GSM-Forum

GSM-Forum (https://forum.gsmhosting.com/vbb/)
-   BST / BSTPro Dongle (https://forum.gsmhosting.com/vbb/f891/)
-   -   -=★★★ Post All Successfully *Flashed * Unlocked * Repaired Phones★★★ =- (https://forum.gsmhosting.com/vbb/f891/post-all-successfully-flashed-unlocked-repaired-phones-2879204/)

-=MR_Gsm=- 08-01-2020 21:09

-=★★★ Post All Successfully *Flashed * Unlocked * Repaired Phones★★★ =-
 
-=Post All Successfully *Flashed * Unlocked * Repaired Phones=-



.BST_ Team.


BR,
-=MR_Gsm=-

shahid1982 09-05-2020 08:05

flash samsung G900S DONE

Fw.Ver :BSTPRO 4.03
Serial :BST-AMA9-3E3A-S5EB2
PL2303 : Not Detected
Login to server ... Login OK
-----------------------------------------------------
Download: Press Vol Dn + Home + Power

UART Cable Resistor: 523 K
ReadCodes/Unlock/Repair:
1. Type *#0808# and set USB to AP.
2. Set "USB Settings" to "DM+MODEM+ADB".
3. Click "OK".
Cables: MicroUSB
Interface: Auto, Change UART when request

Read Info/Flashing/UserLock/Backup:
Cables: MicroUSB
Interface: Auto


Load One Package "C:\Users\ayaz\Downloads\SM-G900S_1_20160721141341_0ugs7i9goy\G900SKSU1CPG1_G9 00SSKC1CPG1_G900SKSU1CPG1_HOME.tar.md5" ok

Restarting ADB service ... ok

Scanning devices ... 1 found
dev[1]
Manufactory:SAMSUNG
Model:
Hardware:
Mode:DOWNLOAD
-------------------------------------
Selection:Samsung SM-G900S
Operation:Flashing

Connect to device ...
Device pit saved toD:\BSTPRO\backup\samsung\pit\SM-G900S\SM-G900S_2020-09-05_11.55.59.pit
Write file aboot.mbn ...
Write file sbl1.mbn ...
Write file rpm.mbn ...
Write file tz.mbn ...
Write file sdi.mbn ...
Write file non-hlos.bin ...
Write file boot.img ...
Write file recovery.img ...
Write file system.img.ext4 ...
Write file cache.img.ext4 ...
Write file hidden.img.ext4 ...
Write file modem.bin ...
Flash completed
Performed by BSTPRO V4.03, time used 2 min 59 s

ahmadge 09-09-2020 08:00

I9195 unlock without root
here logo
Scanning devices ... 1 found
dev[1]
Manufactory:SAMSUNG
Model:GT-I9195
Hardware:QCOM
Mode:normal
-----------------------------------------------------
Download: Press Vol Dn + Home + Power

UART Cable Resistor: 523 K
ReadCodes/Unlock/Repair:
1. Type *#0808# and set USB to AP.
2. Set "USB Settings" to "DM+MODEM+ADB".
3. Click "OK".
Cables: MicroUSB
Interface: Auto, Change UART when request

Read Info/Flashing/UserLock/Backup:
Cables: MicroUSB
Interface: Auto

-------------------------------------
Selection:Samsung GT-I9195
Operation:Unlock Network
Connect to device ...
Unlocking device ...done

Time used : 9.7 s

Performed by BSTPRO V4.03, time used 9.7 s
{Ahmadge}


All times are GMT +1. The time now is 05:59.


vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2024 DragonByte Technologies Ltd.
- GSM Hosting Ltd. - 1999-2023 -

Page generated in 0.07681 seconds with 7 queries

SEO by vBSEO