Software Document Listing By SonyEricsson - Page 2 - GSM-Forum

gsm-lord · 10-08-2008, 22:05

Background:
Unfortunately due to a calibration error a batch of R306 units will show a warning message "Serious error. Stop charging. Stop using your phone. Contact a Sony Ericsson Call Centre" when fully charged.
The cause is only a measuring problem, so there is no risk to the customer.

Solution:
The unit should be swapped since there is no way to fix the message with repair equipment.

Please send these units to SBE or according instruction from your local Sony Ericsson company.
Please see below document for the affected IMEI / Market.

gsm-lord · 10-09-2008, 23:38

UKG RSI – R306 Low Battery Voltage Behaviour
Description:
If the battery level is 3.2V or below, the R306 can not power on by pressing power on even with the charger attached.

Solution:
If the R306 appear dead and do not start, keep the phone in the charger for at least 10 min and see if the charging icon appears

huier-ting · 06-11-2011, 07:31

SI-G900/G700 restart after flashing

Information
This is a information/clarification for G900 and G700:

After you have flashed the units in Emma Service Client you should remove the battery and then re-insert the battery again before you restart the unit.

If you don't do this it could happend that the unit dosn't start up.

This effects RTL and MR1 sw on all kits.

A solution is planned for the MR2 sw.

This is NOT effecting P1 or W960.

bincythomas · 02-13-2012, 08:49

Dear sir;

Need Arabic soft for M1i (I have setool but i don't found where is Arabic version) please you help me.

kang85 · 08-08-2016, 20:00

SI-G900/G700 restart after flashing

Information
This is a information/clarification for G900 and G700:

After you have flashed the units in Emma Service Client you should remove the battery and then re-insert the battery again before you restart the unit.

If you don't do this it could happend that the unit dosn't start up.

This effects RTL and MR1 sw on all kits.

A solution is planned for the MR2 sw.

This is NOT effecting P1 or W960.

Bajwa786 · 04-29-2017, 10:00

Need sony so-04e firmware???

Firmware details:
FS Id: DCM-LTE
FS version: 10.3.1.B.2.42
S1_ROOT: S1_Root_5ca3,S1_Root_Test_b316

please send me this file!!!

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Repair Information Document Listing By Sonyericsson	SEMCSEC	Sony Ericsson Hardware Repair	5	09-10-2009 01:37
Beginner quastion (right software and list of mobiles)	Ciux	VygisToolbox	3	01-15-2008 15:42
new software dp list	mortal90210	Nokia Base Band 5 ( BB-5 )	2	08-24-2007 10:16
@SHA / HWK Team please check here often , because this is a Software Bug List	MisterX GSMFREE	HWK	2	11-17-2005 02:14
Document listing for every GSM Phone made to date	jbes	Wanted Products	2	05-07-2004 10:20

10-08-2008, 22:05	#16 (permalink)
gsm-lord Cheater -Don't Deal with him- Join Date: Nov 2001 Location: IRAN Age: 49 Posts: 557 Member: 7250 Status: Offline Sonork: 100.1575042 Thanks Meter: 440	Background: Unfortunately due to a calibration error a batch of R306 units will show a warning message "Serious error. Stop charging. Stop using your phone. Contact a Sony Ericsson Call Centre" when fully charged. The cause is only a measuring problem, so there is no risk to the customer. Solution: The unit should be swapped since there is no way to fix the message with repair equipment. Please send these units to SBE or according instruction from your local Sony Ericsson company. Please see below document for the affected IMEI / Market.

10-09-2008, 23:38	#17 (permalink)
gsm-lord Cheater -Don't Deal with him- Join Date: Nov 2001 Location: IRAN Age: 49 Posts: 557 Member: 7250 Status: Offline Sonork: 100.1575042 Thanks Meter: 440	UKG RSI – R306 Low Battery Voltage Behaviour Description: If the battery level is 3.2V or below, the R306 can not power on by pressing power on even with the charger attached. Solution: If the R306 appear dead and do not start, keep the phone in the charger for at least 10 min and see if the charging icon appears

06-11-2011, 07:31	#18 (permalink)
huier-ting Junior Member Join Date: May 2011 Posts: 37 Member: 1583021 Status: Offline Thanks Meter: 4	SI-G900/G700 restart after flashing Information This is a information/clarification for G900 and G700: After you have flashed the units in Emma Service Client you should remove the battery and then re-insert the battery again before you restart the unit. If you don't do this it could happend that the unit dosn't start up. This effects RTL and MR1 sw on all kits. A solution is planned for the MR2 sw. This is NOT effecting P1 or W960.

02-13-2012, 08:49	#19 (permalink)
bincythomas Freak Poster Join Date: Mar 2010 Posts: 113 Member: 1268620 Status: Offline Sonork: bincy Thanks Meter: 6	Dear sir; Need Arabic soft for M1i (I have setool but i don't found where is Arabic version) please you help me.

08-08-2016, 20:00	#20 (permalink)
kang85 Junior Member Join Date: Jul 2016 Posts: 25 Member: 2604200 Status: Offline Thanks Meter: 3	SI-G900/G700 restart after flashing Information This is a information/clarification for G900 and G700: After you have flashed the units in Emma Service Client you should remove the battery and then re-insert the battery again before you restart the unit. If you don't do this it could happend that the unit dosn't start up. This effects RTL and MR1 sw on all kits. A solution is planned for the MR2 sw. This is NOT effecting P1 or W960.

04-29-2017, 10:00	#21 (permalink)
Bajwa786 Freak Poster Join Date: Oct 2015 Location: Pakistan Age: 36 Posts: 132 Member: 2477331 Status: Offline Sonork: 100.1676088 Thanks Meter: 29	Need sony so-04e firmware??? Firmware details: FS Id: DCM-LTE FS version: 10.3.1.B.2.42 S1_ROOT: S1_Root_5ca3,S1_Root_Test_b316 please send me this file!!!