GSM Shop GSM Shop
GSM-Forum  

Welcome to the GSM-Forum forums.

You are currently viewing our boards as a guest which gives you limited access to view most discussions and access our other features.
Only registered members may post questions, contact other members or search our database of over 8 million posts.

Registration is fast, simple and absolutely free so please - Click to REGISTER!

If you have any problems with the registration process or your account login, please contact contact us .

Go Back   GSM-Forum > Product Support Sections > No More Supported Solutions (Dead Products) > No More Supported H/W Products > GPGeMMC

Reply
 
LinkBack Thread Tools Display Modes
Old 01-26-2014, 16:00   #1 (permalink)
Freak Poster
 
atif ikram's Avatar
 
Join Date: Aug 2011
Posts: 255
Member: 1644460
Status: Offline
Thanks Meter: 44
N7100 Repair done with GPGeMMC Box While Other fails


Other Box can't Write File... LOG from other box

Box Working Mode: JTAG Box.
Box Drivers version: 3.0.0.0, are OK
Z3X Card Serial : xxxx-xxxx , ver: 22
Writing file...G:\Jtag\easy jtag\N7100\EMMC_00000000_00200000.bin
Successefuly connected to box on COM46
Box S/N: ddddddddddddd, ,FW Ver.: 01.48
Loading eMMC Addon Firmware...
CMD Pullup Level:1381 mV
CMD Active Level:1753 mV
EMMC CID 15010056545530304D006C3B74AF9F63
EMMC CSD D02701320F5903FFF6DBFFFF8E40406D
EMMC Manufacturer ID: 15
EMMC OEM ID: 0100
EMMC Date: 09/2012 FW rev.0x0 HW rev.0x0
EMMC Serial #: 1815835823
EMMC NAME: VTU00M
EMMC Capacity: 15028 MB (High Density Card)
Writing 000000200000 bytes to 00000000 ...ROM2
Retry writing adress 0x00000000
Retry writing adress 0x00000000
Retry writing adress 0x00000000
Retry writing adress 0x00000000


Done with GPGeMMC



Read Info...
Device Ready...
Device Ready...OK!
ID check...
Level (envy) : VCC V18 VCCQ D0 CMD CLK
Pullup : 0.00 0.02 0.00 0.35 0.00 0.00
Power ON : 2.62 1.77 2.56 0.73 0.05 0.00
-------------------------------------------------------------------
eMMC ORC: 00000000,bad code!
ID check lost!
Read Info...
Device Ready...
Device Ready...OK!
ID check...
Level (envy) : VCC V18 VCCQ D0 CMD CLK
Pullup : 0.00 0.01 0.00 0.34 0.00 0.00
Power ON : 2.62 1.77 2.55 1.05 1.71 0.00
-------------------------------------------------------------------
eMMC ORC: C0FF8080
eMMC CID: 15010056545530304DF16C3B74AF9F
eMMC CSD: D02701320F5903FFF6DBFFFF8E4040
ID check: 00010015
Product name: VTU00M
User partition size: 3AB400000 ( 15028M / 14.675G), 15758000128 Bytes
Boot partition size: 0x200000 ( 2.0M )
RPMB partition size: 0x20000 ( 0.1M )
ID check...OK!
ID check success. time:0.76 sec.
Erasing...
Device Ready...
Device Ready...OK!
ID check...
Level (envy) : VCC V18 VCCQ D0 CMD CLK
Pullup : 0.00 0.02 0.00 0.34 0.00 0.00
Power ON : 2.62 1.77 2.56 1.04 1.71 0.00
-------------------------------------------------------------------
eMMC ORC: C0FF8080
eMMC CID: 15010056545530304DF16C3B74AF9F
eMMC CSD: D02701320F5903FFF6DBFFFF8E4040
ID check: 00010015
Product name: VTU00M
User partition size: 3AB400000 ( 15028M / 14.675G), 15758000128 Bytes
Boot partition size: 0x200000 ( 2.0M )
RPMB partition size: 0x20000 ( 0.1M )
ID check...OK!
Erase chip...Boot1
Erase chip: 0.62 sec.
Blank check chip...Boot1
Blank check chip: 0.75 sec.
Erase chip...Boot2
Erase chip: 0.64 sec.
Blank check chip...Boot2
Blank check chip: 0.75 sec.
Erase chip...User
Erase chip: 4.61 sec.
Blank check chip...User
Blank check chip: 603.11 sec.
Erase chip success. time:610.52 sec.
Writing...
Device Ready...
Device Ready...OK!
ID check...
Level (envy) : VCC V18 VCCQ D0 CMD CLK
Pullup : 0.00 0.01 0.00 0.34 0.00 0.00
Power ON : 2.62 1.77 2.56 1.02 1.71 0.01
-------------------------------------------------------------------
eMMC ORC: C0FF8080
eMMC CID: 15010056545530304DF16C3B74AF9F
eMMC CSD: D02701320F5903FFF6DBFFFF8E4040
ID check: 00010015
Product name: VTU00M
User partition size: 3AB400000 ( 15028M / 14.675G), 15758000128 Bytes
Boot partition size: 0x200000 ( 2.0M )
RPMB partition size: 0x20000 ( 0.1M )
ID check...OK!
Write chip...Boot1
Write chip: 1.55 sec.
>>Write chip success. time:1.55 sec.

Last edited by atif ikram; 01-26-2014 at 16:06.
  Reply With Quote
The Following 3 Users Say Thank You to atif ikram For This Useful Post:
Show/Hide list of the thanked
Old 01-26-2014, 16:34   #2 (permalink)
No Life Poster
 
Join Date: May 2007
Age: 40
Posts: 1,316
Member: 515130
Status: Offline
Thanks Meter: 304
bro i try but my phone error write chip lost
Attached Images
File Type: jpg erase succesfull.JPG (181.4 KB, 853 views)
File Type: jpg write chip lost.JPG (190.4 KB, 629 views)
  Reply With Quote
Old 01-26-2014, 17:21   #3 (permalink)
No Life Poster
 
Join Date: May 2007
Age: 40
Posts: 1,316
Member: 515130
Status: Offline
Thanks Meter: 304
hello team i am waiting your reply
  Reply With Quote
Old 01-26-2014, 18:43   #4 (permalink)
Cheater -Don't Deal with him-
 
Join Date: Apr 2006
Age: 36
Posts: 699
Member: 265129
Status: Offline
Thanks Meter: 281
Quote:
Originally Posted by shahzad-0004 View Post
bro i try but my phone error write chip lost
bro please again sold wire . looking like you have missing some connection.

br

Faizan Aslam Bhatti
  Reply With Quote
Old 01-26-2014, 20:11   #5 (permalink)
No Life Poster
 
Join Date: May 2007
Age: 40
Posts: 1,316
Member: 515130
Status: Offline
Thanks Meter: 304
Quote:
Originally Posted by faizanbhatti94 View Post
bro please again sold wire . looking like you have missing some connection.

br

Faizan Aslam Bhatti
bro my phone erase successfully

write problem check wire?
  Reply With Quote
Old 01-26-2014, 21:36   #6 (permalink)
Cheater -Don't Deal with him-
 
Join Date: Apr 2006
Age: 36
Posts: 699
Member: 265129
Status: Offline
Thanks Meter: 281
Quote:
Originally Posted by shahzad-0004 View Post
bro my phone erase successfully

write problem check wire?
bro untick all only write boot1 .Samsung_N7100_GPG_New_(The_number_of_mobile_phone)


br

Faizan Aslam Bhatti
  Reply With Quote
Old 01-27-2014, 11:59   #7 (permalink)
No Life Poster
 
Join Date: May 2007
Age: 40
Posts: 1,316
Member: 515130
Status: Offline
Thanks Meter: 304
Quote:
Originally Posted by faizanbhatti94 View Post
bro untick all only write boot1 .Samsung_N7100_GPG_New_(The_number_of_mobile_phone)


br

Faizan Aslam Bhatti
already try but sem error
  Reply With Quote
Old 01-27-2014, 12:10   #8 (permalink)
No Life Poster
 
akashub's Avatar
 
Join Date: Apr 2008
Location: PROTECTED BY 308
Posts: 2,818
Member: 750001
Status: Offline
Sonork: 100.1641021
Thanks Meter: 1,269
Quote:
Originally Posted by shahzad-0004 View Post
already try but sem error
contact me on yahoo , sonork or skype

ill try to solve ur prblem ....

WBR
  Reply With Quote
Old 02-17-2014, 01:59   #9 (permalink)
No Life Poster
 
Join Date: May 2007
Age: 40
Posts: 1,316
Member: 515130
Status: Offline
Thanks Meter: 304
Hello gpg team

i again try repair my n7100 dead


my phone show product name: 000000

user boot2 ext_csd. write ok

write rom1 but error write chip lost!

solution please
Attached Images
File Type: jpg write user.JPG (199.3 KB, 280 views)
File Type: jpg write rom 2.JPG (202.9 KB, 197 views)
File Type: jpg write ext_csd.JPG (201.2 KB, 213 views)
  Reply With Quote
Old 02-17-2014, 08:25   #10 (permalink)
Registered User
 
Join Date: Feb 2014
Location: indonesia
Posts: 15
Member: 2130124
Status: Offline
Thanks Meter: 3
Thumbs up

goot tanks informasion
  Reply With Quote
Old 04-05-2014, 12:28   #11 (permalink)
No Life Poster
 
Join Date: Aug 2011
Location: nigeria
Posts: 508
Member: 1628342
Status: Offline
Sonork: 1592100
Thanks Meter: 38
how do i go about mine, samsung n7100, no product no imei, erase and write sucessfull but phone blank, system recognise it but cant flash here is the log
4/5/2014 11:33:49 AM >>------------------------------------------------------
4/5/2014 11:41:17 AM >>Connecting...
4/5/2014 11:41:18 AM >>SN:00000xxxxxx
4/5/2014 11:41:19 AM >>Get License data...
4/5/2014 11:41:19 AM >>Verify Liecnse data...
4/5/2014 11:41:19 AM >>Version:V3.1
4/5/2014 11:41:19 AM >> Device Ready...OK!
4/5/2014 11:41:19 AM >>------------------------------------------------------
4/5/2014 11:41:23 AM >>Erasing...
4/5/2014 11:41:23 AM >> Device Ready...
4/5/2014 11:41:24 AM >> Device Ready...OK!
4/5/2014 11:41:24 AM >>ID check...
4/5/2014 11:41:26 AM >>Level (V) : VCC V18 VCCQ D0 CMD CLK
4/5/2014 11:41:26 AM >>Pullup : 0.02 0.01 0.02 0.32 0.00 0.00
4/5/2014 11:41:26 AM >>Power ON : 2.62 1.77 2.53 1.00 1.69 0.00
4/5/2014 11:41:26 AM >>-------------------------------------------------------------------
4/5/2014 11:41:26 AM >>eMMC ORC: C0FF8080
4/5/2014 11:41:26 AM >>eMMC CID: 15010056545530304DF1A396563D8F
4/5/2014 11:41:26 AM >>eMMC CSD: D02701320F5903FFF6DBFFFF8E4040
4/5/2014 11:41:26 AM >>ID check: 00010015
4/5/2014 11:41:27 AM >>Product name: VTU00M
4/5/2014 11:41:27 AM >>User partition size: 3AB400000 ( 15028M / 14.675G), 15758000128 Bytes
4/5/2014 11:41:27 AM >>Boot partition size: 0x200000 ( 2.0M )
4/5/2014 11:41:27 AM >>RPMB partition size: 0x20000 ( 0.1M )
4/5/2014 11:41:27 AM >>ID check...OK!
4/5/2014 11:41:27 AM >>Erase chip...Boot1
4/5/2014 11:41:27 AM >>Erase chip: 0.41 sec.
4/5/2014 11:41:27 AM >>Blank check chip...Boot1
4/5/2014 11:41:28 AM >>Blank check chip: 0.78 sec.
4/5/2014 11:41:28 AM >>Erase chip...Boot2
4/5/2014 11:41:28 AM >>Erase chip: 0.44 sec.
4/5/2014 11:41:28 AM >>Blank check chip...Boot2
4/5/2014 11:41:29 AM >>Blank check chip: 0.81 sec.
4/5/2014 11:41:29 AM >>Erase chip...User
4/5/2014 11:41:34 AM >>Erase chip: 4.17 sec.
4/5/2014 11:41:34 AM >>Blank check chip...User
4/5/2014 11:51:39 AM >>Blank check chip: 605.44 sec.
4/5/2014 11:51:39 AM >>Erase chip success. time:612.53 sec.
4/5/2014 11:51:57 AM >>Writing...
4/5/2014 11:51:57 AM >> Device Ready...
4/5/2014 11:51:58 AM >> Device Ready...OK!
4/5/2014 11:51:58 AM >>ID check...
4/5/2014 11:52:00 AM >>Level (V) : VCC V18 VCCQ D0 CMD CLK
4/5/2014 11:52:00 AM >>Pullup : 0.14 0.01 0.01 0.32 0.00 0.00
4/5/2014 11:52:00 AM >>Power ON : 2.63 1.76 2.53 0.97 1.69 0.00
4/5/2014 11:52:00 AM >>-------------------------------------------------------------------
4/5/2014 11:52:00 AM >>eMMC ORC: C0FF8080
4/5/2014 11:52:00 AM >>eMMC CID: 15010056545530304DF1A396563D8F
4/5/2014 11:52:00 AM >>eMMC CSD: D02701320F5903FFF6DBFFFF8E4040
4/5/2014 11:52:00 AM >>ID check: 00010015
4/5/2014 11:52:00 AM >>Product name: VTU00M
4/5/2014 11:52:00 AM >>User partition size: 3AB400000 ( 15028M / 14.675G), 15758000128 Bytes
4/5/2014 11:52:01 AM >>Boot partition size: 0x200000 ( 2.0M )
4/5/2014 11:52:01 AM >>RPMB partition size: 0x20000 ( 0.1M )
4/5/2014 11:52:01 AM >>ID check...OK!
4/5/2014 11:52:01 AM >>Erase chip...Boot1
4/5/2014 11:52:01 AM >>Erase chip: 0.38 sec.
4/5/2014 11:52:01 AM >>Blank check chip...Boot1
4/5/2014 11:52:02 AM >>Blank check chip: 0.78 sec.
4/5/2014 11:52:02 AM >>Write chip...Boot1
4/5/2014 11:52:04 AM >>Write chip: 1.69 sec.
4/5/2014 11:52:04 AM >>Verify chip...Boot1
4/5/2014 11:52:04 AM >>Verify chip: 0.76 sec.
4/5/2014 11:52:04 AM >>Erase chip...Boot2
4/5/2014 11:52:05 AM >>Erase chip: 0.39 sec.
4/5/2014 11:52:05 AM >>Blank check chip...Boot2
4/5/2014 11:52:06 AM >>Blank check chip: 0.77 sec.
4/5/2014 11:52:06 AM >>Write chip...Boot2
4/5/2014 11:52:07 AM >>Write chip: 1.64 sec.
4/5/2014 11:52:07 AM >>Verify chip...Boot2
4/5/2014 11:52:08 AM >>Verify chip: 0.81 sec.
4/5/2014 11:52:09 AM >>Write chip success. time:7.77 sec.
4/5/2014 11:52:13 AM >>The device has been disconnected.
  Reply With Quote
Old 10-09-2014, 20:22   #12 (permalink)
Junior Member
 
Join Date: Apr 2014
Posts: 1
Member: 2170694
Status: Offline
Thanks Meter: 0
bro....i have problem N7100 Blank erase...

this is log

Device Ready...
Device Ready...OK!
ID check...
Level (V): VCC V18 VCCQ D0 CMD CLK
3.3 Pullup: 0.07 0.35 0.00 0.64 0.64 0.05
Power On : 2.74 1.75 2.48 0.59 0.61 0.00
Set Low : 2.74 1.75 2.48 0.01 0.00 0.00
Set High: 2.74 1.76 2.48 2.23 2.25 2.25
...
Work Voltage: 2.74 1.75 2.48 0.59 2.24 0.00
---------------------------------------------------
eMMC ORC: C0FF8080 FF
eMMC CID: 150100303030303030562011072658
eMMC CSD: 902701320F5903FFF6DBFFEF8A4040
ID check: 00010015
Product name: 000000
User partition size: 400000000 ( 16384M / 16.000G), 17179869184 Bytes
Boot partition size: 0x80000 ( 0.5M )
RPMB partition size: 0x20000 ( 0.1M )
ID check...OK!
Erase chip...Boot1
Erase chip: 10.36 sec.
Blank check chip...Boot1
Blank check chip: 3.16 sec.
Error position of blanking in writing:
Error(1)!
Write chip lost!
The device has been disconnected.
>>------------------------------------------------------
  Reply With Quote
Old 11-01-2014, 12:06   #13 (permalink)
Major Poster
 
Join Date: Mar 2013
Location: RS BRASIL
Age: 37
Posts: 44
Member: 1898890
Status: Offline
Thanks Meter: 10
solution Write chip lost!
  Reply With Quote
Old 11-08-2014, 20:02   #14 (permalink)
Crazy Poster
 
Join Date: Feb 2009
Location: Myanmar
Posts: 55
Member: 983242
Status: Offline
Sonork: 100.1660072:om
Thanks Meter: 3
n7100 full flash done but not wake up screen. cant flash odin also
  Reply With Quote
Reply

Bookmarks

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


 



All times are GMT +1. The time now is 11:04.



Powered by Searchlight © 2024 Axivo Inc.
vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2024 DragonByte Technologies Ltd.
- GSM Hosting Ltd. - 1999-2023 -
Page generated in 0.22984 seconds with 9 queries

SEO by vBSEO