GPGEMMC Box Successfully Unlocked / Repaired / Flashed Phones !!! - GSM-Forum

**GPGIndustries** · 11-29-2013, 09:07

c_ahmad79 · 12-11-2013, 14:32

Glaxy S3 i9300 hang on logo , no product code , cant flash with any tool fixed with GPGeMMC

more to come

Regards

WBGSM · 12-25-2013, 08:30

Samsung GT 7100 Pattren Remove with GPGeMMC

Br

WBGSM

GPGEMMC_BOX truly one EMMC programmer

WBGSM · 12-26-2013, 09:59

In this Video show that how u can take Full dump file from Samsung GT-N7000 with GPGeMMC

Br

WBGSM

GPGEMMC_BOX truly one EMMC programmer

WBGSM · 12-26-2013, 10:10

Video Upload in DailyMotion

Samsung GT-N7000 Full Dump File Done with GPGeMMC - Video Dailymotion

Br

WBGSM

GPGEMMC_BOX truly one EMMC programmer

WBGSM · 12-28-2013, 09:44

Samsung I9100 Pattren Remove without data lost with GPGeMMC

DailyMotion link

Remove Pattren Lock in Samaung 9100 without data lost - Video Dailymotion

Br

WBGSM

GPGEMMC_BOX truly one EMMC programmer

xDiRECT · 12-28-2013, 17:19

emmc KLM4G1FE3A-A001 success read & write with GPGEmmc:

Read info:

write firmware to emmc:

Regards

Qaisar Mahmood · 01-01-2014, 10:25

Samsung GT-S5830 unknown baseband Not Solved with any tool
only Solved with GPGeMMC

Method.

1- Open GPGemmc tool
2- Sold Wire on Board
3- insert battery
4- insert Usb Cable (Recived With Box)
5- Click Detect Pin & Hold power button
6- When Pin out Detect Click Set pinouts
7- Select Dump File
8- And Click Write Button

Here is Dump File

GPGjtag_Samsung S5830_MIBIB-QCSBL-OEMSBL-EFS2-APP-UPCH_Sniper_04 - Download - 4shared - Mhannie Jay-Ar Monterey

BR
Qaisar Mahmood
GPGEMMC_BOX truly one EMMC programmer

Qaisar Mahmood · 01-01-2014, 12:25

Method.

1- Open GPGemmc tool
2- Sold Wire on Board
3- insert battery
4- insert Usb Cable (Recived With Box)
5- Click Detect Pin & Hold power button
6- When Pin out Detect Click Set pinouts
7- Select Dump File
8- And Click Write Button

Here is Dump File

GPGjtag_Samsung S5830_MIBIB-QCSBL-OEMSBL-EFS2-APP-UPCH_Sniper_04 - Download - 4shared - Mhannie Jay-Ar Monterey

BR
Qaisar Mahmood
GPGEMMC_BOX truly one EMMC programmer

faizanbhatti94 · 01-02-2014, 08:39

After Writing Boot1 file Phone Alive 100%

Writing...
Device Ready...
Device Ready...OK!
ID check...
Level (V) : VCC V18 VCCQ D0 CMD CLK
Pullup : 0.31 0.02 0.02 0.35 0.00 0.00
Power ON : 2.63 1.76 2.52 1.01 1.70 0.00

eMMC ORC: C0FF8080
eMMC CID: 15010056545530304DF74C116B3621
eMMC CSD: D02701320F5903FFF6DBFFFF8E4040
ID check: 00010015
Product name: VTU00M
User partition size: 3AB400000 ( 15028M / 14.675G), 15758000128 Bytes
Boot partition size: 0x200000 ( 2.0M )
RPMB partition size: 0x20000 ( 0.1M )
ID check...OK!
Erase chip...
Erase chip: 0.38 sec.
Blank check chip...
Blank check chip: 0.76 sec.
Write chip...
Write chip: 2.17 sec.
Verify chip...
Verify chip: 0.78 sec.
Write chip success. time:4.11 sec.

Sorry For Snap Short after Successful Result i ext program Next Time i post .

br

Faizan

LuisinhoCell · 01-02-2014, 18:41

S6102

Quote:

------------------------------------------------------
Please press Power On key before any Read/Write/Erase operation.
Detecting, please press power on/off button...
Device Ready...OK!
Detection initiated...
Detecting TCK,TDO,TDI,and TMS...
Detecting TRST and SYSRST...
TRST = 3
TDO = 5
TCK = 9
TMS = 11
TDI = 13
SYSRST = 15
CPUID = 7F61B307
Please click [Set PinOuts] button before read or write.
Time: 8.50 s

Device Ready...OK!
Erase operation(Make sure to press Power on key)...
CPU ID: 7F61B307.
Flash ID: 00EC0050 (512M).
Release Power on key now and operation continues...
Erase succeed!
Time: 2 s

Please choose Flash file to be writen!
Please choose Flash file to be writen!
Read operation(Make sure to press Power on key)...
CPU ID: 7F61B307.
Flash ID: 00EC0050 (512M).
Release Power on key now and operation continues...
File saved inC:\Documents and Settings\LuisinhoCell\Meus documentos\456.bin
Read succeed!
Time: 12 s

Writing in progress(make sure to press Power On key)...
CPU ID: 7F61B307.
Flash ID: 00EC0050 (512M).
Release Power on key now and operation continues...
Write succeed!
>>Time: 11 s

LuisinhoCell · 01-03-2014, 13:15

Write Imei SIII

Quote:

Waiting to enter unlock IMEI Change Repair mode¡*
Enter unlock IMEI Change Repair mode successful.
Phone Name:GT-I9300
Phone version:I9300XXUFME3
Serial number:RF1C6755XD
Old IMEI:35478952012369
New IMEI:354789520123698
Exiting unlock IMEI Change Repair mode¡*
>>Run Unlock IMEI Change Repair successful!

LuisinhoCell · 01-03-2014, 13:25

Phone : Xperia U20

Code:

Unlock procedure started, waiting for phone.
Power off phone, keep BACK button and insert usb cable.
Keep holding back key untill next prompt.
Connecting to the server
Please wait....
Send S1 Loader
Loader is sent, please wait...
Read device info.
CXC		  : 1229-3641
IMEI		  : 01234300200217
EROM AID               : 0001
LOADER AID           : 0001
AID TAMP STATE  : NOT_TAMPERED
SE X8 GROUP
 - HOLD THE BACK KEY
IMEI : 01234300200217
- SE UNLOCK STARTED.
- WAITING USER ACTION
- WAITING PHONE
Version : 2.1-update1 OK.
Start comunication with phone...
- WAITING PHONE
- PHONE FOUND
Changes appilied
Check changes, wait..
Wait untill phone full power on.
- STATUS: - UNLOCKED!!
Wait untill phone full power on.
-------------------------- 
Log saved to:
logs\01234300200217_XperiaX10MiniProU20_1.txt

Br
LuisinhoCell

Enjoy GPGeMMC

faizanbhatti94 · 01-07-2014, 07:30

After Write Boot1, Boot2 and Ext_CSD Mobile Alive .

br

Faizan Aslam Bhatti

LuisinhoCell · 01-07-2014, 21:16

HTC HD 2

Detect Pinout

Code:

  Detecting, please press power on/off button...
   Device Ready...OK!
  Detection initiated...
  Detecting TCK,TDO,TDI,and TMS... 
  Detecting TRST and SYSRST...
  TDO    =  5
  TCK    =  9
  TMS    = 11
  TDI    = 13
  SYSRST = 15
  CPUID  = E1002420
  Please click [Set PinOuts] button before read or write.
>>Time: 7.47 s

11-29-2013, 09:07	#1 (permalink)
GPGIndustries Product Manager Join Date: Jul 2003 Location: France,China,Dubai,Indonesia Age: 48 Posts: 3,700 Member: 34016 Status: Offline Sonork: 100.67372 Thanks Meter: 24,594	GPGEMMC Box Successfully Unlocked / Repaired / Flashed Phones !!! Last edited by GPGIndustries; 01-04-2014 at 11:42.

12-25-2013, 08:30	#3 (permalink)
WBGSM No Life Poster Join Date: May 2012 Location: In Your Heart Age: 37 Posts: 776 Member: 1759636 Status: Offline Sonork: 100.1591515 Thanks Meter: 785	GPGEMMC Box Successfully Unlocked / Repaired / Flashed Phones !!! Samsung GT 7100 Pattren Remove with GPGeMMC Br WBGSM GPGEMMC_BOX truly one EMMC programmer

12-26-2013, 09:59	#4 (permalink)
WBGSM No Life Poster Join Date: May 2012 Location: In Your Heart Age: 37 Posts: 776 Member: 1759636 Status: Offline Sonork: 100.1591515 Thanks Meter: 785	GPGEMMC Box Successfully Unlocked / Repaired / Flashed Phones !!! In this Video show that how u can take Full dump file from Samsung GT-N7000 with GPGeMMC Br WBGSM GPGEMMC_BOX truly one EMMC programmer

12-28-2013, 09:44	#6 (permalink)
WBGSM No Life Poster Join Date: May 2012 Location: In Your Heart Age: 37 Posts: 776 Member: 1759636 Status: Offline Sonork: 100.1591515 Thanks Meter: 785	GPGEMMC Box Successfully Unlocked / Repaired / Flashed Phones !!! Samsung I9100 Pattren Remove without data lost with GPGeMMC DailyMotion link Remove Pattren Lock in Samaung 9100 without data lost - Video Dailymotion Br WBGSM GPGEMMC_BOX truly one EMMC programmer

12-28-2013, 17:19	#7 (permalink)
xDiRECT Cheater -Don't Deal with him- Join Date: Jul 2012 Age: 42 Posts: 346 Member: 1791133 Status: Offline Thanks Meter: 89	GPGEMMC Box Successfully Unlocked / Repaired / Flashed Phones !!! emmc KLM4G1FE3A-A001 success read & write with GPGEmmc: Read info: write firmware to emmc: Regards

12-11-2013, 14:32	#2 (permalink)
c_ahmad79 No Life Poster Join Date: Jan 2006 Location: inside emmc ufs Age: 20 Posts: 7,191 Member: 221603 Status: Offline Sonork: 100.1581270 Thanks Meter: 6,397	Glaxy S3 i9300 hang on logo , no product code , cant flash with any tool fixed with GPGeMMC more to come Regards

12-26-2013, 10:10	#5 (permalink)
WBGSM No Life Poster Join Date: May 2012 Location: In Your Heart Age: 37 Posts: 776 Member: 1759636 Status: Offline Sonork: 100.1591515 Thanks Meter: 785	Video Upload in DailyMotion Samsung GT-N7000 Full Dump File Done with GPGeMMC - Video Dailymotion Br WBGSM GPGEMMC_BOX truly one EMMC programmer

01-01-2014, 10:25	#8 (permalink)
Qaisar Mahmood No Life Poster Join Date: Jan 2006 Location: Pakistan Posts: 15,094 Member: 226457 Status: Offline Sonork: No more used Thanks Meter: 14,932	GPGEMMC Box Successfully Unlocked / Repaired / Flashed Phones !!! Samsung GT-S5830 unknown baseband Not Solved with any tool only Solved with GPGeMMC Method. 1- Open GPGemmc tool 2- Sold Wire on Board 3- insert battery 4- insert Usb Cable (Recived With Box) 5- Click Detect Pin & Hold power button 6- When Pin out Detect Click Set pinouts 7- Select Dump File 8- And Click Write Button Here is Dump File GPGjtag_Samsung S5830_MIBIB-QCSBL-OEMSBL-EFS2-APP-UPCH_Sniper_04 - Download - 4shared - Mhannie Jay-Ar Monterey BR Qaisar Mahmood GPGEMMC_BOX truly one EMMC programmer

01-01-2014, 12:25	#9 (permalink)
Qaisar Mahmood No Life Poster Join Date: Jan 2006 Location: Pakistan Posts: 15,094 Member: 226457 Status: Offline Sonork: No more used Thanks Meter: 14,932	Samsung GT-S5830 unknown baseband Not Solved with any tool only Solved with GPGeMMC Method. 1- Open GPGemmc tool 2- Sold Wire on Board 3- insert battery 4- insert Usb Cable (Recived With Box) 5- Click Detect Pin & Hold power button 6- When Pin out Detect Click Set pinouts 7- Select Dump File 8- And Click Write Button Here is Dump File GPGjtag_Samsung S5830_MIBIB-QCSBL-OEMSBL-EFS2-APP-UPCH_Sniper_04 - Download - 4shared - Mhannie Jay-Ar Monterey BR Qaisar Mahmood GPGEMMC_BOX truly one EMMC programmer

01-02-2014, 08:39	#10 (permalink)
faizanbhatti94 Cheater -Don't Deal with him- Join Date: Apr 2006 Age: 37 Posts: 699 Member: 265129 Status: Offline Thanks Meter: 281	Samsung Note II N7100 Dead Boot Repair After Writing Boot1 file Phone Alive 100% Writing... Device Ready... Device Ready...OK! ID check... Level (V) : VCC V18 VCCQ D0 CMD CLK Pullup : 0.31 0.02 0.02 0.35 0.00 0.00 Power ON : 2.63 1.76 2.52 1.01 1.70 0.00 eMMC ORC: C0FF8080 eMMC CID: 15010056545530304DF74C116B3621 eMMC CSD: D02701320F5903FFF6DBFFFF8E4040 ID check: 00010015 Product name: VTU00M User partition size: 3AB400000 ( 15028M / 14.675G), 15758000128 Bytes Boot partition size: 0x200000 ( 2.0M ) RPMB partition size: 0x20000 ( 0.1M ) ID check...OK! Erase chip... Erase chip: 0.38 sec. Blank check chip... Blank check chip: 0.76 sec. Write chip... Write chip: 2.17 sec. Verify chip... Verify chip: 0.78 sec. Write chip success. time:4.11 sec. Sorry For Snap Short after Successful Result i ext program Next Time i post . br Faizan

01-07-2014, 07:30	#14 (permalink)
faizanbhatti94 Cheater -Don't Deal with him- Join Date: Apr 2006 Age: 37 Posts: 699 Member: 265129 Status: Offline Thanks Meter: 281	Samsung I9100 Dead Boot Repair After Write Boot1, Boot2 and Ext_CSD Mobile Alive . br Faizan Aslam Bhatti

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode