GSM-Forum

GSM-Forum (https://forum.gsmhosting.com/vbb/)
-   Sony Ericsson (https://forum.gsmhosting.com/vbb/f84/)
-   -   F.A.Q About SonyEricsson DB2000/10/12/20/3150/3210/3350/pnx5230 Series (https://forum.gsmhosting.com/vbb/f84/f-q-about-sonyericsson-db2000-10-12-20-3150-3210-3350-pnx5230-series-528732/)

::.::RAMJAN::.:: 04-21-2008 20:33

F.A.Q About SonyEricsson DB2000/10/12/20/3150/3210/3350/pnx5230 Series
 
Frequently Asked Questions About SonyEricsson DB2000/10/12/20/3150/3210/3350/pnx5230 Series
READ BEFORE ASKING ANYTHING !


Q-1. What is DB2000/10/12/20/3150/3210/3350/pnx5230 Series ?
A. SEMC (Sony Ericsson Mobile Communications) hardware platforms. that is chipsets of new SEMC phones.

Db2000 (otherwise called marita "full") is inside next phones: z1010/v800/z800/w900/lg3g/sharp3g
Db2010 (otherwise called "marita compact") is inside j300/k300/k500/k700/s700/k750 phones.
Db2020 (otherwise called "marika") is inside k610/k550/k790/k800/w850/w880/z610/well, almost in all new phones.
Pnx5230 is inside z310,w350,w380,z555 phones.
Db3150 is A2 generation, phones like k850,w910,w890,z750,etc have it
Db3210 is next revision of A2 platform and there is not yet retail phones released with that ASIC.
Db3350 is even future platform from SEMC.



Q-2. how to check Sony ericsson firmware version ?
A. > * < < * < * Where < or > are directions on the joystick, and * is the bottom left hand button on the keypad.



Q-3. What Is firmware Version?
A. firmware Version Which Ur Phone Have. You Must Flash Same Version Or Newer Then It MAIN Or fs File To Phone Only..



Q-4. How to enter my Unlock Code on SonyEricsson ?
A. Model : All SonyEricsson
1 - Switch ON your phone without SIM Card,
2 - Press 1 time the left arrow,
3 - Press 2 times the button * ,
4 - Press 1 time the left arrow,
5 - The message "Personalize with MNC2" will appear,
6 - You can now enter the Unlock Code we send to you.
If your phone have a "JOGDIAL" (ex : SonyEricsson K700i) you must press "down arrow" instead of
"left arrow" for step 2 & 3. We mean by "Down Arrow" to direct the Jogdial down !
W950 And Others Scrool Models
Service Menu (* up * down down * down *)
Code Menu (* up * down ** down (up/down using the jog dial on the side)
( side, down,**,down )



Q-5. What Is Cid ?
A. This "number" defines the version of SE's protection present in the phone. New CIDs are deployed from time to time.
Current CIDs in use by SE are 29/36/37/49/50/51/52 & now 53.



Q-6. What Is GDFS?
A. This is the phones "stash", where all settings and calibration data is stored (this also goes for the firmwares IMEI-resource as well as the SIMlocks). Similar to other brands use of NVRAM (Non-Viotile Random Access Memory).



Q-7. What is custpacks ?
A. Custpacks are zip-files containing ORIGINAL customization files. These serve as basic configuration files for the handset, which languages to allow, data accounts, branding etc...



Q-8. how Many Way to connect semc phones with pc ?
A. there are two way to connect phone with pc
a. Ftdi Base Ports
b. DCU60 usb cable



Q-9. how to connect semc phone with pc by DCU60 usb cable ?
A. Flash Mode> Turn of the phone , Press the button connect (option button)
Hold "C" button on the phone and connect the DCU-60 cable
Recovery Mode> 2 + 5 Both Press And Insert DCU60 cable
PHONE MODE> INSERT orginal/test SIM CARD, FULLY TURN on PHONE AND ATTACH phone with pc BE SURE THAT YOU SET PHONE IN "PHONE MODE" IF ASKED, INSTALL PHONE Sign Drivers



Q-10. where i get usb flash drivers for dcu-60 cable ?
A. download link



Q-11. from where i get Sign Drivers for CSCA procedure ?
A. download link



Q-12. what is XS++ & which semc Series supported ?
A. free SonyEricsson customization tool , XS++ Help and Information & here XS++ download link


Q-13. How To Flash Phone With XS ++?
A. Start xs++
Turn of the phone.
Press the button connect.
Hold "C" button on the phone and connect the DCU-60 cable.
if CID is lower then 52 xs++ will ask you if you want to upgrade CID press yes.
Tick flash main firmware and browse for your main.
Tick flash file system and browse for your fs.
Tick customize file system select phone model and region.
Press the flash button and wait.



Q-14. how to Upgrade CID DB2020 with xs++ (cid49 to 52) ?
A . Start xs++
Turn of the phone.
Press the button connect.
Hold "C" button on the phone and connect the DCU-60 cable.
if CID is lower then 52 xs++ will ask you if you want to upgrade CID press yes.



Q-15. What Is Rezone We Need Se Tool 2 Lite ?
[1] To Flash Firmware To Phone [2] Firmware File upgrade To Phone. [3] All DB2020 CID49/51/52 & DB2010/12 49 unlock ....link here



P.s : more information will be added soon:)
Best Regards
::.::RAMJAN::.::@TRUST GSM™

::.::RAMJAN::.:: 04-22-2008 07:32

Quote:

Originally Posted by doktorx01 (Post 3258172)
i need master reset password wor my soniericsson w200i

@doktorx01 welcome to gsmhosting.

Start setool2liteV1.11
Turn of the phone.
Press the button identify
Hold "C" button on the phone and connect the DCU-60 cable ,you can see your phone user code.

doktorx01 04-22-2008 17:50

when i turn on my phone w200i ask phone lock code is there a master unlock code :confused:
i kant turn on mu phone i forgot my code
  • setool2liteV1.11 ver can i find it

it vill help thet user code

::.::RAMJAN::.:: 04-22-2008 19:39

Quote:

Originally Posted by doktorx01 (Post 3260135)
when i turn on my phone w200i ask phone lock code is there a master unlock code :confused:
i kant turn on mu phone i forgot my code
  • setool2liteV1.11 ver can i find it

it vill help thet user code


setool2liteV1.11 download link here

doktorx01 04-23-2008 23:09

after conekting the phone what tu du i wait 10min and noting

when i klick stop ses can`t load id loader

w200i what if i flash it vith xs++ vill ask phone lock code

kanapuza 06-04-2008 11:25

hi frnd can y tellme how to network unlock in w880
its possible in my setool

v0.914034/UNI
CARD SERIAL: 00068373
Loaded 51 flash descriptors
ChipID:9900,EMP protocol:0301

PHONE IS RED RETAIL PRODUCT
FLASH CID detected:53
Speed:921600
Flash ID check:897E
Flash props sent ok
OTP LOCKED:1 CID:51 PAF:1 IMEI:35**********40 CERT:RED
FLASH CID:53 COLOR:RED

Model:W880i
Brand:Generic
MAPP CXC article: R6BC002 prgCXC1250640_GENERIC_AI
MAPP CXC version: R6BC002
Language Package:AMERICA_1
CDA article: CDA12345678/123
CDA version: R2A
Default article: cxc1250651
Default version: R6BC002
PROVIDER: 234-15
Network LOCKED

RESTORATION FILE PRESENT FOR DETECTED FIRMWARE

BYPASS PACKAGE PRESENT FOR DETECTED FIRMWARE

SECURITY UNITS BACKUP CREATED.
Elapsed: 6 secs.



3 . What Is firmware Version?
A. firmware Version Which Ur Phone Have. You Must Flash Same Version Or Newer Then It MAIN Or fs File To Phone Only..


4 .How to enter my Unlock Code on SonyEricsson ?
A . Model : All SonyEricsson

1 - Switch ON your phone without SIM Card,
2 - Press 1 time the left arrow,
3 - Press 2 times the button * ,
4 - Press 1 time the left arrow,
5 - The message "Personalize with MNC2" will appear,
6 - You can now enter the Unlock Code we send to you.

If your phone have a "JOGDIAL" (ex : SonyEricsson K700i) you must press "down arrow" instead of
"left arrow" for step 2 & 3. We mean by "Down Arrow" to direct the Jogdial down !

W950 And Others Scrool Models
Service Menu (* up * down down * down *)
Code Menu (* up * down ** down (up/down using the jog dial on the side)
( side, down,**,down )

5 . What Is Cid?
A . This "number" defines the version of SE's protection present in the phone. New CIDs are deployed from time to time.
Current CIDs in use by SE are 29/36/37/49/50/51/52 & now 53.

6 . What Is GDFS?
A . This is the phones "stash", where all settings and calibration data is stored (this also goes for the firmwares IMEI-resource as well as the SIMlocks). Similar to other brands use of NVRAM (Non-Viotile Random Access Memory).


7 . What Is Rezone We Need XS ++?
A. [1] To Flash Firmware To Phone [2] Firmware File upgrade To Phone [3] customize phone ...link here (http://forum.gsmhosting.com/vbb/show...75&postcount=5)



8 . how to connect phone with pc?
A . Turn of the phone.
Press the button connect (option button)
Hold "C" button on the phone and connect the DCU-60 cable


9 . How To Flash Phone With XS ++?
A . Start xs++
Turn of the phone.
Press the button connect.
Hold "C" button on the phone and connect the DCU-60 cable.
if CID is lower then 52 xs++ will ask you if you want to upgrade CID press yes.
Tick flash main firmware and browse for your main.
Tick flash file system and browse for your fs.
Tick customize file system select phone model and region.
Press the flash button and wait.



10 .What Is Rezone We Need Se Tool 2 Lite ?
[1] To Flash Firmware To Phone [2] Firmware File upgrade To Phone. [3] All DB2020 CID49/51/52 & DB2010/12 49 unlock ....link here (http://www.4shared.com/file/22625295..._V110.html?s=1)



11 . where i get usb flash drivers for dcu-60 cable ?
A . link is here (http://forum.gsmhosting.com/vbb/show...75&postcount=5)



12 .how to Upgrade CID DB2020 with xs++ (cid49 to 52) ?
A . Start xs++
Turn of the phone.
Press the button connect.
Hold "C" button on the phone and connect the DCU-60 cable.
if CID is lower then 52 xs++ will ask you if you want to upgrade CID press yes.



HOPE THIS CAN HELP ALL..

note : i will update this thread day by day..

BEST REGARDS
::.::RAMJAN::.::@TRUST_G.S.M™[/QUOTE]


hi frnd can u telme how to network unlock in w880
its possible in my setool






v0.914034/UNI
CARD SERIAL: 00068373
Loaded 51 flash descriptors
ChipID:9900,EMP protocol:0301

PHONE IS RED RETAIL PRODUCT
FLASH CID detected:53
Speed:921600
Flash ID check:897E
Flash props sent ok
OTP LOCKED:1 CID:51 PAF:1 IMEI:35**********40 CERT:RED
FLASH CID:53 COLOR:RED

Model:W880i
Brand:Generic
MAPP CXC article: R6BC002 prgCXC1250640_GENERIC_AI
MAPP CXC version: R6BC002
Language Package:AMERICA_1
CDA article: CDA12345678/123
CDA version: R2A
Default article: cxc1250651
Default version: R6BC002
PROVIDER: 234-15
Network LOCKED

RESTORATION FILE PRESENT FOR DETECTED FIRMWARE

BYPASS PACKAGE PRESENT FOR DETECTED FIRMWARE

SECURITY UNITS BACKUP CREATED.
Elapsed: 6 secs.

angel0807 07-04-2008 12:59

i need help ramjan. i cant seem to send u pm

wadood 07-22-2008 11:32

w200
 
salam all.

i have same problum in w200 unlocking. in setool when i identify the fone it sayes "Bypass pakage not present you must flash supported firmware to use alternative security baypass"

plz help me what can i doo.:confused:

poppme 07-24-2008 09:21

Bypass pakage
 
if you need the cellphone code, look up a bit in the status text.
there will be a note "Code 4-8digits"
thats you lock code to enter when you restart you phone

blackfox888 07-28-2008 16:21

Hi I have a SE w880i DB2020 CID 53. I trying to backup gdfs b4 i unl0ck phone I use xs++ but i get a message saying:

15:40:40| Sorry, your phone is NOT SUPPORTED
15:40:40| Error: Failed to send CSLoader!
15:40:40| FSX Shutdown!
15:40:42| Disconnected... Unplug the phone

When i use setool2 lite v1.11 to backup gdfs it doesn't work too, it say:

ChipID:9900,EMP protoco;0301
PHONE IS RED RETAIL PRODUCT
FLASH CID detected:53
Speed:9212600
OTP LOCKED:1 CID:51 PAF: IMEI....... CERT:RED
FLASH CID:53 COOUR:RED
Can't built loaders chain ;(

does this mean i can't unlock my SE w880i on CID 53??

deal1975 07-31-2008 15:40

hello some one can help me unlocked my SE W910i with setool logs 98

gsmsolutionsl 08-11-2008 19:00

Hey,Can anyone help me ....Any phone i try to flash or unlock with setool3 dcu60 cable bypasspackage not present....I try several time to download from sopport but always corrupt when i try to extrat from winzip or winrar......What should do"""

alamgarh 10-07-2008 17:11

But where i can get all setool 2 lite flash files and costomize file.s

djibrilcoulibal 10-14-2008 07:35

my USB cable is not dcu 60 and when I made with red GDFS setools lite sort it supported only 60 dcu

Ravisushil 10-29-2008 15:45

where i can get all setool 2 lite flash files :p


All times are GMT +1. The time now is 03:07.


vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2022 DragonByte Technologies Ltd.
- GSM Hosting Ltd. - 1999-2017 -

Page generated in 0.16483 seconds with 6 queries

SEO by vBSEO