How to fix No IMEI, Repair Needed , Ziphone bricks, Dead phones
 

Some time u may encounter these of errors
message" Repair neeeded, cant make call or something like that"
- ziphone wont jailbreak, activate.
- ziphone wont erase and repair my baseband
- ziphone will "work" scrolling and saying that cant find stuff, invalid data calibration tree and stuff.
in 1.1.1:
- i coulnd use the *#307# cuz my baseband was dead and the interface was laggy.
- message" Repair needed, cant make call or something like that"

Here is what i did:
0) Put ur phone in recovery mode and run Ziphone and select the erase the baseband and BL options

1) download this file : http://rapid$hare.com/files/95112188/DFU.rar.html and extract it somewhere. <<--- replace the $ for S

2) download the 1.0.2 firmware http://appldnld.apple.com.edgesuite....8_Restore.ipsw
3) Launch itunes (i used the lastest version 7.6.1) and wait until it detects your phone. (and keep it open)

4) remember i told u to extract the DFU.rar somewhere? go to that folder and run the file DFU.bat, this will put ur phone in full DFU mode. (the iphone screen should be white by now)

5)Now in itunes, shift + click the restore button and select the 1.0.2 firmware. and wait.

6) Your phone should be in the 1.0.2 firmware by now, use the *#307# trick to get to the preferences screen -->General ---> about ---> scroll down and woalaAAAa u will see the 3.0X modem firmware
"if u dont see anyfirmware STOP, and cry"

7) Now put ur phone in recovery mode and use itunes up to restore to 1.1.1.

8) Jailbreak and activate 1.1.1 dont forget to *- Set Autolock to Never -*

9) Go to installer and add i.unlock.no as a source

10) Go to System -> install bsd subsystem *- Reboot ur phone -*

11) Go to unlocking tools -> and execute "The Virginator 1.3 script"

12) wait until the script finishes

13) put the phone in recovery mode again

14) restore to 1.1.1

Work of Sizrx ...Thankx to HIm

why u need to restore to 1.1.1 anyway
all u need to do as long as phone can be in recovery mode is to restore to anyversion then do it all using Ziphone 3.0 &that's it
if u facing sm problems u can put phone In DFU mode but this needed for downgrade

wen this stuff was tested only version i have was 1.1.1...thats why...
ps i do know about DFU mode downgrading state

Can u help pls My iphone dead when on show many word i donot how to fix... it... how to fix it

dis is the picture show error

u help for error below:
- ziphone will "work" scrolling and saying that cant find stuff, invalid data calibration tree and stuff.

and then u say:

0) Put ur phone in recovery mode and run Ziphone and select the erase the baseband and BL options

man ziphone can't erase and it says: , invalid data calibration tree and stuff.