GPGEMMC Box Successfully Unlocked / Repaired / Flashed Phones !!! - Page 3 - GSM-Forum

akashub · 01-24-2014, 15:09

Detecting

writing boot file

LuisinhoCell · 01-25-2014, 15:49

I9505 Imei Null 100% Repair By GPGeMMc

EFS Repair

Repair Imei

Code:

    Waiting to enter unlock IMEI Repair mode...
  Enter unlock IMEI Repair mode successful.
  Phone Name:GT-I9505
  Phone version:I9505VJUEMKE
  Serial number:0000000000
  Old IMEI:00000000000000
  New IMEI:354789520148569
  Exiting unlock IMEI Repair mode...
>>Run Unlock IMEI Repair successful!

Br
LuisinhoCell

atif ikram · 01-26-2014, 16:00

Other Box can't Write File... LOG from other box

Box Working Mode: JTAG Box.
Box Drivers version: 3.0.0.0, are OK
Z3X Card Serial : xxxx-xxxx , ver: 22
Writing file...G:\Jtag\easy jtag\N7100\EMMC_00000000_00200000.bin
Successefuly connected to box on COM46
Box S/N: ddddddddddddd, ,FW Ver.: 01.48
Loading eMMC Addon Firmware...
CMD Pullup Level:1381 mV
CMD Active Level:1753 mV
EMMC CID 15010056545530304D006C3B74AF9F63
EMMC CSD D02701320F5903FFF6DBFFFF8E40406D
EMMC Manufacturer ID: 15
EMMC OEM ID: 0100
EMMC Date: 09/2012 FW rev.0x0 HW rev.0x0
EMMC Serial #: 1815835823
EMMC NAME: VTU00M
EMMC Capacity: 15028 MB (High Density Card)
Writing 000000200000 bytes to 00000000 ...ROM2
Retry writing adress 0x00000000
Retry writing adress 0x00000000
Retry writing adress 0x00000000
Retry writing adress 0x00000000

Done with GPGeMMC

Read Info...
Device Ready...
Device Ready...OK!
ID check...
Level (envy) : VCC V18 VCCQ D0 CMD CLK
Pullup : 0.00 0.02 0.00 0.35 0.00 0.00
Power ON : 2.62 1.77 2.56 0.73 0.05 0.00
-------------------------------------------------------------------
eMMC ORC: 00000000,bad code!
ID check lost!
Read Info...
Device Ready...
Device Ready...OK!
ID check...
Level (envy) : VCC V18 VCCQ D0 CMD CLK
Pullup : 0.00 0.01 0.00 0.34 0.00 0.00
Power ON : 2.62 1.77 2.55 1.05 1.71 0.00
-------------------------------------------------------------------
eMMC ORC: C0FF8080
eMMC CID: 15010056545530304DF16C3B74AF9F
eMMC CSD: D02701320F5903FFF6DBFFFF8E4040
ID check: 00010015
Product name: VTU00M
User partition size: 3AB400000 ( 15028M / 14.675G), 15758000128 Bytes
Boot partition size: 0x200000 ( 2.0M )
RPMB partition size: 0x20000 ( 0.1M )
ID check...OK!
ID check success. time:0.76 sec.
Erasing...
Device Ready...
Device Ready...OK!
ID check...
Level (envy) : VCC V18 VCCQ D0 CMD CLK
Pullup : 0.00 0.02 0.00 0.34 0.00 0.00
Power ON : 2.62 1.77 2.56 1.04 1.71 0.00
-------------------------------------------------------------------
eMMC ORC: C0FF8080
eMMC CID: 15010056545530304DF16C3B74AF9F
eMMC CSD: D02701320F5903FFF6DBFFFF8E4040
ID check: 00010015
Product name: VTU00M
User partition size: 3AB400000 ( 15028M / 14.675G), 15758000128 Bytes
Boot partition size: 0x200000 ( 2.0M )
RPMB partition size: 0x20000 ( 0.1M )
ID check...OK!
Erase chip...Boot1
Erase chip: 0.62 sec.
Blank check chip...Boot1
Blank check chip: 0.75 sec.
Erase chip...Boot2
Erase chip: 0.64 sec.
Blank check chip...Boot2
Blank check chip: 0.75 sec.
Erase chip...User
Erase chip: 4.61 sec.
Blank check chip...User
Blank check chip: 603.11 sec.
Erase chip success. time:610.52 sec.
Writing...
Device Ready...
Device Ready...OK!
ID check...
Level (envy) : VCC V18 VCCQ D0 CMD CLK
Pullup : 0.00 0.01 0.00 0.34 0.00 0.00
Power ON : 2.62 1.77 2.56 1.02 1.71 0.01
-------------------------------------------------------------------
eMMC ORC: C0FF8080
eMMC CID: 15010056545530304DF16C3B74AF9F
eMMC CSD: D02701320F5903FFF6DBFFFF8E4040
ID check: 00010015
Product name: VTU00M
User partition size: 3AB400000 ( 15028M / 14.675G), 15758000128 Bytes
Boot partition size: 0x200000 ( 2.0M )
RPMB partition size: 0x20000 ( 0.1M )
ID check...OK!
Write chip...Boot1
Write chip: 1.55 sec.
>>Write chip success. time:1.55 sec.

akashub · 01-28-2014, 13:02

Wildfire detect write sucess

akashub · 01-29-2014, 08:46

World's 1st Karboon Titanium S5 Pinouts By Great GPG EMMC BOX

Note: this pinout is auto detect pinouts

Wbr
Akashub

sahilfency · 01-31-2014, 16:42

HTC sensation x315e DEADBOOT REPAIR
COMPLETE WITH GPG EMMC
SOME JTAG SHOW ......
ERROR: DCC Loader has reported Error Code = 0x35 (0x000000). Trying to recover..
BUT GPGEMMC SOLVED THIS PROBLEM EASY

HOW TO REPAIR ...
DOWNLOAD 4 MB FILE FROM GPGEMMC SUPPORT
MAKE JTAG JUMPER COMPLETE
DETECT PIN
SETPINOUT
SILECT FLESH FILE & PRESS WRITE ................

AFTER WRITE
U R PHONE COMPLETE ON & GOOD WORKING

akashub · 02-02-2014, 12:40

Sony u20i pattern lock removed

swechacnu · 02-02-2014, 12:42

N7100 Blank Product Name Successfully Repaired With GPG EMMC...

Really Great GPGeMMC 1.12 Support For Flashing!! Perfect Tool to Recover Phone from any STATE !!

I have tried so many tools N7100 Blank Product name but not success, with gpg emmc tool recovered successfully, no need to isp program just flash first 4 full flash files then write normal single flash file with efs repair it will alive phone,

Here is 4 full flash file log,

Code:

Start Detect device.
Device detected OK: COM62
Downloading..
Get PIT for mapping..
PIT Saved to: backup\samsung_pit\GT-N7100_samsung_pit_7.pit
Firmware update start..
  Loading: boot.img, wait.
  Processing: boot.img
  Loading: cache.img, wait.
  Processing: cache.img
  Loading: hidden.img, wait.
  Processing: hidden.img
  Loading: modem.bin, wait.
  Processing: modem.bin
Wrong repply( FF )
Total Time: 00:00:47
--------------------------

Here is Single flash file log,

Code:

tart Detect device.
Device detected OK: COM62
Downloading..
Get PIT for mapping..
PIT Saved to: backup\samsung_pit\GT-N7100_samsung_pit_8.pit
Firmware update start..
  Loading: boot.img, wait.
  Processing: boot.img
  Loading: recovery.img, wait.
  Processing: recovery.img
  Loading: system.img, wait.
  Processing: system.img
Total Time: 00:04:26
--------------------------

Here is screenshot for success mobile, before flash and after flash same blank but working fine...

BR,
Srinivas Reddy.

BEHBOODI · 02-03-2014, 11:12

Samsung I9300 Android 4.3 Successfully Flashed With GPGeMMC BOX.

BR,

BEHBOODI

WBGSM · 02-03-2014, 11:41

Galaxy Note1 N7000 Restart on Samsung Done with GPGeMMC

1) Connect All Points to the PCB

2) Then Read information for check is all points connected or not

3) write the boot files ( N7000.boot1 / N7000.boot2 / N7000.ext_csd )
if give some problem in writing then just leave tick mark on Erase butten and Erase

4) after erasing the chip write the boot files if again not write the files then Erase All chip

5) Then write the Boot Files it will Done 100%

6) After Flashing set will be in downloading mode then flash the set by Odin and Enjoy

Br

WBGSM

GPGEMMC_BOX truly one EMMC programmer

WBGSM · 02-03-2014, 13:31

Samsung S5360 Flash Done With GPGeMMC while faild other Software

Here is Successfull Story with GPGeMMC

Here is Video

S5360 Flash Done with GPGeMMC By WBGSM - Video Dailymotion

WBGSM · 02-03-2014, 13:58

Samsung Galaxy S2 Pattren remove by GPGeMMC Volum Keys print was damage therefore cant reset manulay
but GPGeMMC Done

Br

WBGSM

GPGEMMC_BOX truly one EMMC programmer

akashub · 02-03-2014, 14:51

Samsung Gt-I8552 pattern lock removed by selecting model i8258

WBGSM · 02-03-2014, 15:58

Samsung Galaxy I905P Pattren Remove by GPGeMMC

Br

WBGSM

GPGEMMC_BOX truly one EMMC programmer

WBGSM · 02-03-2014, 16:24

Samsung S6810 Fame Pattren Unlocked by selecting S5830

Br

WBGSM

GPGEMMC_BOX truly one EMMC programmer

01-24-2014, 15:09	#31 (permalink)
akashub No Life Poster Join Date: Apr 2008 Location: PROTECTED BY 308 Posts: 2,818 Member: 750001 Status: Offline Sonork: 100.1641021 Thanks Meter: 1,269	Samsung GT-S8530 boot repair Detecting writing boot file

01-25-2014, 15:49	#32 (permalink)
LuisinhoCell No Life Poster Join Date: Apr 2006 Location: Made In Brazil Age: 43 Posts: 3,030 Member: 264903 Status: Offline Sonork: 1584531 Thanks Meter: 3,356	I9505 Imei Null 100% Repair By GPGeMMc EFS Repair Repair Imei Code: Waiting to enter unlock IMEI Repair mode... Enter unlock IMEI Repair mode successful. Phone Name:GT-I9505 Phone version:I9505VJUEMKE Serial number:0000000000 Old IMEI:00000000000000 New IMEI:354789520148569 Exiting unlock IMEI Repair mode... >>Run Unlock IMEI Repair successful! Br LuisinhoCell

01-26-2014, 16:00	#33 (permalink)
atif ikram Freak Poster Join Date: Aug 2011 Posts: 255 Member: 1644460 Status: Offline Thanks Meter: 44	GPGEMMC Box Successfully Unlocked / Repaired / Flashed Phones !!! Other Box can't Write File... LOG from other box Box Working Mode: JTAG Box. Box Drivers version: 3.0.0.0, are OK Z3X Card Serial : xxxx-xxxx , ver: 22 Writing file...G:\Jtag\easy jtag\N7100\EMMC_00000000_00200000.bin Successefuly connected to box on COM46 Box S/N: ddddddddddddd, ,FW Ver.: 01.48 Loading eMMC Addon Firmware... CMD Pullup Level:1381 mV CMD Active Level:1753 mV EMMC CID 15010056545530304D006C3B74AF9F63 EMMC CSD D02701320F5903FFF6DBFFFF8E40406D EMMC Manufacturer ID: 15 EMMC OEM ID: 0100 EMMC Date: 09/2012 FW rev.0x0 HW rev.0x0 EMMC Serial #: 1815835823 EMMC NAME: VTU00M EMMC Capacity: 15028 MB (High Density Card) Writing 000000200000 bytes to 00000000 ...ROM2 Retry writing adress 0x00000000 Retry writing adress 0x00000000 Retry writing adress 0x00000000 Retry writing adress 0x00000000 Done with GPGeMMC Read Info... Device Ready... Device Ready...OK! ID check... Level (envy) : VCC V18 VCCQ D0 CMD CLK Pullup : 0.00 0.02 0.00 0.35 0.00 0.00 Power ON : 2.62 1.77 2.56 0.73 0.05 0.00 ------------------------------------------------------------------- eMMC ORC: 00000000,bad code! ID check lost! Read Info... Device Ready... Device Ready...OK! ID check... Level (envy) : VCC V18 VCCQ D0 CMD CLK Pullup : 0.00 0.01 0.00 0.34 0.00 0.00 Power ON : 2.62 1.77 2.55 1.05 1.71 0.00 ------------------------------------------------------------------- eMMC ORC: C0FF8080 eMMC CID: 15010056545530304DF16C3B74AF9F eMMC CSD: D02701320F5903FFF6DBFFFF8E4040 ID check: 00010015 Product name: VTU00M User partition size: 3AB400000 ( 15028M / 14.675G), 15758000128 Bytes Boot partition size: 0x200000 ( 2.0M ) RPMB partition size: 0x20000 ( 0.1M ) ID check...OK! ID check success. time:0.76 sec. Erasing... Device Ready... Device Ready...OK! ID check... Level (envy) : VCC V18 VCCQ D0 CMD CLK Pullup : 0.00 0.02 0.00 0.34 0.00 0.00 Power ON : 2.62 1.77 2.56 1.04 1.71 0.00 ------------------------------------------------------------------- eMMC ORC: C0FF8080 eMMC CID: 15010056545530304DF16C3B74AF9F eMMC CSD: D02701320F5903FFF6DBFFFF8E4040 ID check: 00010015 Product name: VTU00M User partition size: 3AB400000 ( 15028M / 14.675G), 15758000128 Bytes Boot partition size: 0x200000 ( 2.0M ) RPMB partition size: 0x20000 ( 0.1M ) ID check...OK! Erase chip...Boot1 Erase chip: 0.62 sec. Blank check chip...Boot1 Blank check chip: 0.75 sec. Erase chip...Boot2 Erase chip: 0.64 sec. Blank check chip...Boot2 Blank check chip: 0.75 sec. Erase chip...User Erase chip: 4.61 sec. Blank check chip...User Blank check chip: 603.11 sec. Erase chip success. time:610.52 sec. Writing... Device Ready... Device Ready...OK! ID check... Level (envy) : VCC V18 VCCQ D0 CMD CLK Pullup : 0.00 0.01 0.00 0.34 0.00 0.00 Power ON : 2.62 1.77 2.56 1.02 1.71 0.01 ------------------------------------------------------------------- eMMC ORC: C0FF8080 eMMC CID: 15010056545530304DF16C3B74AF9F eMMC CSD: D02701320F5903FFF6DBFFFF8E4040 ID check: 00010015 Product name: VTU00M User partition size: 3AB400000 ( 15028M / 14.675G), 15758000128 Bytes Boot partition size: 0x200000 ( 2.0M ) RPMB partition size: 0x20000 ( 0.1M ) ID check...OK! Write chip...Boot1 Write chip: 1.55 sec. >>Write chip success. time:1.55 sec.

01-28-2014, 13:02	#34 (permalink)
akashub No Life Poster Join Date: Apr 2008 Location: PROTECTED BY 308 Posts: 2,818 Member: 750001 Status: Offline Sonork: 100.1641021 Thanks Meter: 1,269	Htc wildfire Wildfire detect write sucess

01-29-2014, 08:46	#35 (permalink)
akashub No Life Poster Join Date: Apr 2008 Location: PROTECTED BY 308 Posts: 2,818 Member: 750001 Status: Offline Sonork: 100.1641021 Thanks Meter: 1,269	GPGEMMC Box Successfully Unlocked / Repaired / Flashed Phones !!! World's 1st Karboon Titanium S5 Pinouts By Great GPG EMMC BOX Note: this pinout is auto detect pinouts Wbr Akashub

01-31-2014, 16:42	#36 (permalink)
sahilfency No Life Poster Join Date: Jan 2010 Location: ANKLESHWAR,GUJARAT,INDIA Age: 42 Posts: 792 Member: 1212231 Status: Offline Sonork: 100.1611130 Thanks Meter: 164	GPGEMMC Box Successfully Unlocked / Repaired / Flashed Phones !!! HTC sensation x315e DEADBOOT REPAIR COMPLETE WITH GPG EMMC SOME JTAG SHOW ...... ERROR: DCC Loader has reported Error Code = 0x35 (0x000000). Trying to recover.. BUT GPGEMMC SOLVED THIS PROBLEM EASY HOW TO REPAIR ... DOWNLOAD 4 MB FILE FROM GPGEMMC SUPPORT MAKE JTAG JUMPER COMPLETE DETECT PIN SETPINOUT SILECT FLESH FILE & PRESS WRITE ................ AFTER WRITE U R PHONE COMPLETE ON & GOOD WORKING

02-02-2014, 12:40	#37 (permalink)
akashub No Life Poster Join Date: Apr 2008 Location: PROTECTED BY 308 Posts: 2,818 Member: 750001 Status: Offline Sonork: 100.1641021 Thanks Meter: 1,269	Sony U20i Sony u20i pattern lock removed

02-02-2014, 12:42	#38 (permalink)
swechacnu No Life Poster Join Date: Feb 2005 Location: HYD[INDIA] Age: 44 Posts: 585 Member: 115144 Status: Offline Sonork: 100.1590698 Thanks Meter: 498	GPGEMMC Box Successfully Unlocked / Repaired / Flashed Phones !!! N7100 Blank Product Name Successfully Repaired With GPG EMMC... Really Great GPGeMMC 1.12 Support For Flashing!! Perfect Tool to Recover Phone from any STATE !! I have tried so many tools N7100 Blank Product name but not success, with gpg emmc tool recovered successfully, no need to isp program just flash first 4 full flash files then write normal single flash file with efs repair it will alive phone, Here is 4 full flash file log, Code: Start Detect device. Device detected OK: COM62 Downloading.. Get PIT for mapping.. PIT Saved to: backup\samsung_pit\GT-N7100_samsung_pit_7.pit Firmware update start.. Loading: boot.img, wait. Processing: boot.img Loading: cache.img, wait. Processing: cache.img Loading: hidden.img, wait. Processing: hidden.img Loading: modem.bin, wait. Processing: modem.bin Wrong repply( FF ) Total Time: 00:00:47 -------------------------- Here is Single flash file log, Code: tart Detect device. Device detected OK: COM62 Downloading.. Get PIT for mapping.. PIT Saved to: backup\samsung_pit\GT-N7100_samsung_pit_8.pit Firmware update start.. Loading: boot.img, wait. Processing: boot.img Loading: recovery.img, wait. Processing: recovery.img Loading: system.img, wait. Processing: system.img Total Time: 00:04:26 -------------------------- Here is screenshot for success mobile, before flash and after flash same blank but working fine... BR, Srinivas Reddy.

02-03-2014, 11:12	#39 (permalink)
BEHBOODI No Life Poster Join Date: Jan 2010 Location: IRAN Posts: 1,234 Member: 1222839 Status: Offline Sonork: 100.1603618 Thanks Meter: 3,944	Samsung I9300 Android 4.3 Successfully Flashed With GPGeMMC BOX. BR, BEHBOODI

02-03-2014, 11:41	#40 (permalink)
WBGSM No Life Poster Join Date: May 2012 Location: In Your Heart Age: 38 Posts: 776 Member: 1759636 Status: Offline Sonork: 100.1591515 Thanks Meter: 785	Galaxy Note1 N7000 Restart on Samsung Done with GPGeMMC Galaxy Note1 N7000 Restart on Samsung Done with GPGeMMC 1) Connect All Points to the PCB 2) Then Read information for check is all points connected or not 3) write the boot files ( N7000.boot1 / N7000.boot2 / N7000.ext_csd ) if give some problem in writing then just leave tick mark on Erase butten and Erase 4) after erasing the chip write the boot files if again not write the files then Erase All chip 5) Then write the Boot Files it will Done 100% 6) After Flashing set will be in downloading mode then flash the set by Odin and Enjoy Br WBGSM GPGEMMC_BOX truly one EMMC programmer

02-03-2014, 13:31	#41 (permalink)
WBGSM No Life Poster Join Date: May 2012 Location: In Your Heart Age: 38 Posts: 776 Member: 1759636 Status: Offline Sonork: 100.1591515 Thanks Meter: 785	Samsung S5360 Flash Done With GPGeMMC while faild other Software Samsung S5360 Flash Done With GPGeMMC while faild other Software Here is Successfull Story with GPGeMMC Here is Video S5360 Flash Done with GPGeMMC By WBGSM - Video Dailymotion

02-03-2014, 13:58	#42 (permalink)
WBGSM No Life Poster Join Date: May 2012 Location: In Your Heart Age: 38 Posts: 776 Member: 1759636 Status: Offline Sonork: 100.1591515 Thanks Meter: 785	Samsung Galaxy S2 Pattren remove by GPGeMMC Samsung Galaxy S2 Pattren remove by GPGeMMC Volum Keys print was damage therefore cant reset manulay but GPGeMMC Done Br WBGSM GPGEMMC_BOX truly one EMMC programmer

02-03-2014, 14:51	#43 (permalink)
akashub No Life Poster Join Date: Apr 2008 Location: PROTECTED BY 308 Posts: 2,818 Member: 750001 Status: Offline Sonork: 100.1641021 Thanks Meter: 1,269	Samsung Gt-I8552 Samsung Gt-I8552 pattern lock removed by selecting model i8258

02-03-2014, 15:58	#44 (permalink)
WBGSM No Life Poster Join Date: May 2012 Location: In Your Heart Age: 38 Posts: 776 Member: 1759636 Status: Offline Sonork: 100.1591515 Thanks Meter: 785	Samsung Galaxy I905P Pattren Remove by GPGeMMC Samsung Galaxy I905P Pattren Remove by GPGeMMC Br WBGSM GPGEMMC_BOX truly one EMMC programmer

02-03-2014, 16:24	#45 (permalink)
WBGSM No Life Poster Join Date: May 2012 Location: In Your Heart Age: 38 Posts: 776 Member: 1759636 Status: Offline Sonork: 100.1591515 Thanks Meter: 785	Samsung S6810 Fame Pattren Unlock by GPGeMMC Samsung S6810 Fame Pattren Unlocked by selecting S5830 Br WBGSM GPGEMMC_BOX truly one EMMC programmer

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode