DCT4Crypter by nok5rev & g3gg0

[bimboxX]

Originally Posted by watusi2

Will modding work?
-----------------------
After you re-encrypted a modified FlashFile you can
flash it, but your phone won't power-on. why?
We didn't track that down very deep, but when removing
the "Claudia" sequence in the flash header it will work
at least with the wrong "FAID" - that means it resets
after some time
But please make sure, you have a working, original file
flashed before you write a modded file with disabled Claudia.
Claudia is the tag in flash header starting with
D3 40 and the 0x40 bytes coming after that. Just FF the
0x40 bytes behind the tag.
-> D3 40 [0x40 bytes Claudia]
replace with
-> D3 40 [0x40 times FF]

Okay that's it
We've flashed our phones (we got after reversing the encryption)
several times - even with faulty Claudia and FAID - without any
bigger problem.
So, if you turn your phone into a brick, dont blame us...
... it's your fault!

Hello, how do I FF the 0x40 bytes after D3 40? Is it a command on DCT4Crypter?

After I FF the bytes, will the phone still have minor problems like resetting from time to time?

Thank you!

[Desirat]

Originally Posted by bimboxX

Hello, how do I FF the 0x40 bytes after D3 40? Is it a command on DCT4Crypter?

After I FF the bytes, will the phone still have minor problems like resetting from time to time?

Thank you!

Hi
This thread is for very old nokias.
Its no way related to the Nokia 100 RH-130 you have been searching for.
Don't think there is a way to edit nokia 100 firmware's like in s60v5 type phones like 5800, n97, etc AND don't think that your nokia problem is solved by editing in anyway the firmware.

Br.

[bimboxX]

Hi Desirat, how does Nokia 100 RH-130 differ from the older DCT4+ firmwares?

[johndripper]

can anybody pls upload DCT4 CrypterX v4.0 thanks

[Mark-Zone]

Originally Posted by johndripper

can anybody pls upload DCT4 CrypterX v4.0 thanks

try NSS Pro v 0.54 by B-Phreaks much better

genieprojects dot co dot uk