Problems with unlocking my t610

[Beccara]

Good Monring All,

I'm having no end of touble tring to get my t610 to work correctly after flashing.

My first issue was the dreaded "Insert Correct Sim Card" Error after following this guide
http://www.cellular-support.com/nuke...tutorial&pid=2

Using the files

T610_Modem_Standard_R3C002.arm
T610_EMEA3_R3C002_c.sbn
T610_Original_GDFS_area.gdf

I followed it step by step the guide and when it didnt work i tried doing a "Rebuild SP area using OPT IMEI" I still got the same error.
When i looked into the phone i saw that the menu
>*<<*<*
Showed the imei number being 12345600-999999-0-13
Which is totally different from my IMEI number, so i tried the "Change IMEI " Button and went back into the menu, now it reported me IMEI correctly, However i still had the same message, so i tried the "Rebuild SP Area from OPT IMEI" Again.
This lead to the same error message and the imei being reported as 12345600-999999-0-13
All the time the Simlock menu shoed 4 padlocks, using the codes pulled from the phone it would say "Not Allowed"

So i gave up on that firmware flash roms

I tried many others and the only set i could get to allow the phone to boot was

T610_FullFlash_v5_EMEA1_R1L013.sbn
T610_Modem_R1L013.arm
T610_Original_GDFS_area.gdf
Changed IMEI to correct one

Now i have a phone that boots and accepts my Vodafone New Zealand sim card, Vodafone over here use only 900mhz. I now get "No Network" Even after 3 Master Resets i still get this, i have done ALL of the above with
In the simlock menu i have 4 UNlocked padlocks with (5) next to them

Div 8.4 Final Patched
Div 8.4 Low Cpu
Div 3.1 Multiband OldSchool - DIV31_Laser_900-1800-1900.exe

This is driving me nuts, can anyone out there offer any advice?

If it helps any the flash thats giving me the no network error has the following

SW Information:
R1L013 prgCXC12-
5572_EMEA_1
R1l013 prgCXC12-
5562_TAE

LCD Sw Versions
Test: 782074
Current 200302240

Camera SW Versions
Test 782430
Current 200304224

Current MS
CDA102215/1 R26A

Customzation TAE
CDA102215/1 R26A

ITP Version: R1B012
prgCXC125560_TP


Simlock Menu Shows

Network (Open Padlock) 5
Network subset (Open Padlock) 5
Service provider (Open Padlock) 5
Corporate (Open Padlock) 5

Configuration Menu shows

IMEI 351240-00-
xxxxxx-0-05
HR FR EFR
SAT on
GSM900 GSM1800
GSM1900

[Beccara]

It seems like all i will have to do is use the unpatched firmware that gives me the "insert correct simcard" error and find some way to unlock the 4 closed padlocks