hardware problem on 1st gen iphone - GSM-Forum

blu3ang3l · 01-15-2009, 02:04

I have an iphone that doesn't show anything on the display. When I got it, it didn't even power the screen and it was blank, after a new firmware it powers the display and shows only white. I must mention that the display is working properly(tried it on another iphone) On the hardware side there is no problem that I can see.

I would greatly appreciate some advice on what to do next or maybe a schematic of the phone or a service manual

thanks in advance

SCORILLO · 01-15-2009, 08:25

try another com board and check conectors.

blu3ang3l · 01-15-2009, 23:01

did that and checked the connectors but still no dice, and I really need to fix it

p.s. I have another one that freezes from time to time(it doesn't have a pattern) and the only abnormal thing that it does is that when I try to reset it (home+power) it shut;s down, it doesn't restart. did a firmware upgrade and it's even worst than before

SCORILLO · 01-15-2009, 23:56

well, if u tested the display,and the com board , its left only the logic board...now you know whats wrong with your iphone.

blu3ang3l · 01-27-2009, 20:28

ok I now what's wrong with it but now how do I fix it

01-15-2009, 02:04	#1 (permalink)
blu3ang3l Junior Member Join Date: Mar 2007 Location: Bucharest, Romania Posts: 5 Member: 464130 Status: Offline Thanks Meter: 0	hardware problem on 1st gen iphone I have an iphone that doesn't show anything on the display. When I got it, it didn't even power the screen and it was blank, after a new firmware it powers the display and shows only white. I must mention that the display is working properly(tried it on another iphone) On the hardware side there is no problem that I can see. I would greatly appreciate some advice on what to do next or maybe a schematic of the phone or a service manual thanks in advance

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
hardware problem on NBOX	Badra	n-Box	3	02-10-2011 15:27
ipod 1st gen custom	phonezoneshop	iPhone 2 / iPhone 3G / iPhone 3GS	1	06-19-2009 22:24
Need help on Iphone 1st gen phone!	mpx2004	Hardware Repair by brands	1	02-05-2009 18:51
Hardware problem on S45	SubTen	Siemens Hardware Repair Area	0	03-28-2003 11:29
Hardware problem on 6, 8210:s	Leeloo	Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L )	1	06-04-2001 15:26

01-15-2009, 08:25	#2 (permalink)
SCORILLO Freak Poster Join Date: Nov 2005 Posts: 139 Member: 203029 Status: Offline Thanks Meter: 18	try another com board and check conectors.

01-15-2009, 23:01	#3 (permalink)
blu3ang3l Junior Member Join Date: Mar 2007 Location: Bucharest, Romania Posts: 5 Member: 464130 Status: Offline Thanks Meter: 0	did that and checked the connectors but still no dice, and I really need to fix it p.s. I have another one that freezes from time to time(it doesn't have a pattern) and the only abnormal thing that it does is that when I try to reset it (home+power) it shut;s down, it doesn't restart. did a firmware upgrade and it's even worst than before

01-15-2009, 23:56	#4 (permalink)
SCORILLO Freak Poster Join Date: Nov 2005 Posts: 139 Member: 203029 Status: Offline Thanks Meter: 18	well, if u tested the display,and the com board , its left only the logic board...now you know whats wrong with your iphone.

01-27-2009, 20:28	#5 (permalink)
blu3ang3l Junior Member Join Date: Mar 2007 Location: Bucharest, Romania Posts: 5 Member: 464130 Status: Offline Thanks Meter: 0	ok I now what's wrong with it but now how do I fix it