|
|
 |
|
Welcome to the GSM-Forum forums. You are currently viewing our boards as a guest which gives you limited access to view most discussions and access our other features. Only registered members may post questions, contact other members or search our database of over 8 million posts. Registration is fast, simple and absolutely free so please - Click to REGISTER! If you have any problems with the registration process or your account login, please contact contact us . |
| |||||||
| Register | FAQ | Donate | Forum Rules | Root any Device | ★iPhone Unlock★ | ★ Direct Codes ★ | Direct Unlock Source |
 |
| | LinkBack | Thread Tools | Display Modes |
01-27-2014, 21:31
| #1 (permalink) |
| Freak Poster  Join Date: Nov 2007 Location: egypt Age: 37
Posts: 245
Member: 625817 Status: Offline Sonork: 1592120 Thanks Meter: 32 | i9100g this is my log Version:V3.1 Device Ready...OK! ------------------------------------------------------ Please press Power On key before any Read/Write/Erase operation. Please press Power On key before any Read/Write/Erase operation. Please press Power On key before any Read/Write/Erase operation. Please press Power On key before any Read/Write/Erase operation. Detecting, please press power on/off button... Device Ready...OK! Detection initiated... Detecting TCK,TDO,TDI,and TMS... Detecting TRST and SYSRST... Failed to detect JTAG pins. Please try again. Time: 13.69 s Detecting, please press power on/off button... Device Ready...OK! Detection initiated... Detecting TCK,TDO,TDI,and TMS... Detecting TRST and SYSRST... Failed to detect JTAG pins. Please try again. >>Time: 10.81 s plz team healp me |
 |
|
01-27-2014, 21:48
| #2 (permalink) |
| Freak Poster Join Date: Nov 2007 Location: egypt Age: 37
Posts: 245
Member: 625817 Status: Offline Sonork: 1592120 Thanks Meter: 32 | same with v 11.1 Detecting, please press power on/off button... Device Ready...OK! Detection initiated... Detecting TCK,TDO,TDI,and TMS... Detecting TRST and SYSRST... Failed to detect JTAG pins. Please try again. Time: 12.77 s Detecting, please press power on/off button... Device Ready...OK! Detection initiated... Detecting TCK,TDO,TDI,and TMS... Detecting TRST and SYSRST... Failed to detect JTAG pins. Please try again. Time: 12.77 s Detecting, please press power on/off button... Device Ready...OK! Detection initiated... Detecting TCK,TDO,TDI,and TMS... Detecting TRST and SYSRST... Failed to detect JTAG pins. Please try again. >>Time: 12.77 s Chang pc and re-solder again note my phone before always see omap driver |
| |
|
01-27-2014, 22:16
| #3 (permalink) | |
| Cheater -Don't Deal with him-  Join Date: Apr 2006 Age: 36
Posts: 699
Member: 265129 Status: Offline Thanks Meter: 281 | Quote:
sold wire like this on GPGJTAG jig. PIN3 = SYSRST PIN5 = TDO PIN7 = RTCK PIN9 = TCK PIN11 = TMS PIN13 = TDI PIN15 = TRST and click on set pinouts. br Faizan Aslam Bhatti | |
| |
|
01-28-2014, 12:19
| #4 (permalink) | |
| Freak Poster Join Date: Nov 2007 Location: egypt Age: 37
Posts: 245
Member: 625817 Status: Offline Sonork: 1592120 Thanks Meter: 32 | Quote:
I do all this and still have problem SYSRST only detect this is my log Detecting, please press power on/off button... Device Ready...OK! Detection initiated... Detecting TCK,TDO,TDI,and TMS... Detecting TRST and SYSRST... SYSRST = 3 Failed to detect JTAG pins. Please try again. Time: 11.89 s PIN3 = SYSRST PIN5 = TDO PIN7 = RTCK PIN9 = TCK PIN11 = TMS PIN13 = TDI PIN15 = TRST Device Ready...OK! Device Ready...OK! Detecting, please press power on/off button... Device Ready...OK! Detection initiated... Detecting TCK,TDO,TDI,and TMS... Detecting TRST and SYSRST... SYSRST = 3 Failed to detect JTAG pins. Please try again. >>Time: 11.80 s | |
| |
|
01-28-2014, 12:56
| #5 (permalink) |
| Freak Poster Join Date: Nov 2007 Location: egypt Age: 37
Posts: 245
Member: 625817 Status: Offline Sonork: 1592120 Thanks Meter: 32 | this is my log with omap4430hs_espresso_1200MHZ  » Downloading 'Targets\Flash-Drivers\emmc_drv.bin' » Sending data (47160 bytes) :::::::::::::::::::: [47160] Interface 'OMAPFLASH DRIVER v6' Driver 'eMMC JESD84-A43' Driver configuration: sid = 0x00000001 Driver configuration: width = 0x00000004 Driver configuration: delay = 0x00000009 Driver configuration: rpapi_base = 0x00028400 MMC sid = 0x01 MMC mmc_volt = 0x01 MMC data_width = 0x04 MMC card_rca = 0x04 MMC card_type = 0x03 MMC data_width_support = 0x08 MMC transfer_clk_max = 0xBB80 MMC card_size = 0x1D5A000 eMMC CID MID = 0x15 // Manufacturer ID eMMC CID CBX = 0x01 // Card/BGA eMMC CID OID = 0x00 // OEM/Application ID eMMC CID PNM = 0x217D00001F39 // Product name eMMC CID PRV = 0x19 // Product revision eMMC CID PSN = 0x00001F39 // Product serial numbe r eMMC CID MDT = 0x1F // Manufacturing date eMMC CID CRC = 0x1C // CRC7 checksum eMMC CSD CSD_STRUCTURE = 0x03 // CSD structure eMMC CSD SPEC_VERS = 0x04 // System specification version eMMC CSD TAAC = 0x27 // Data read access-tim e 1 eMMC CSD NSAC = 0x01 // Data read access-tim e 2 in CLK cycles (NSAC*100) eMMC CSD TRAN_SPEED = 0x32 // Max. bus clock frequ ency eMMC CSD CCC = 0x00F5 // Card command classes eMMC CSD READ_BL_LEN = 0x09 // Max. read data block length eMMC CSD READ_BL_PARTIAL = 0x00 // Partial blocks for r ead allowed eMMC CSD WRITE_BLK_MISALIGN = 0x00 // Write block misalign ment eMMC CSD READ_BLK_MISALIGN = 0x00 // Read block misalignm ent eMMC CSD DSR_IMP = 0x00 // DSR implemented eMMC CSD C_SIZE = 0x00FF // Device size eMMC CSD VDD_R_CURR_MIN = 0x06 // Max. read current @ VDD min eMMC CSD VDD_R_CURR_MAX = 0x06 // Max. read current @ VDD max eMMC CSD VDD_W_CURR_MIN = 0x06 // Max. write current @ VDD min eMMC CSD VDD_W_CURR_MAX = 0x06 // Max. write current @ VDD max eMMC CSD C_SIZE_MULT = 0x01 // Device size multipli er eMMC CSD ERASE_GRP_SIZE = 0x1F // Erase group size eMMC CSD ERASE_GRP_MULT = 0x1F // Erase group size mul tiplier eMMC CSD WP_GRP_SIZE = 0x0F // Write protect group size eMMC CSD WP_GRP_ENABLE = 0x01 // Write protect group enable eMMC CSD DEFAULT_ECC = 0x00 // Manufacturer default ECC eMMC CSD R2W_FACTOR = 0x02 // Write speed factor eMMC CSD WRITE_BL_LEN = 0x09 // Max. write data bloc k length eMMC CSD WRITE_BL_PARTIAL = 0x00 // Partial blocks for w rite allowed eMMC CSD CONTENT_PROT_APP = 0x00 // Content protection a pplication eMMC CSD FILE_FORMAT_GRP = 0x00 // File format group eMMC CSD COPY = 0x01 // Copy flag (OTP) eMMC CSD PERM_WRITE_PROTECT = 0x00 // Permanent write prot ection eMMC CSD TMP_WRITE_PROTECT = 0x00 // Temporary write prot ection eMMC CSD FILE_FORMAT = 0x00 // File format eMMC CSD ECC = 0x00 // ECC code eMMC CSD CRC = 0x33 // CRC eMMC EXT_CSD S_CMD_SET = 0x00 // Supported Command Se ts eMMC EXT_CSD BOOT_INFO = 0x15 // Boot information eMMC EXT_CSD BOOT_SIZE_MULTI = 0x0A // Boot partition size eMMC EXT_CSD ACC_SIZE = 0x07 // Access size eMMC EXT_CSD HC_ERASE_GRP_SIZE = 0x00 // High-capacity erase unit size eMMC EXT_CSD ERASE_TIMEOUT_MULT = 0x04 // High-capacity erase timeout eMMC EXT_CSD REL_WR_SEC_C = 0x07 // Reliable write secto r count eMMC EXT_CSD HC_WP_GRP_SIZE = 0x01 // High-capacity write protect group size eMMC EXT_CSD S_C_VCC = 0x01 // Sleep current (VCC) eMMC EXT_CSD S_C_VCCQ = 0x01 // Sleep current (VCCQ) eMMC EXT_CSD S_A_TIMEOUT = 0x07 // Sleep/awake timeout eMMC EXT_CSD SEC_COUNT = 0x01D5A000 // Sector Count eMMC EXT_CSD MIN_PERF_W_8_52 = 0xA0 // Minimum Write Perfor mance for 8bit at 52MHz eMMC EXT_CSD MIN_PERF_R_8_52 = 0x00 // Minimum Read Perform ance for 8bit at 52MHz eMMC EXT_CSD MIN_PERF_W_8_26_4_52 = 0x00 // Minimum Write Perfor mance for 8bit at 26MHz, for 4bit at 52MHz eMMC EXT_CSD MIN_PERF_R_8_26_4_52 = 0x00 // Minimum Read Perform ance for 8bit at 26MHz, for 4bit at 52MHz eMMC EXT_CSD MIN_PERF_W_4_26 = 0x00 // Minimum Write Perfor mance for 4bit at 26MHz eMMC EXT_CSD MIN_PERF_R_4_26 = 0x00 // Minimum Read Perform ance for 4bit at 26MHz eMMC EXT_CSD PWR_CL_26_360 = 0x00 // Power class for 26MH z at 3.6V eMMC EXT_CSD PWR_CL_52_360 = 0x00 // Power class for 52MH z at 3.6V eMMC EXT_CSD PWR_CL_26_195 = 0x00 // Power class for 26MH z at 1.95V eMMC EXT_CSD PWR_CL_52_195 = 0x00 // Power class for 52MH z at 1.95V eMMC EXT_CSD CARD_TYPE = 0x01 // Card type eMMC EXT_CSD CSD_STRUCTURE = 0x00 // CSD structure versio n eMMC EXT_CSD EXT_CSD_REV = 0x00 // Extended CSD revisio n eMMC EXT_CSD CMD_SET = 0x02 // Command set eMMC EXT_CSD CMD_SET_REV = 0x05 // Command set revision eMMC EXT_CSD POWER_CLASS = 0x00 // Power class eMMC EXT_CSD HS_TIMING = 0x00 // High-speed interface timing eMMC EXT_CSD BUS_WIDTH = 0x00 // Bus width mode eMMC EXT_CSD ERASED_MEM_CONT = 0x00 // Erased memory conten t eMMC EXT_CSD BOOT_CONFIG = 0x00 // Boot configuration eMMC EXT_CSD BOOT_BUS_WIDTH = 0x00 // Boot bus width1 eMMC EXT_CSD ERASE_GROUP_DEF = 0x00 // High-density erase g roup definition EMMC eMMC DRIVER INIT COMPLETE » Downloading complete » Elapsed time: 0:00.448 (105267 bytes/s) » End loading driver » Downloading » Downloading 'Targets\Projects\espresso\MLO.hs' » Sending data (262144 bytes) :::::::::::::::::::: [262144] » Downloading complete » Elapsed time: 0:00.309 (848362 bytes/s) » Looking for a driver for 'EMMC' » chip_driver EMMC Targets\Flash-Drivers\emmc_drv.bin sid 1 width 4 delay 9 rpap i_base 0x00028400 » Downloading driver EMMC eMMC DRIVER DEINIT COMPLETE » Downloading 'Targets\Flash-Drivers\emmc_drv.bin' » Sending data (47160 bytes) :::::::::::::::::::: [47160] Interface 'OMAPFLASH DRIVER v6' Driver 'eMMC JESD84-A43' Driver configuration: sid = 0x00000001 Driver configuration: width = 0x00000004 Driver configuration: delay = 0x00000009 Driver configuration: rpapi_base = 0x00028400 MMC sid = 0x01 MMC mmc_volt = 0x01 MMC data_width = 0x04 MMC card_rca = 0x04 MMC card_type = 0x03 MMC data_width_support = 0x08 MMC transfer_clk_max = 0xBB80 MMC card_size = 0x1D5A000 eMMC CID MID = 0x15 // Manufacturer ID eMMC CID CBX = 0x01 // Card/BGA eMMC CID OID = 0x00 // OEM/Application ID eMMC CID PNM = 0x217D00001F39 // Product name eMMC CID PRV = 0x19 // Product revision eMMC CID PSN = 0x00001F39 // Product serial numbe r eMMC CID MDT = 0x1F // Manufacturing date eMMC CID CRC = 0x1C // CRC7 checksum eMMC CSD CSD_STRUCTURE = 0x03 // CSD structure eMMC CSD SPEC_VERS = 0x04 // System specification version eMMC CSD TAAC = 0x27 // Data read access-tim e 1 eMMC CSD NSAC = 0x01 // Data read access-tim e 2 in CLK cycles (NSAC*100) eMMC CSD TRAN_SPEED = 0x32 // Max. bus clock frequ ency eMMC CSD CCC = 0x00F5 // Card command classes eMMC CSD READ_BL_LEN = 0x09 // Max. read data block length eMMC CSD READ_BL_PARTIAL = 0x00 // Partial blocks for r ead allowed eMMC CSD WRITE_BLK_MISALIGN = 0x00 // Write block misalign ment eMMC CSD READ_BLK_MISALIGN = 0x00 // Read block misalignm ent eMMC CSD DSR_IMP = 0x00 // DSR implemented eMMC CSD C_SIZE = 0x00FF // Device size eMMC CSD VDD_R_CURR_MIN = 0x06 // Max. read current @ VDD min eMMC CSD VDD_R_CURR_MAX = 0x06 // Max. read current @ VDD max eMMC CSD VDD_W_CURR_MIN = 0x06 // Max. write current @ VDD min eMMC CSD VDD_W_CURR_MAX = 0x06 // Max. write current @ VDD max eMMC CSD C_SIZE_MULT = 0x01 // Device size multipli er eMMC CSD ERASE_GRP_SIZE = 0x1F // Erase group size eMMC CSD ERASE_GRP_MULT = 0x1F // Erase group size mul tiplier eMMC CSD WP_GRP_SIZE = 0x0F // Write protect group size eMMC CSD WP_GRP_ENABLE = 0x01 // Write protect group enable eMMC CSD DEFAULT_ECC = 0x00 // Manufacturer default ECC eMMC CSD R2W_FACTOR = 0x02 // Write speed factor eMMC CSD WRITE_BL_LEN = 0x09 // Max. write data bloc k length eMMC CSD WRITE_BL_PARTIAL = 0x00 // Partial blocks for w rite allowed eMMC CSD CONTENT_PROT_APP = 0x00 // Content protection a pplication eMMC CSD FILE_FORMAT_GRP = 0x00 // File format group eMMC CSD COPY = 0x01 // Copy flag (OTP) eMMC CSD PERM_WRITE_PROTECT = 0x00 // Permanent write prot ection eMMC CSD TMP_WRITE_PROTECT = 0x00 // Temporary write prot ection eMMC CSD FILE_FORMAT = 0x00 // File format eMMC CSD ECC = 0x00 // ECC code eMMC CSD CRC = 0x33 // CRC eMMC EXT_CSD S_CMD_SET = 0x00 // Supported Command Se ts eMMC EXT_CSD BOOT_INFO = 0x15 // Boot information eMMC EXT_CSD BOOT_SIZE_MULTI = 0x0A // Boot partition size eMMC EXT_CSD ACC_SIZE = 0x07 // Access size eMMC EXT_CSD HC_ERASE_GRP_SIZE = 0x00 // High-capacity erase unit size eMMC EXT_CSD ERASE_TIMEOUT_MULT = 0x04 // High-capacity erase timeout eMMC EXT_CSD REL_WR_SEC_C = 0x07 // Reliable write secto r count eMMC EXT_CSD HC_WP_GRP_SIZE = 0x01 // High-capacity write protect group size eMMC EXT_CSD S_C_VCC = 0x01 // Sleep current (VCC) eMMC EXT_CSD S_C_VCCQ = 0x01 // Sleep current (VCCQ) eMMC EXT_CSD S_A_TIMEOUT = 0x07 // Sleep/awake timeout eMMC EXT_CSD SEC_COUNT = 0x01D5A000 // Sector Count eMMC EXT_CSD MIN_PERF_W_8_52 = 0xA0 // Minimum Write Perfor mance for 8bit at 52MHz eMMC EXT_CSD MIN_PERF_R_8_52 = 0x00 // Minimum Read Perform ance for 8bit at 52MHz eMMC EXT_CSD MIN_PERF_W_8_26_4_52 = 0x00 // Minimum Write Perfor mance for 8bit at 26MHz, for 4bit at 52MHz eMMC EXT_CSD MIN_PERF_R_8_26_4_52 = 0x00 // Minimum Read Perform ance for 8bit at 26MHz, for 4bit at 52MHz eMMC EXT_CSD MIN_PERF_W_4_26 = 0x00 // Minimum Write Perfor mance for 4bit at 26MHz eMMC EXT_CSD MIN_PERF_R_4_26 = 0x00 // Minimum Read Perform ance for 4bit at 26MHz eMMC EXT_CSD PWR_CL_26_360 = 0x00 // Power class for 26MH z at 3.6V eMMC EXT_CSD PWR_CL_52_360 = 0x00 // Power class for 52MH z at 3.6V eMMC EXT_CSD PWR_CL_26_195 = 0x00 // Power class for 26MH z at 1.95V eMMC EXT_CSD PWR_CL_52_195 = 0x00 // Power class for 52MH z at 1.95V eMMC EXT_CSD CARD_TYPE = 0x01 // Card type eMMC EXT_CSD CSD_STRUCTURE = 0x00 // CSD structure versio n eMMC EXT_CSD EXT_CSD_REV = 0x00 // Extended CSD revisio n eMMC EXT_CSD CMD_SET = 0x02 // Command set eMMC EXT_CSD CMD_SET_REV = 0x05 // Command set revision eMMC EXT_CSD POWER_CLASS = 0x00 // Power class eMMC EXT_CSD HS_TIMING = 0x00 // High-speed interface timing eMMC EXT_CSD BUS_WIDTH = 0x00 // Bus width mode eMMC EXT_CSD ERASED_MEM_CONT = 0x00 // Erased memory conten t eMMC EXT_CSD BOOT_CONFIG = 0x00 // Boot configuration eMMC EXT_CSD BOOT_BUS_WIDTH = 0x00 // Boot bus width1 eMMC EXT_CSD ERASE_GROUP_DEF = 0x00 // High-density erase g roup definition EMMC eMMC DRIVER INIT COMPLETE » Downloading complete » Elapsed time: 0:00.313 (150670 bytes/s) » End loading driver » Downloading » Downloading 'Targets\Projects\espresso\Sbl.bin' » Sending data (1310720 bytes) :::::::::::::::::::: [1310720] » Downloading complete » Elapsed time: 0:01.079 (1310720 bytes/s) » cold_sw_reset » Elapsed time: 0:10.174 Press any key to continue . . . plz help me |
| |
|
01-28-2014, 14:01
| #6 (permalink) |
| Freak Poster Join Date: Nov 2007 Location: egypt Age: 37
Posts: 245
Member: 625817 Status: Offline Sonork: 1592120 Thanks Meter: 32 | with riff pin out no luck log: PIN3 = SYSRST PIN5 = TDO PIN7 = RTCK PIN9 = TCK PIN11 = TMS PIN13 = TDI PIN15 = TRST Device Ready...OK! Detecting, please press power on/off button... Device Ready...OK! Detection initiated... Detecting TCK,TDO,TDI,and TMS... Detecting TRST and SYSRST... SYSRST = 7 Failed to detect JTAG pins. Please try again. Time: 12.98 s Please press Power On key before any Read/Write/Erase operation. Detecting, please press power on/off button... Device Ready...OK! Detection initiated... Detecting TCK,TDO,TDI,and TMS... Detecting TRST and SYSRST... SYSRST = 7 Failed to detect JTAG pins. Please try again. Time: 12.56 s Please press Power On key before any Read/Write/Erase operation. Detecting, please press power on/off button... Device Ready...OK! Detection initiated... Detecting TCK,TDO,TDI,and TMS... Detecting TRST and SYSRST... SYSRST = 7 Failed to detect JTAG pins. Please try again. >>Time: 13.47 s plz tell me what is wrong |
| |
|
01-28-2014, 17:48
| #7 (permalink) |
| Cheater -Don't Deal with him- Join Date: Jul 2012 Age: 41
Posts: 346
Member: 1791133 Status: Offline Thanks Meter: 89 | please make sure that phone is connected to USB +5v also connected to battery/power supply and while detecting pinouts keep power button pressed try 3-4 times you should get it done. |
| |
|
| Bookmarks |
| |
|
|
Linear Mode
