::.:: Free REPAIRING EROM GUIDES for most sonyericsson phones ::.:: - GSM-Forum

::.::RAMJAN::.:: · 03-26-2008, 20:46

REPAIRING EROM GUIDES for most sonyericsson phones dcu-60 cable required !!

Important information
your erom only really needs repairing if it's dead or damaged, a sign of a dead erom is normally a blinking red led in the infra red port.
Do NOT Flash different EROM Phone Model to your phone,
You need to use same CID in EROM as your phone EROM CID. example:You can NOT flash K800 CID51 EROM
to a K800 CID49 Phone.You can flash K800 CID49 EROM to a K800 CID49 Phone
Verify which is your EROM's version, it will be in xs++ logs or setool logs, or connect to xs++ and it will tell you look for this EROM CID: .

xs++3.1 guide needed files
xs++3.1, 4shared.com - online file sharing and storage - download XS++.rar
usb flash drivers for dcu-60 cable, 4shared.com - online file sharing and storage - download gg-setup.exe
cruiser drivers, 4shared.com - free file sharing and storage - share folder
eroms, SE-NSE Forums (Powered by Invision Power Board)

SETOOL 2 LITE 1.10 guide needed files
setool 2 lite 1.10, 4shared.com - free file sharing and storage - share folder
drivers , when you extract setool there will be a folder called drivers all drivers are in there

xs++3.1 erom repair guide, works with dcu-60, works with db2010 cid 36, cid 49, db2012 cid 50 cid 51 cid52, db2020 cid 49 cid 51 cid 52
step A selecting the correct erom, the erom must be in a .bin format.
a.Turn off the phone, remove the battery, sim and memory card,
b.run xs++.exe and press connect, if your using a cruiser cable you must select the correct com port from the drop down select port box.
c.now reinsurt your battery and connect the phone holding down C.
d.you are now connected to xs++.

i have highlighted what needs to match when choosing your new erom.
Platform: <<<some erom files don't contain this information, but longs u match up the rest of the information it will be fine.
EROM CID: <<< very important must match your erom file 100% Don't confuse with the OTP CID.
EROM Color: <<< most eroms and phones are red
Phone ID: <<< very important must match your erom file 100%
STEP B flashing the erom
1.Turn off the phone, remove the battery, sim and memory card,
2.run xs++.exe and press connect, if your using a cruiser cable you must select the correct com port from the drop down select port box.
3.now reinsurt your battery and connect the phone holding down C.
4.you are now connected to xs++.
5.Select your EROM's file in .bin format with the box Flash Main Firmware like this

6.press FLASH.

SETOOL 2 LITE 1.10 erom repair guide dcu-60 , supported DB2010/DB2012 CID49/50/51/52, DB2020 CID49/51/52
a.Turn off the phone, remove the battery, sim and memory card,
1.unzip and run setool2 lite 1.08
2.select phone type from phone type drop-down list,
3.press identify
4.reinsurt battery and holding down 2+5 connect the phone
5.press the unlock/repair button

romelod7 · 03-26-2008, 21:13

thanks alot, this helped me as i wanted to repir a dead k750!!!

gobindopura · 03-26-2008, 21:18

sonyericsson phones dcu-60 cable DRIBER HELP ME

Simri · 03-27-2008, 01:05

EROM-FOTA is not same as EROM

EROM = Extended ROM
This is the base part of the software which isn't flashed in normal update operations. It controls the flashing interface, the boot loader, etc. Contains primary certificate.

FOTA = Flash Over The Air
The Sony Ericsson Remote Update Service is a convenient way to easily and remotely update your mobile phone to the latest available software version. This is done over the air; no connection to a PC is needed. The cost for using Sony Ericsson Remote Update Service is your operator's fee for transferring the data to your phone. This varies widely between different operators; if you are uncertain you should contact your operator. User content in the phone, such as images, music, ringtones and videos, is not affected by the update.

::.::RAMJAN::.:: · 03-27-2008, 02:41

download link here

xs++3.1 guide needed files
xs++3.1,
usb flash drivers for dcu-60 cable

SETOOL 2 LITE 1.10 guide needed files
setool 2 lite 1.10
drivers , when you extract setool there will be a folder called drivers all drivers are in there

::.::RAMJAN::.:: · 03-27-2008, 03:01

here some DB2020 EROM collection

::.::RAMJAN::.:: · 03-27-2008, 03:04

DB2020 EROM collection

::.::RAMJAN::.:: · 03-27-2008, 03:11

DB2010 EROM collection

aashir · 03-27-2008, 05:57

ramjan.. setool 2 lite 1.10 link not working

::.::RAMJAN::.:: · 03-27-2008, 06:40

Quote:

Originally Posted by aashir

ramjan.. setool 2 lite 1.10 link not working

http://www.4shared.com/file/34141410...eV111.html?s=1

aashir · 03-27-2008, 06:53

Quote:

Originally Posted by ::.::RAMJAN::.::

http://www.4shared.com/file/34141410...eV111.html?s=1

thanks for quick reply

::.::RAMJAN::.:: · 03-27-2008, 16:53

some DB2000 EROM collection

Shotgun100 · 04-08-2008, 22:24

Wot do u do if none of the progs detect the phone? U cant repair the EROM?

modou · 04-08-2008, 22:52

Quote:

Originally Posted by Shotgun100

Wot do u do if none of the progs detect the phone? U cant repair the EROM?

install usb cable driver press 2+5 and insert cable

Umbabaraumba · 04-08-2008, 23:10

THANKS BROTHER - very good work!!!

03-26-2008, 20:46	#1 (permalink)
::.::RAMJAN::.:: No Life Poster Join Date: Apr 2006 Location: Hong Kong \| USA Age: 35 Posts: 3,718 Member: 258172 Status: Offline Thanks Meter: 10,367	::.:: Free REPAIRING EROM GUIDES for most sonyericsson phones ::.:: REPAIRING EROM GUIDES for most sonyericsson phones dcu-60 cable required !! Important information your erom only really needs repairing if it's dead or damaged, a sign of a dead erom is normally a blinking red led in the infra red port. Do NOT Flash different EROM Phone Model to your phone, You need to use same CID in EROM as your phone EROM CID. example:You can NOT flash K800 CID51 EROM to a K800 CID49 Phone.You can flash K800 CID49 EROM to a K800 CID49 Phone Verify which is your EROM's version, it will be in xs++ logs or setool logs, or connect to xs++ and it will tell you look for this EROM CID: . xs++3.1 guide needed files xs++3.1, 4shared.com - online file sharing and storage - download XS++.rar usb flash drivers for dcu-60 cable, 4shared.com - online file sharing and storage - download gg-setup.exe cruiser drivers, 4shared.com - free file sharing and storage - share folder eroms, SE-NSE Forums (Powered by Invision Power Board) SETOOL 2 LITE 1.10 guide needed files setool 2 lite 1.10, 4shared.com - free file sharing and storage - share folder drivers , when you extract setool there will be a folder called drivers all drivers are in there xs++3.1 erom repair guide, works with dcu-60, works with db2010 cid 36, cid 49, db2012 cid 50 cid 51 cid52, db2020 cid 49 cid 51 cid 52 step A selecting the correct erom, the erom must be in a .bin format. a.Turn off the phone, remove the battery, sim and memory card, b.run xs++.exe and press connect, if your using a cruiser cable you must select the correct com port from the drop down select port box. c.now reinsurt your battery and connect the phone holding down C. d.you are now connected to xs++. i have highlighted what needs to match when choosing your new erom. Platform: <<<some erom files don't contain this information, but longs u match up the rest of the information it will be fine. EROM CID: <<< very important must match your erom file 100% Don't confuse with the OTP CID. EROM Color: <<< most eroms and phones are red Phone ID: <<< very important must match your erom file 100% STEP B flashing the erom 1.Turn off the phone, remove the battery, sim and memory card, 2.run xs++.exe and press connect, if your using a cruiser cable you must select the correct com port from the drop down select port box. 3.now reinsurt your battery and connect the phone holding down C. 4.you are now connected to xs++. 5.Select your EROM's file in .bin format with the box Flash Main Firmware like this 6.press FLASH. SETOOL 2 LITE 1.10 erom repair guide dcu-60 , supported DB2010/DB2012 CID49/50/51/52, DB2020 CID49/51/52 a.Turn off the phone, remove the battery, sim and memory card, 1.unzip and run setool2 lite 1.08 2.select phone type from phone type drop-down list, 3.press identify 4.reinsurt battery and holding down 2+5 connect the phone 5.press the unlock/repair button

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Free repair flash file for chaina phone	SE-THAILAND	Chinese Models & Cloned Phones	15	03-09-2010 16:18
Hardware solution guide for china mobile phones.	hmyeamin	Chinese Models & Cloned Phones	0	01-25-2010 07:56
REPAIRING EROM GUIDES for most sonyericsson phones	NADEEM GONDAL	SETool2	16	07-18-2009 09:10
:: Guide for Getting Your Own Certificate ::	j4m3st3r	Nokia Multimedia	5	06-06-2008 12:57
Free logs for Unlocking SonyEricsson phones with R6C005 Firmware!	maxxnskk	Phone Unlocking Codes & Maps	26	08-21-2004 16:19

03-26-2008, 21:13	#2 (permalink)
romelod7 Crazy Poster Join Date: Jan 2003 Location: Namibia Age: 45 Posts: 59 Member: 20626 Status: Offline Thanks Meter: 5	thanks alot, this helped me as i wanted to repir a dead k750!!!

03-26-2008, 21:18	#3 (permalink)
gobindopura Freak Poster Join Date: Apr 2007 Location: bangladesh Posts: 259 Member: 487537 Status: Offline Thanks Meter: 61	sonyericsson phones dcu-60 cable DRIBER HELP ME

03-27-2008, 01:05	#4 (permalink)
Simri Freak Poster Join Date: Oct 2006 Location: Sweden Age: 46 Posts: 146 Member: 374297 Status: Offline Thanks Meter: 51	EROM-FOTA is not same as EROM EROM = Extended ROM This is the base part of the software which isn't flashed in normal update operations. It controls the flashing interface, the boot loader, etc. Contains primary certificate. FOTA = Flash Over The Air The Sony Ericsson Remote Update Service is a convenient way to easily and remotely update your mobile phone to the latest available software version. This is done over the air; no connection to a PC is needed. The cost for using Sony Ericsson Remote Update Service is your operator's fee for transferring the data to your phone. This varies widely between different operators; if you are uncertain you should contact your operator. User content in the phone, such as images, music, ringtones and videos, is not affected by the update.

03-27-2008, 02:41	#5 (permalink)
::.::RAMJAN::.:: No Life Poster Join Date: Apr 2006 Location: Hong Kong \| USA Age: 35 Posts: 3,718 Member: 258172 Status: Offline Thanks Meter: 10,367	download link here xs++3.1 guide needed files xs++3.1, usb flash drivers for dcu-60 cable SETOOL 2 LITE 1.10 guide needed files setool 2 lite 1.10 drivers , when you extract setool there will be a folder called drivers all drivers are in there

03-27-2008, 05:57	#9 (permalink)
aashir No Life Poster Join Date: Jan 2004 Location: india Posts: 1,450 Member: 50772 Status: Offline Sonork: 100.1590990 Thanks Meter: 318	ramjan.. setool 2 lite 1.10 link not working

04-08-2008, 22:24	#13 (permalink)
Shotgun100 Junior Member Join Date: Apr 2008 Location: Crewe,Cheshire Age: 53 Posts: 4 Member: 745486 Status: Offline Thanks Meter: 2	Wot do u do if none of the progs detect the phone? U cant repair the EROM?

04-08-2008, 23:10	#15 (permalink)
Umbabaraumba No Life Poster Join Date: May 2005 Location: Bulgaria Age: 49 Posts: 1,800 Member: 142632 Status: Offline Sonork: 100.1589012 Thanks Meter: 459	THANKS BROTHER - very good work!!!