GSM-Forum

GSM-Forum (https://forum.gsmhosting.com/vbb/)
-   iPhone 2 / iPhone 3G / iPhone 3GS (https://forum.gsmhosting.com/vbb/f852/)
-   -   Iphone 3G / no wifi / no Imei / no ICCID / no modem firmware (https://forum.gsmhosting.com/vbb/f852/iphone-3g-no-wifi-no-imei-no-iccid-no-modem-firmware-1224925/)

Ipko 03-11-2011 14:15

Iphone 3G / no wifi / no Imei / no ICCID / no modem firmware
 
Hello , this problem getting to me after trying 4.0.1 to downgrade on 3.1.3 ,
Then i have back to 4..0.1 but problem are the same.
againg back to 3.1.3 same again!

What is the problem who have any solution , what i need to do with this iPhone to get back againg on normal mode??????????????????????????????????

Underdog 03-11-2011 14:18

Try this thread from yesterday: Yesterdays Thread;)

Ipko 03-11-2011 14:41

Quote:

Originally Posted by Underdog (Post 7062152)
Try this thread from yesterday: Yesterdays Thread;)

and problem are not same !?!?
My iPhone not show me wifi , BT , imei , iccid , modem firmware?

also i have try to search before posting on forum but maybe i dont know how , but i have find nothing!

thank you

Ipko 03-11-2011 15:28

is it sowftare problem , or hardware problem!
and for what face this problem?

sprouts1 03-23-2011 17:01

Iphone 3G / no wifi / no Imei / no ICCID / no modem firmware
 
Iphone 3G / no wifi / no Imei / no ICCID / no modem firmware

I have exactly the same :(

Long story and learning/trying really hard :D but at the mo very :(

Lad updated my 3g to 4.1 big mistake with 5.14.2

So tried the
How to Downgrade iOS 4.1 (Baseband 05.14.2) to iOS 4.0 (Baseband 05.13.4) Using Fuzzyband

All went seemingly OK as I had 5.08 bootloader.

On reboot my jailbreak seemed still there but phone would give message after about 1 or two minutes of running of
"restore needed, restore from itunes"
It would then reboot and stays in this loop :mad:

If I go into the settings ABOUT it is there that the info for / no wifi / no Imei / no ICCID / no modem firmware ALL BLANK????

Built new 4.2.1 maintaining baseband (sn0breez....) and loaded that.

All went fine but still stuck in a loop with no / no wifi / no Imei / no ICCID / no modem firmware Still all BLANK????

Please, please help

Is this fixable? Is it a case of ipad 6.xxx ???

Thanks

sprouts1 03-23-2011 23:43

Have broken loop with tinyumb...

Do not want to attempt any more without some advice, so if you can help with my mess described in the previous post it would be so greatly appreciated.
:rolleyes:

sprouts1 03-24-2011 17:43

No one ?

Really would appreciate a genius popping in :)

bpcentergtk 03-24-2011 17:52

Just disassemble the handset check the board properly and battery too.

sprouts1 03-24-2011 18:16

Quote:

Originally Posted by bpcentergtk (Post 7115956)
Just disassemble the handset check the board properly and battery too.

Thanks for taking the time to reply, however this phone was working 100% till I decided to go to 4.1. This worked but no unlock as bas band was upgraded!!

So used the fuzzy band as as my boot loader was 5.08 and then ended up with the issues described no wifi, no firmware etc

sprouts1 03-26-2011 00:00

Quote:

Originally Posted by bpcentergtk (Post 7115956)
Just disassemble the handset check the board properly and battery too.

All sorted now ;) luckily had the common sense to ignore this very poor advice :eek:

kittyangel16 03-26-2011 09:49

sulotion for no imie 3g or 3gs
 
run the red snow and update again the base band thats it:) i'd try so many time

kooolchief 03-26-2011 19:29

try using redsnow 9.6rc8
 
i had the same problem wid my friends 3g today, fixed it using redsnow and 4.2 orignal fw
tick on ipad baseband(this will upgrade ur basbeband 6.11 and ur imei,wifi and iccid back)
be sure dat u have da same 4.2 fw already installed on ur iphone before running redsnow
u can later unlock it using ultrasnow from cydia


Quote:

Originally Posted by Ipko (Post 7062133)
Hello , this problem getting to me after trying 4.0.1 to downgrade on 3.1.3 ,
Then i have back to 4..0.1 but problem are the same.
againg back to 3.1.3 same again!

What is the problem who have any solution , what i need to do with this iPhone to get back againg on normal mode??????????????????????????????????


Unlock_Master 03-27-2011 13:41

Iphone blank imei fix
 
Download the correct orinigal firmware and the custom firmware for your iphone such as 4.1 or 4.2.1 etc

1. Open redsnow input the correct oringal firmware click next
2. Put the device in "just enter pwned mode dfu mode"
3. Once the device is in dfu mode open itunes
4. Auto itunes will detect the iphone in dfu mode
5. Right click on restore and chose the correct custom firmware not orinigal firmware
6. Once completed activiated the iphone if you can if not move on to the next step.
7. Now we got the iphone working on the correct custom firmware open redsnow again.
8. Chose the orignial firmware whitch is matching with iphone.
9. Click on install cydia and ipad baseband click next.
10. Once finished you shall see your iphone rebooting and imei everything is restored back to original.

If step 9 dont work just install ipad baseband you may already have cydia install when flashed with custom firmware.

:d

mrkhanz

EJAZGUL 04-08-2011 09:27

anybody tested this solution
is it work pls tel me

thanks

UnlockingPoint 05-01-2011 13:26

Quote:

Originally Posted by mrkhanz (Post 7126410)
Download the correct orinigal firmware and the custom firmware for your iphone such as 4.1 or 4.2.1 etc

1. Open redsnow input the correct oringal firmware click next
2. Put the device in "just enter pwned mode dfu mode"
3. Once the device is in dfu mode open itunes
4. Auto itunes will detect the iphone in dfu mode
5. Right click on restore and chose the correct custom firmware not orinigal firmware
6. Once completed activiated the iphone if you can if not move on to the next step.
7. Now we got the iphone working on the correct custom firmware open redsnow again.
8. Chose the orignial firmware whitch is matching with iphone.
9. Click on install cydia and ipad baseband click next.
10. Once finished you shall see your iphone rebooting and imei everything is restored back to original.

If step 9 dont work just install ipad baseband you may already have cydia install when flashed with custom firmware.

:d

mrkhanz

doesnt work at all :rolleyes:


All times are GMT +1. The time now is 23:56.


vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2024 DragonByte Technologies Ltd.
- GSM Hosting Ltd. - 1999-2023 -

Page generated in 0.19682 seconds with 6 queries

SEO by vBSEO