Tecno WX4 Pro FRP removed with NCK box [USER REPORT] ★★★★★
 

Tecno WX4 Pro FRP removed with NCK box


Exe version: NCKBox AndroidMTK 1.8.9.4
Selected model: ELBRUS
[erase]Action: Reset FRP
Reinsert phone battery.
Battery must be charged.
Phone must be off with battery inside.
Please insert USB cable now...
Detected : PreLoader USB VCOM Port (COM18)
Boot mode: Preloader
BBCHIP: 335 0 ca00
Using Algo 2.
Phone detected...Please wait
Sending DA agent, please wait...
----------------------------------------------------
BaseBand CPU :MT6737M
BaseBand CPU Secure Version : FF
BaseBand CPU Bootloader Version : 01
----------------------------------------------------
INT RAM: 128 KB SDRAM
EXT RAM: 2 GB DRAM
----------------------------------------------------
EMMC: (114Gb+16384Mb) KSI 0x454841434541
EMMC FW VERSION: 01:00:00:00:00:00:00:00
EMMC CID: 700100454841434541 : 00000000000000
EMMC UA SIZE: 0x390000000
BOOT STYLE: EMMC BOOT
FULL LENGTH: 0x390c00000 [14.262 GB]
-Reading GPT Drive OK
Checking data, wait...

Erasing FRP, wait...
FORMAT EMMC FLASH : BEGIN: 0x6a00000 - LEN: 0x100000
FRP Reset Done.
Wait untill phone will start charging.
All done.