wait
BBCHIP: 6765 0 ca00
Using Algo 1.
Helio MT6765 phone detected, swithing to helio api
Helio enabled DRAM in First Da: FALSE
Sending loader.....
BBCHIP MT6765
[1]Storage EMMC
EMMC FW VERSION: 00:00:00:00:00:00:00:00
EMMC CID: 15010047443642 : 000000000000000000
EMMC UA SIZE: 0x747c00000
BOOT STYLE: EMMC BOOT
FULL LENGTH: 0x748800000 [29.133 GB]
Status: USB_HIGH_SPEED
Detecting high speed port, wait......
If driver not installed, install high speed port driver.
If not need high speed port, disable it.
After repeat opperation.
Detected : MediaTek DA USB VCOM (Android) (COM43)
Resetting userdata.
[--0] writing to cache
[helio]Please power phone in recovery mode(VOL +) to complete action.
[0]All done.

[sajid01913]

Huawei Ascend Y3 2017 FRP Unlock Done

Exe version: NCKDongle AndroidMTK 2.7.2
Selected model: Huawei Ascend Y3 2017 [CRO-U00C00]
[auto]Action: Reset FRP
Reinsert phone battery.
Battery must be charged.
Phone must be off with battery inside.
Please insert USB cable now...
Detected : MediaTek PreLoader USB VCOM_V1632 (Android) (COM9)
Boot mode: Preloader
BBCHIP: 6580 0 ca00
Using Algo 1.
Phone detected...Please wait
Sending DA agent, please wait...
----------------------------------------------------
BaseBand CPU :MT6580
BaseBand CPU Secure Version : FF
BaseBand CPU Bootloader Version : 01
----------------------------------------------------
INT RAM: 128 KB SDRAM
EXT RAM: 1 GB DRAM
----------------------------------------------------
EMMC: (58Gb+8192Mb) HYNIX 0x483847346132
EMMC FW VERSION: d4:00:00:00:00:00:00:00
EMMC CID: 90014A483847346132 : 00000000000000
EMMC UA SIZE: 0x1d2000000
BOOT STYLE: EMMC BOOT
FULL LENGTH: 0x1d2c00000 [7.293 GB]
Checking data, wait...

Writing FRP, wait...
FRP Reset Done.
Wait untill phone will start charging.
[0]All done.

[sajid01913]

Symphony i18 FRP Remove Done

Phone Storage: EMMC
EXE: NckDongle Spreadtrum Module 1.3
SELECTED: SC7731E_EMMC
ACTION: Erase FRP
Start Detect phone...
Phone must be off with battery inside.
Long press "VOL -" key while inserting usb cable.
For some phones need to
Long press "VOL -"+ "VOL +" key while inserting usb cable.
Keep key untill boot complete.
Detected: SPRD U2S Diag (COM3)
Sending loader, keep boot key untill loader start.
Loader OK: Spreadtrum Boot Block version 1.1
Changing bautrate OK.
Send Second Loader.
New flash metod detected.
***************
Manufacturer: Symphony
Hardware: k360_v1.1.0
Hardware version: SC7731e_2_IRD_K_V1.1.0
Build product name: i18
Build description: k360-user 9 PPR1.180610.011 1557923850 release-keys
Product name: i18
Build Id: PPR1.180610.011
Build version: K360AG_9.0_SYM_BD_BR1_08
Model: i18
Android Release: 9
Android Version: PPR1.180610.011 release-keys
Security patch: 2019-05-05
This phone have frp partition.
Removing frp, wait...
Format OK.
Wait untill phone restart.

[sajid01913]

Lenovo K10A40 FRP Unlock done

Exe version: NCKDongle AndroidMTK 2.7.2
Selected model: Lenovo K10A40
[auto]Action: Reset FRP
Reinsert phone battery.
Battery must be charged.
Phone must be off with battery inside.
Please insert USB cable now...
Detected : MediaTek PreLoader USB VCOM_V1632 (Android) (COM9)
Boot mode: Preloader
BBCHIP: 335 0 ca00
Using Algo 2.
Phone detected...Please wait
Sending DA agent, please wait...
----------------------------------------------------
BaseBand CPU :MT6735M
BaseBand CPU Secure Version : FF
BaseBand CPU Bootloader Version : 01
----------------------------------------------------
INT RAM: 128 KB SDRAM
EXT RAM: 1 GB DRAM
----------------------------------------------------
EMMC: (58Gb+8192Mb) SAMSUNG 0x464e58324d42
EMMC FW VERSION: 01:00:00:00:00:00:00:00
EMMC CID: 150100464E58324D42 : 00000000000000
EMMC UA SIZE: 0x1d2000000
BOOT STYLE: EMMC BOOT
FULL LENGTH: 0x1d2880000 [7.290 GB]
Checking data, wait...

Writing FRP, wait...
FRP Reset Done.
Wait untill phone will start charging.
[0]All done.

[sajid01913]

Symphony v120 FRP Unlock Done

Exe version: NCKDongle AndroidMTK 2.7.2
Selected model: Symphony Symphony v120
[auto]Action: Reset FRP
Reinsert phone battery.
Battery must be charged.
Phone must be off with battery inside.
Please insert USB cable now...
Detected : MediaTek PreLoader USB VCOM_V1632 (Android) (COM9)
Boot mode: Preloader
BBCHIP: 6580 0 ca00
Using Algo 1.
Phone detected...Please wait
Sending DA agent, please wait...
----------------------------------------------------
BaseBand CPU :MT6580
BaseBand CPU Secure Version : FF
BaseBand CPU Bootloader Version : 01
----------------------------------------------------
INT RAM: 128 KB SDRAM
EXT RAM: 1 GB DRAM
----------------------------------------------------
EMMC: (58Gb+8192Mb) HYNIX 0x483847346132
EMMC FW VERSION: a5:00:00:00:00:00:00:00
EMMC CID: 90014A483847346132 : 00000000000000
EMMC UA SIZE: 0x1d2000000
BOOT STYLE: EMMC BOOT
FULL LENGTH: 0x1d2c00000 [7.293 GB]
Resetting userdata.
Checking data, wait...

Writing FRP, wait...
FRP Reset Done.
Wait untill phone will start charging.
[0]All done.

[perata]

Remove FRP Itel A36(W5505)

Phone Storage: EMMC
EXE: NckDongle Spreadtrum Module 1.4
SELECTED: A36(W5505)
ACTION: Erase FRP
Start Detect phone...
Phone must be off with battery inside.
Long press "VOL -" key while inserting usb cable.
For some phones need to
Long press "VOL -"+ "VOL +" key while inserting usb cable.
Keep key untill boot complete.
Detected: SPRD U2S Diag (COM15)
Sending loader, keep boot key untill loader start.
Loader OK: Spreadtrum Boot Block version 1.1
Changing bautrate OK.
Send Second Loader.
New flash metod detected.
UID: T4PA7_2_17_6
***************
Manufacturer: ITEL MOBILE LIMITED
Hardware: sc7731e_1h10_v1.1.0
Hardware version: SC7731e_2_IRD_K_V1.1.0
Build product name: W5505
Build description: SP557_W5505_A36-user 9 PPR1.180610.011 36114 release-keys
Product name: SP557
Transsion device name: itel A36
Build Id: PPR1.180610.011
Model: itel W5505
Android Release: 9
Android Version: W5505-SP557-9.0-OP-V010-20200907
Security patch: 2020-09-05
This phone have frp partition.
Removing frp, wait...
Format OK.
Wait untill phone restart.
Log saved:
C:\Users\Mus\Documents\spreadtrum_module\Saved_Logs\Itel_itel-W5505_EraseFrp.txt
Total Time: 00:00:32
Done.

[gchipangura]

Tecno RA6 successfully unlocked

Exe version: NCKDongle AndroidMTK 2.7.3
Selected model: Tecno RA6
Action: Unlock
Scanning for presents meta ports...
Phone must be off with battery inside.
Battery must be charged
Please insert USB cable now...
For some phones need to keep "VOL+ and VOL-" or "VOL-" button untill inserting USB cable.
[10]Detected: MediaTek PreLoader USB VCOM (Android) (COM10)
\\?\usb#vid_0e8d&pid_2000#5&35b0af5&0&2#{a5dcbf10-6530-11d2-901f-00c04fb951ed}
Starting META mode, wait...
Restarting to meta,wait....
If drivers missing, please install CDC drivers.
This can take up to 5 min on slow phones.
If take too long, check device manager for drivers.
[12]META Port Detected: MediaTek USB VCOM (Android) (COM12)
USB\VID_0E8D&PID_2007\5&35B0AF5&0&2
ChipID: MT6739,S01
[MT6739,S01]Using Algo 5
Start sync target, waiting responce.....
[META]BaseBand CPU : MT6739
[META]SW_VER : MOLY.LR12A.R2.MP.V22.1.P9
[META]HW_VER : TK_MD_BASIC_HW
[helio]Read simlock info.
IMEI Location: NVRAM
Phone imei[1] : 356676091469103
Phone imei[2] : 356676091469111
Start direct unlock[SIM1]
Simlock checksum is ok.
Direct unlock done
Start direct unlock[SIM2]
Simlock checksum is ok.
Direct unlock done
[0]All done.