[HELP] Huawei AT Commands - GSM-Forum

arvie · 03-30-2010, 13:34

what is the AT Commands for:
1. Verifying if modem is lock or unlocked?
2. Sending unlock codes.
3. locking modems?
4. number of unlock trial attempts.
5. reset attempts counter <-- kahit ito na lang

I read the sticky thread about serial ports..
my modem is unlocked.. so i dont know if the command works..

fr3nsis · 03-30-2010, 13:50

1)with unaccepted sim
-> AT^CARDLOCK?
<-^CARDLOCK: 1,10,0 ............ locked
<-^CARDLOCK: 2,10,0 ............ unlocked

2)->AT^CARDLOCK="11111111" where 11111111 is code
<- OK
<- ERROR

3)i dont know
4)i dont know maybe just sniff other tool
5)i dont know maybe just sniff other tool

sergeymkl · 03-30-2010, 13:56

4. second number of reply to CARDLOCK inquiry.

Gehstock · 03-30-2010, 14:16

AT^CARDUNLOCK="NCK Code" ---> Counter Reset???

arvie · 03-30-2010, 14:29

Quote:

Originally Posted by fr3nsis

1)with unaccepted sim
-> AT^CARDLOCK?
<-^CARDLOCK: 1,10,0 ............ locked
<-^CARDLOCK: 2,10,0 ............ unlocked

Quote:

Originally Posted by sergeymkl

4. second number of reply to CARDLOCK inquiry.

<-^CARDLOCK: 1,10,0 ............ locked
<-^CARDLOCK: 2,10,0 ............ unlocked
<-^CARDLOCK: A,B,C ............
A = is to verify if locked or unlocked
B = attempts left? or total given attempts?
C = is for?

Quote:

Originally Posted by Gehstock

AT^CARDUNLOCK="NCK Code" ---> Counter Reset???

you want to say is..
if the modem is unlocked.. the counter is reset.

fr3nsis · 03-30-2010, 14:35

i dont have huawei modem for test , but using zte this are sniff for huawei reser counter

AT+CGSN<CR> [len=8]
<LF>
<CR> [len=3]
<LF>AT+CGSN<CR> [len=8]
<CR>[len=0]
<LF>358066025153304<CR> [len=16]
<LF><CR> [len=1]
<LF>OK
AT^CARDUNLOCK="bddca6434df67ee438cc790e9774319b"<C R> [len=49]
<LF>
<CR> [len=3]
<LF><CR> [len=1]
<LF>+ZUSIMR:2<CR> [len=10]
<LF>AT^CARDUNLOCK="bddca6434df67ee438cc790e9774319 b"<CR> [len=49]
<CR>[len=0]
<LF>ERROR
AT^SIMLOCK=2<CR> [len=13]
<LF>
<CR> [len=6]
<LF>AT^SIMLOCK=2<CR> [len=13]
<CR>[len=0]
<LF>ERROR
AT^CARDLOCK="59936818"<CR> [len=23]
<LF>
<CR> [len=6]
<LF>AT^CARDLOCK="59936818"<CR> [len=23]
<CR>[len=0]
<LF>ERROR
AT+CLCK="PN",0,"59936818"<CR> [len=26]
<LF>
<CR> [len=6]
<LF>AT+CLCK="PN",0,"59936818"<CR> [len=26]
<CR>[len=0]
<LF>+CME ERROR
AT^SIMLOCK=2<CR> [len=13]
<LF>
: phone failure<CR> [len=26]
<LF>AT^SIMLOCK=2<CR> [len=13]
<CR>[len=0]
<LF>ERROR

fr3nsis · 03-30-2010, 14:57

here is more readable .... on yellow sended frames

Gehstock · 03-30-2010, 15:06

Ah AT^CARDUNLOCK="HASH"

arvie · 03-30-2010, 16:49

Quote:

Originally Posted by fr3nsis

here is more readable .... on yellow sended frames

ERRORs?

AT^CARDUNLOCK="bddca6434df67ee438cc790e9774319b"<C R> [len=49] <-- COnstant values?

fr3nsis · 03-30-2010, 16:53

99,99% no

errors because is zte modem ... i dont have huawei

mustipusti · 03-30-2010, 19:17

wtf i get this

Quote:

Reading...
AT^CARDLOCK?

^CARDLOCK: 3,0,0
OK

?? what is cardlock:3???
it is a huawei E160G from t-mobile

fr3nsis · 03-30-2010, 19:45

if you know russian mybe this can help

LINK

platforms · 03-30-2010, 22:22

What about relocking it to a prefered provider?

arvie · 03-30-2010, 23:43

sir fr3nsis..
the yellow are the inputs?

dr_aybyd · 03-31-2010, 08:35

@arvie

yup the yellow colors are the inputs

-> AT^CARDLOCK?
<-^CARDLOCK: 1,10,0 ............ locked
<-^CARDLOCK: 2,10,0 ............ unlocked

See the blue color. If reply is 1 means lockec to that sim present.
if reply is 2 means unlocked to that present sim.

03-30-2010, 13:34	#1 (permalink)
arvie Junior Member Join Date: Mar 2010 Posts: 13 Member: 1268873 Status: Offline Thanks Meter: 3	[HELP] Huawei AT Commands what is the AT Commands for: 1. Verifying if modem is lock or unlocked? 2. Sending unlock codes. 3. locking modems? 4. number of unlock trial attempts. 5. reset attempts counter <-- kahit ito na lang I read the sticky thread about serial ports.. my modem is unlocked.. so i dont know if the command works..

03-30-2010, 14:16	#4 (permalink)
Gehstock Freak Poster Join Date: Jul 2005 Age: 47 Posts: 366 Member: 163721 Status: Offline Thanks Meter: 148	AT^CARDUNLOCK="NCK Code" ---> Counter Reset??? Last edited by Gehstock; 03-30-2010 at 14:23.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
thread	Thread Starter	Forum	Replies	Last Post
AT command error - help	ktele	Smart-Clip	4	02-01-2010 15:40
AT commands for initiate 3G call & send AT commands to GPRS modem from computer need	codec_romania	GSM Programming & Reverse Engineering	0	08-26-2006 07:53
AT command +CMGS NEED HELP !!!	simonloo	Old Ericsson Phones & Sony Phones	0	03-08-2004 12:33
AT commands	jonwillow	GSM Mobile Links	0	11-04-2001 15:24
How can I use AT command control Nokia6110?Help me!	arnom	Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L )	2	07-15-2000 07:35

03-30-2010, 13:50	#2 (permalink)
fr3nsis No Life Poster Join Date: Oct 2005 Location: Rome , Italy Posts: 1,530 Member: 190882 Status: Offline Sonork: BB PIN: 7C83D9CE Thanks Meter: 1,282	1)with unaccepted sim -> AT^CARDLOCK? <-^CARDLOCK: 1,10,0 ............ locked <-^CARDLOCK: 2,10,0 ............ unlocked 2)->AT^CARDLOCK="11111111" where 11111111 is code <- OK <- ERROR 3)i dont know 4)i dont know maybe just sniff other tool 5)i dont know maybe just sniff other tool

03-30-2010, 13:56	#3 (permalink)
sergeymkl Freak Poster Join Date: Jun 2009 Location: !!!! AWAY FROM BOARD, STUDY !! Posts: 363 Member: 1055354 Status: Offline Thanks Meter: 252	4. second number of reply to CARDLOCK inquiry.

03-30-2010, 14:35	#6 (permalink)
fr3nsis No Life Poster Join Date: Oct 2005 Location: Rome , Italy Posts: 1,530 Member: 190882 Status: Offline Sonork: BB PIN: 7C83D9CE Thanks Meter: 1,282	i dont have huawei modem for test , but using zte this are sniff for huawei reser counter AT+CGSN<CR> [len=8] <LF> <CR> [len=3] <LF>AT+CGSN<CR> [len=8] <CR>[len=0] <LF>358066025153304<CR> [len=16] <LF><CR> [len=1] <LF>OK AT^CARDUNLOCK="bddca6434df67ee438cc790e9774319b"<C R> [len=49] <LF> <CR> [len=3] <LF><CR> [len=1] <LF>+ZUSIMR:2<CR> [len=10] <LF>AT^CARDUNLOCK="bddca6434df67ee438cc790e9774319 b"<CR> [len=49] <CR>[len=0] <LF>ERROR AT^SIMLOCK=2<CR> [len=13] <LF> <CR> [len=6] <LF>AT^SIMLOCK=2<CR> [len=13] <CR>[len=0] <LF>ERROR AT^CARDLOCK="59936818"<CR> [len=23] <LF> <CR> [len=6] <LF>AT^CARDLOCK="59936818"<CR> [len=23] <CR>[len=0] <LF>ERROR AT+CLCK="PN",0,"59936818"<CR> [len=26] <LF> <CR> [len=6] <LF>AT+CLCK="PN",0,"59936818"<CR> [len=26] <CR>[len=0] <LF>+CME ERROR AT^SIMLOCK=2<CR> [len=13] <LF> : phone failure<CR> [len=26] <LF>AT^SIMLOCK=2<CR> [len=13] <CR>[len=0] <LF>ERROR

03-30-2010, 14:57	#7 (permalink)
fr3nsis No Life Poster Join Date: Oct 2005 Location: Rome , Italy Posts: 1,530 Member: 190882 Status: Offline Sonork: BB PIN: 7C83D9CE Thanks Meter: 1,282	here is more readable .... on yellow sended frames

03-30-2010, 15:06	#8 (permalink)
Gehstock Freak Poster Join Date: Jul 2005 Age: 47 Posts: 366 Member: 163721 Status: Offline Thanks Meter: 148	Ah AT^CARDUNLOCK="HASH"

03-30-2010, 16:53	#10 (permalink)
fr3nsis No Life Poster Join Date: Oct 2005 Location: Rome , Italy Posts: 1,530 Member: 190882 Status: Offline Sonork: BB PIN: 7C83D9CE Thanks Meter: 1,282	99,99% no errors because is zte modem ... i dont have huawei

03-30-2010, 19:45	#12 (permalink)
fr3nsis No Life Poster Join Date: Oct 2005 Location: Rome , Italy Posts: 1,530 Member: 190882 Status: Offline Sonork: BB PIN: 7C83D9CE Thanks Meter: 1,282	if you know russian mybe this can help LINK

03-30-2010, 22:22	#13 (permalink)
platforms No Life Poster Join Date: Sep 2004 Location: London Age: 44 Posts: 522 Member: 83090 Status: Offline Sonork: 1626857 Thanks Meter: 52	What about relocking it to a prefered provider?

03-30-2010, 23:43	#14 (permalink)
arvie Junior Member Join Date: Mar 2010 Posts: 13 Member: 1268873 Status: Offline Thanks Meter: 3	sir fr3nsis.. the yellow are the inputs?

03-31-2010, 08:35	#15 (permalink)
dr_aybyd Freak Poster Join Date: Mar 2005 Location: inside USB cable Age: 41 Posts: 425 Member: 128122 Status: Offline Thanks Meter: 256	@arvie yup the yellow colors are the inputs -> AT^CARDLOCK? <-^CARDLOCK: 1,10,0 ............ locked <-^CARDLOCK: 2,10,0 ............ unlocked See the blue color. If reply is 1 means lockec to that sim present. if reply is 2 means unlocked to that present sim.