Vodafone VFD500 Unlocking Done [USER REPORT] ★★★★★

[ballatom]

Selected connection metod: FLASH Mode
Exe version: NCKDongle AndroidMTK 2.5.7.0
Selected model: MT6735M
Action: Unlock
Reinsert phone battery.
Battery must be charged.
Phone must be off with battery inside.
Please insert USB cable now...
Detected : MediaTek PreLoader USB VCOM Port (COM270)
Phone detected...Please wait
Sending DA agent, please wait...
BaseBand CPU :MT6735M_S00
BaseBand CPU Secure Version : FF
BaseBand CPU Bootloader Version : 01
----------------------------------------------------
INT RAM: 128 KB SDRAM
EXT RAM: 1 GB DRAM
----------------------------------------------------
EMMC: (58Gb+8192Mb) TOSIBA 0x303038473730
EMMC FW VERSION: 00:00:00:00:00:00:00:00
EMMC CID: 11010030303847 : 000000000000000000
EMMC UA SIZE: 0x1d2000000
BOOT STYLE: EMMC BOOT
FULL LENGTH: 0x1d2c00000 [7.293 GB]
Status: USB_HIGH_SPEED
Detecting high speed port, wait......
If driver not installed, install high speed port driver.
If not need high speed port, disable it.
After repeat opperation.
Detecting high speed port, wait......
Detected : MediaTek DA USB VCOM (Android) (COM502)
OTP IMEI:
MODEL FROM PROINFO: V500-2AVDHU1
SECRO FROM PROINFO: X8F9FU30BP00
Reading security, wait...
Block1(N): Locked (remain:8) Code : xxxxxxxx
Block2(NS): Unlocked
Block3(SP): Unlocked
Block4(C): Unlocked
Block1(N): Locked (remain:10) Code : xxxxxxxx
Block2(NS): Unlocked
Block3(SP): Unlocked
Block4(C): Unlocked
Unlocking target...please wait.
ALGO[2]
Unlock finished.
Wait untill phone will start charging.
All done.

Calculated code wrong!!! But the unlock OK