Samsung J600G Patch Problem - GSM-Forum

prajkumari · 03-14-2019, 08:41

Hello PS,

Samsung J600g Patch Done by Chimera but IMEI Status is NG

Code:

Chimera Mobile Phone Utility version: 20.49.1355 @ 2019-03-14



Patch certificate started
Gathering phone info...
Collecting information. Be patient! Do NOT disconnect the phone!
Model: SM-J600G
Sales Code: INS
Country Code: India
Timezone: Asia/Kolkata
Android Version: 8.0.0 [R16NW] [SDK 26]
Build Date: Fri Jul 13 14:58:37 KST 2018
PDA Version: J600GDXU2ARG7 [july 2018, rev7]
Phone Version: J600GDXU2ARG1 [july 2018, rev1]
CSC Version: J600GODM2ARG7 [july 2018, rev7]
Product Code: INS
HIDSw Version: J600GDXU2ARG7/J600GODM2ARG7/J600GDXU2ARG1/J600GDXU2ARG7
Board Platform: EXYNOS5
Modem Platform: SHANNON315
Serial Number: RZ8K704QMKE
Imei: 35xxxxxxxxxxxxx
Unique Number: CBJ00995DEE2165
Connections: AT,MTP
Battery Status: 4.14V (83%)
Network Type: GSM
SIM Status: ABSENT,ABSENT
Multisim Config: DSDS
Knox Version: v30
Warranty Bit: 0
Security Patch: 2018-07-01
Data Encryption State: unencrypted
Preparing...
Checking current patchcert.
Checking modem.
Checking root.
Checking boot image. Be patient! Do NOT disconnect the phone!
The knox is still valid. Because of the boot patch the warranty will void.
Writing boot image.
Restarting phone.
Waiting for ADB connection. Be patient! Do NOT disconnect the phone!
Reading data...
Checking modem version.
Reading data. Be patient! Do NOT disconnect the phone!
Patching certificate...
Communicating with the server. Be patient! Do NOT disconnect the phone!
Within 20-70 seconds after the phone starts, the signal strength indicator will toggle: signal -> no signal -> signal.
You can check the status of the imei using: *#0011#
The patchcert can be removed by repeating the process.
If a new firmware is used, the patchcert process must be repeated.
Succeeded.
Successfully finished.
Finished at local time: [03.14.19 13:05:58]
WorkID: 54709376

**Chimera Tool** · 03-14-2019, 11:16

Hi,

please re.flash your device, after it start again imei repair and patch cert process.

Best regards
Nicole

Quote:

Originally Posted by prajkumari

Hello PS,

Samsung J600g Patch Done by Chimera but IMEI Status is NG

Code:

Chimera Mobile Phone Utility version: 20.49.1355 @ 2019-03-14



Patch certificate started
Gathering phone info...
Collecting information. Be patient! Do NOT disconnect the phone!
Model: SM-J600G
Sales Code: INS
Country Code: India
Timezone: Asia/Kolkata
Android Version: 8.0.0 [R16NW] [SDK 26]
Build Date: Fri Jul 13 14:58:37 KST 2018
PDA Version: J600GDXU2ARG7 [july 2018, rev7]
Phone Version: J600GDXU2ARG1 [july 2018, rev1]
CSC Version: J600GODM2ARG7 [july 2018, rev7]
Product Code: INS
HIDSw Version: J600GDXU2ARG7/J600GODM2ARG7/J600GDXU2ARG1/J600GDXU2ARG7
Board Platform: EXYNOS5
Modem Platform: SHANNON315
Serial Number: RZ8K704QMKE
Imei: 35xxxxxxxxxxxxx
Unique Number: CBJ00995DEE2165
Connections: AT,MTP
Battery Status: 4.14V (83%)
Network Type: GSM
SIM Status: ABSENT,ABSENT
Multisim Config: DSDS
Knox Version: v30
Warranty Bit: 0
Security Patch: 2018-07-01
Data Encryption State: unencrypted
Preparing...
Checking current patchcert.
Checking modem.
Checking root.
Checking boot image. Be patient! Do NOT disconnect the phone!
The knox is still valid. Because of the boot patch the warranty will void.
Writing boot image.
Restarting phone.
Waiting for ADB connection. Be patient! Do NOT disconnect the phone!
Reading data...
Checking modem version.
Reading data. Be patient! Do NOT disconnect the phone!
Patching certificate...
Communicating with the server. Be patient! Do NOT disconnect the phone!
Within 20-70 seconds after the phone starts, the signal strength indicator will toggle: signal -> no signal -> signal.
You can check the status of the imei using: *#0011#
The patchcert can be removed by repeating the process.
If a new firmware is used, the patchcert process must be repeated.
Succeeded.
Successfully finished.
Finished at local time: [03.14.19 13:05:58]
WorkID: 54709376

COMPUC3LL77 · 03-14-2019, 16:15

I Think that J400M/F , J600M Cellphones are in BETA MODE, because i dont see a sucesfull operation with these models using Chimera. I think that you should remove this information with this model until you get a final/sucesfull solution, cuz you are literally playing with our feelings ( lol ).

**Chimera Tool** · 03-14-2019, 17:11

Hi,

we have lot of successfully process on the same devices so it is total not beta.
The process successfully done in this case too, NG status comes from total difference cases.

In a 99% of the cases NG status comes from the wrong sequence of the processes or the lot of started process on the device.
In this case after the re-flash user will get a "clear" device and start again the processes. The correct sequence in each case the Repair imei OR Write cert process and the Patch cert will be the last step.
You can see from lot of post the correct sequence and the repeat of the processes are solved the NG status problem.

Best regards
Nicole

Quote:

Originally Posted by COMPUC3LL77

I Think that J400M/F , J600M Cellphones are in BETA MODE, because i dont see a sucesfull operation with these models using Chimera. I think that you should remove this information with this model until you get a final/sucesfull solution, cuz you are literally playing with our feelings ( lol ).

COMPUC3LL77 · 03-14-2019, 17:30

Quote:

Originally Posted by Chimera Tool

Hi,

we have lot of successfully process on the same devices so it is total not beta.
The process successfully done in this case too, NG status comes from total difference cases.

In a 99% of the cases NG status comes from the wrong sequence of the processes or the lot of started process on the device.
In this case after the re-flash user will get a "clear" device and start again the processes. The correct sequence in each case the Repair imei OR Write cert process and the Patch cert will be the last step.
You can see from lot of post the correct sequence and the repeat of the processes are solved the NG status problem.

Best regards
Nicole

There should be some tutorials of your own, showing us the whole process.
Can you share with me, the link of theses sucesfull processes with these devices? Havent seem a clear one.

masterk0rn05 · 03-14-2019, 21:06

How did you make the j600g model root?

alexnow24 · 03-14-2019, 21:52

this is just a beta I have tested j400f j400m and j600m all the same result ng there is no signal, I have tried different firmware and the result is the same ng so the chimera team should say what firmware should be used for the effective repair and not have to waste so much time ......
http://forum.gsmhosting.com/vbb/f898...j4-j6-2567430/

alexnow24 · 03-14-2019, 21:56

for now for some models we only buy smoke

metalgold23 · 03-14-2019, 23:17

yes
no any success report for this models
i guess chimera team working for this problem and also working for other new exinos models patch cert
like a530f a10 m10 and etc
i'm right chimera team?

chavonbravo · 03-15-2019, 01:19

Try a permissive boot.img, example, from combinatiin, or find way to make it permissive. The issue is with new selinux style. With a selinux pernissive boot.img, selinux issues are ignored. There are some models which have differences, so some workarounds may be necessary for now.

COMPUC3LL77 · 03-15-2019, 16:10

Yeah... We only buy smoke.

Hope Chimera will bring a good solution (My Hope on You Guys)

sany5491 · 03-16-2019, 18:04

Quote:

Originally Posted by Chimera Tool

Hi,

we have lot of successfully process on the same devices so it is total not beta.
The process successfully done in this case too, NG status comes from total difference cases.

In a 99% of the cases NG status comes from the wrong sequence of the processes or the lot of started process on the device.
In this case after the re-flash user will get a "clear" device and start again the processes. The correct sequence in each case the Repair imei OR Write cert process and the Patch cert will be the last step.
You can see from lot of post the correct sequence and the repeat of the processes are solved the NG status problem.

Best regards
Nicole

I cannot see anyone on this model success....

**Chimera Tool** · 03-18-2019, 14:14

Hi,

Naturally here you can find lot of post about unsuccessful processes and other problems, our users are writing here because they faced with some issue.
We can not post here screenshot about the processes because of the GDPR, but you can be sure when the processes result rate low or we find problem with it, the process will be removed immediately. By that case we have 80% successful result rate.
Just read our previously posts, many times when we find problem with one process our team removed it without any problem and we added it again when we were 100% sure the problem solved and the process working correctly.

Best regards
Nicole

Quote:

Originally Posted by sany5491

I cannot see anyone on this model success....

awamibhai · 10-28-2019, 09:53

i repair my j600g and successfully patch but after restart my phone the imei status is NG and phone is showing emergency call only
if anyone have solution soo please share

Thanks alot.

**Chimera Tool** · 10-28-2019, 11:15

Hi,

please send us the work id of the patch cert process and we can check your case.
Thank you in advance!

Best regards
Nicole

Quote:

Originally Posted by awamibhai

i repair my j600g and successfully patch but after restart my phone the imei status is NG and phone is showing emergency call only
if anyone have solution soo please share

Thanks alot.

03-14-2019, 16:15	#3 (permalink)
COMPUC3LL77 Freak Poster Join Date: Apr 2015 Location: Somewhere I Belong Age: 35 Posts: 294 Member: 2377851 Status: Offline Thanks Meter: 35	I Think that J400M/F , J600M Cellphones are in BETA MODE, because i dont see a sucesfull operation with these models using Chimera. I think that you should remove this information with this model until you get a final/sucesfull solution, cuz you are literally playing with our feelings ( lol ).

03-14-2019, 21:06	#6 (permalink)
masterk0rn05 Major Poster Join Date: Apr 2016 Location: Venezuela Posts: 44 Member: 2554276 Status: Offline Thanks Meter: 3	How did you make the j600g model root?

03-14-2019, 21:52	#7 (permalink)
alexnow24 Freak Poster Join Date: Mar 2008 Location: colombia Posts: 223 Member: 738323 Status: Offline Sonork: 1618038 Thanks Meter: 69	this is just a beta I have tested j400f j400m and j600m all the same result ng there is no signal, I have tried different firmware and the result is the same ng so the chimera team should say what firmware should be used for the effective repair and not have to waste so much time ...... http://forum.gsmhosting.com/vbb/f898...j4-j6-2567430/

03-14-2019, 21:56	#8 (permalink)
alexnow24 Freak Poster Join Date: Mar 2008 Location: colombia Posts: 223 Member: 738323 Status: Offline Sonork: 1618038 Thanks Meter: 69	for now for some models we only buy smoke

03-14-2019, 23:17	#9 (permalink)
metalgold23 No Life Poster Join Date: Feb 2015 Location: IRAN-TABRIIZ Posts: 928 Member: 2339474 Status: Offline Sonork: 100.1662352 Thanks Meter: 332	yes no any success report for this models i guess chimera team working for this problem and also working for other new exinos models patch cert like a530f a10 m10 and etc i'm right chimera team?

03-15-2019, 01:19	#10 (permalink)
chavonbravo Freak Poster Join Date: Jan 2009 Posts: 256 Member: 952912 Status: Offline Thanks Meter: 142	Try a permissive boot.img, example, from combinatiin, or find way to make it permissive. The issue is with new selinux style. With a selinux pernissive boot.img, selinux issues are ignored. There are some models which have differences, so some workarounds may be necessary for now.

03-15-2019, 16:10	#11 (permalink)
COMPUC3LL77 Freak Poster Join Date: Apr 2015 Location: Somewhere I Belong Age: 35 Posts: 294 Member: 2377851 Status: Offline Thanks Meter: 35	Yeah... We only buy smoke. Hope Chimera will bring a good solution (My Hope on You Guys)

10-28-2019, 09:53	#14 (permalink)
awamibhai Junior Member Join Date: Dec 2013 Posts: 15 Member: 2083965 Status: Offline Thanks Meter: 8	i repair my j600g and successfully patch but after restart my phone the imei status is NG and phone is showing emergency call only if anyone have solution soo please share Thanks alot.