Divlpt5.0 with RSA mode free - Page 3 - GSM-Forum

amigo_rk · 11-29-2004, 04:48

I used Div 5.0 and did "Read all codes" to unlock T616 (non-RSA phone). It locked all 4 locks.

I tried "reset GDFS" using Div 5.0. Div shows operation was successfull but it didn't open 4 locks.

Then, I tried "Rebuilt SP Area". After 3 - 4 minutes, it throws "Error 7302" or sometimes "error 73E2".

I really appreciate any help.

amigo_rk · 11-30-2004, 04:57

Quote:

Originally Posted by zepi

Why need instructions, everything is on the screen, just read.
You have button CHECK RSA. If RSA active, kill rsa, unlock and flash, that's all.

What option do I need to use for unlocking after disabling RSA?

Do i use
Read All codes / CLear SP locks / Rebuild SP Area??

Ejaf · 11-30-2004, 19:14

hi for everyone. I have a t610 but a can't unlock him. I have the dongle terminator LPT1, i plug the dongle corretly, i start the DIV8.4, plug the cable to the mobil, and the battery after. But i get always ERROR. My computer operats with Windows98SE. WHAT's THE PROBLEM?? Thanks in advanced

Bohosh · 11-30-2004, 19:47

@Ejaf
what error you have?

ics_igrec_zet · 11-30-2004, 19:53

Quote:

Originally Posted by Ejaf

hi for everyone. I have a t610 but a can't unlock him. I have the dongle terminator LPT1, i plug the dongle corretly, i start the DIV8.4, plug the cable to the mobil, and the battery after. But i get always ERROR. My computer operats with Windows98SE. WHAT's THE PROBLEM?? Thanks in advanced

Clean contact pads (inside and outside phone), possible water damage or bad contact. That if phone power on

B R

City · 12-03-2004, 23:10

How about K700 unlock eny solution

Ejaf · 12-04-2004, 00:37

Hi, is the 3002 ERROR. Thanks

ics_igrec_zet · 12-04-2004, 00:59

Quote:

Originally Posted by Ejaf

hi for everyone. I have a t610 but a can't unlock him. I have the dongle terminator LPT1, i plug the dongle corretly, i start the DIV8.4, plug the cable to the mobil, and the battery after. But i get always ERROR. My computer operats with Windows98SE. WHAT's THE PROBLEM?? Thanks in advanced

I`m sorry i didn`t read your post carefully, your error is because you use div8.4. and this don`t support RSA security. Start downloading div-usb cracked from http://groups.yahoo.com/group/china_...Sony-Ericsson/ and follow this procedure :

1. Select T610
2. Go to RSA field and check "Remove RSA" (then "Do selected jobs")
3. Go to unlock field and check options you need (Clear sp locks etc.) (then "Do selected jobs")
4. Flash phone with valid flash in this case only AVR if you write same version (r6c) for rsa or AVR + ARM if you want to make downgrade but take care avr+arm must be same version.

DIPDVK · 12-07-2004, 11:03

Quote:

Originally Posted by Ejaf

hi for everyone. I have a t610 but a can't unlock him. I have the dongle terminator LPT1, i plug the dongle corretly, i start the DIV8.4, plug the cable to the mobil, and the battery after. But i get always ERROR. My computer operats with Windows98SE. WHAT's THE PROBLEM?? Thanks in advanced

Plug in USB power to usb

Ejaf · 12-10-2004, 20:36

Quote:

Originally Posted by ics_igrec_zet

I`m sorry i didn`t read your post carefully, your error is because you use div8.4. and this don`t support RSA security. Start downloading div-usb cracked from http://groups.yahoo.com/group/china_...Sony-Ericsson/ and follow this procedure :

1. Select T610
2. Go to RSA field and check "Remove RSA" (then "Do selected jobs")
3. Go to unlock field and check options you need (Clear sp locks etc.) (then "Do selected jobs")
4. Flash phone with valid flash in this case only AVR if you write same version (r6c) for rsa or AVR + ARM if you want to make downgrade but take care avr+arm must be same version.

Hi. In that program, the ERROR is PHONE not power up. Do i must power up the phone manualy? Thanks

ics_igrec_zet · 12-11-2004, 19:04

No, for t610 div usb makes auto power. If you have phone not power up, then u have connector problem. Clean connector pads and chack for humidity damage.
B R

DIPDVK · 12-14-2004, 13:09

Quote:

Originally Posted by Ejaf

hi for everyone. I have a t610 but a can't unlock him. I have the dongle terminator LPT1, i plug the dongle corretly, i start the DIV8.4, plug the cable to the mobil, and the battery after. But i get always ERROR. My computer operats with Windows98SE. WHAT's THE PROBLEM?? Thanks in advanced

Use the program divlpt 5.0

City · 12-19-2004, 22:54

Quote:

Originally Posted by Ejaf

Hi. In that program, the ERROR is PHONE not power up. Do i must power up the phone manualy? Thanks

you have connection problem, or need charging Batery

Greenhorn · 12-21-2004, 00:26

yeah .................................................. .

Bangruppa Swami · 12-21-2004, 08:11

Quote:

Originally Posted by ics_igrec_zet

I`m sorry i didn`t read your post carefully, your error is because you use div8.4. and this don`t support RSA security. Start downloading div-usb cracked from http://groups.yahoo.com/group/china_...Sony-Ericsson/ and follow this procedure :

1. Select T610
2. Go to RSA field and check "Remove RSA" (then "Do selected jobs")
3. Go to unlock field and check options you need (Clear sp locks etc.) (then "Do selected jobs")
4. Flash phone with valid flash in this case only AVR if you write same version (r6c) for rsa or AVR + ARM if you want to make downgrade but take care avr+arm must be same version.

Namaste Swami, First i have to Remove RSA from the mobile and then i have to go to unlock field & then clear sp locks etc... but after all this please Swami tell me where i can download the complete flash file ? and please tell me what is AVR and ARM ?

Dhanewad

11-29-2004, 04:48	#31 (permalink)
amigo_rk Freak Poster Join Date: Oct 2004 Age: 49 Posts: 144 Member: 88444 Status: Offline Thanks Meter: 0	4 locks closed I used Div 5.0 and did "Read all codes" to unlock T616 (non-RSA phone). It locked all 4 locks. I tried "reset GDFS" using Div 5.0. Div shows operation was successfull but it didn't open 4 locks. Then, I tried "Rebuilt SP Area". After 3 - 4 minutes, it throws "Error 7302" or sometimes "error 73E2". I really appreciate any help.

12-21-2004, 00:26	#44 (permalink)
Greenhorn Freak Poster Join Date: Oct 2003 Location: Oslo Age: 41 Posts: 497 Member: 41299 Status: Offline Thanks Meter: 16	yeah yeah .................................................. .

Similar Threads
thread	Thread Starter	Forum	Replies	Last Post
Free SamSS v1.0.0.8 E250d, E250i free unlock and server connection fixed.	mr khalid	Samsung Flashers, Software, Firmware.	0	03-02-2010 20:50
SE T610 dead no boot with RSA no boot with GO	gsm2	Twisterflasher	2	01-01-2005 01:03
Divlpt5.0 with RSA mode free	dvk	Sony Ericsson	7	10-23-2004 10:07
Very strange case with fighter and T630 with RSA Active	NeTRaW	Cruiser Suite	4	08-09-2004 18:25
Direct IMEI writer 4.0 with BA20 support free here	anry	x1x to x45/x50	11	10-27-2002 22:35

11-30-2004, 19:14	#33 (permalink)
Ejaf Freak Poster Join Date: Feb 2004 Location: PORTUGAL Age: 43 Posts: 103 Member: 54200 Status: Offline Thanks Meter: 0	hi for everyone. I have a t610 but a can't unlock him. I have the dongle terminator LPT1, i plug the dongle corretly, i start the DIV8.4, plug the cable to the mobil, and the battery after. But i get always ERROR. My computer operats with Windows98SE. WHAT's THE PROBLEM?? Thanks in advanced

11-30-2004, 19:47	#34 (permalink)
Bohosh No Life Poster Join Date: Aug 2002 Posts: 1,948 Member: 14741 Status: Offline Thanks Meter: 119	@Ejaf what error you have?

12-03-2004, 23:10	#36 (permalink)
City Insane Poster Join Date: Mar 2004 Age: 43 Posts: 65 Member: 59186 Status: Offline Thanks Meter: 1	How about K700 unlock eny solution

12-04-2004, 00:37	#37 (permalink)
Ejaf Freak Poster Join Date: Feb 2004 Location: PORTUGAL Age: 43 Posts: 103 Member: 54200 Status: Offline Thanks Meter: 0	Hi, is the 3002 ERROR. Thanks

12-11-2004, 19:04	#41 (permalink)
ics_igrec_zet No Life Poster Join Date: Feb 2004 Location: ROMANIA Age: 46 Posts: 861 Member: 55427 Status: Offline Thanks Meter: 7	No, for t610 div usb makes auto power. If you have phone not power up, then u have connector problem. Clean connector pads and chack for humidity damage. B R