repairing I9070 Power ADAPTOR By GPGeMMC - GSM-Forum

LuisinhoCell · 08-13-2014, 20:04

Read Info

Code:

  Erasing...
   Device Ready...
   Device Ready...OK!
  ID check...
  Level (V):	VCC    V18    VCCQ    D0    CMD    CLK
  3.3 Pullup:	0.01    0.00     0.00    0.05    2.14    0.03
  Power On  :	2.73    1.80     2.48    0.03    1.87    0.04
  Set   Low :	2.73    1.80     2.48    0.04    0.04    0.02
  Set   High:	2.73    1.79     2.48    0.66    2.55    2.54
  ...
  Work Voltage:	2.73    1.80     2.48    1.28    2.55    0.00
  ---------------------------------------------------
  eMMC ORC: C0FF8080     AF
  eMMC CID: 45010053454D3038479005E79C5B30
  eMMC CSD: D00F00320F5903FFFFFFFFFF924040
  ID check: 00010045
  Product name: SEM08G
  User partition size: 1D2000000 ( 7456M / 7.281G), 7818182656 Bytes 
  Boot partition size: 0x200000 ( 2.0M )
  RPMB partition size: 0x20000 ( 0.1M )
  ID check...OK!
  Erase chip...User
>>Erase chip success. time:7.06 sec.

Write Chip

Code:

Writing...
   Device Ready...
   Device Ready...OK!
  ID check...
  Level (V):	VCC    V18    VCCQ    D0    CMD    CLK
  3.3 Pullup:	0.00    0.00     0.00    1.71    2.14    0.03
  Power On  :	2.73    1.80     2.48    1.22    1.87    0.04
  Set   Low :	2.73    1.80     2.48    0.02    0.04    0.00
  Set   High:	2.73    1.80     2.48    2.53    2.55    2.54
  ...
  Work Voltage:	2.73    1.80     2.48    1.21    2.55    0.00
  ---------------------------------------------------
  eMMC ORC: C0FF8080     AF
  eMMC CID: 45010053454D3038479005E79C5B30
  eMMC CSD: D00F00320F5903FFFFFFFFFF924040
  ID check: 00010045
  Product name: SEM08G
  User partition size: 1D2000000 ( 7456M / 7.281G), 7818182656 Bytes 
  Boot partition size: 0x200000 ( 2.0M )
  RPMB partition size: 0x20000 ( 0.1M )
  ID check...OK!
  Write chip...User
  Write chip:  1946.31 sec.

Br
LuisinhoCell

FORUM-FON · 09-11-2014, 08:32

R U Connect Any Power Supply ( battery or Usb ) or Only Pinout ?

I try to Connect Only Pin Out But Some Error !

sahilfency · 09-11-2014, 13:49

power adepter is better for emmc
but if u controll power
so u can do every think without any adepter

FORUM-FON · 09-11-2014, 15:50

How to Solve My Problem

i have no Power Adapter

LuisinhoCell · 09-17-2014, 14:15

Quote:

Originally Posted by FORUM-FON

How to Solve My Problem

i have no Power Adapter

try to buy
'll Solve 101% of your problems

WBGSM · 09-18-2014, 09:25

Quote:

Originally Posted by FORUM-FON

How to Solve My Problem

i have no Power Adapter

tell to your reseller from whom u buy GPGeMMC he will Provide you Adopter for free .

br
WBGSM

SkyNet4u · 10-03-2014, 13:27

Reply on Wrong Post..

10-03-2014, 13:27	#7 (permalink)
SkyNet4u No Life Poster Join Date: Jul 2007 Posts: 808 Member: 551619 Status: Offline Thanks Meter: 136	Reply on Wrong Post.. Last edited by SkyNet4u; 10-03-2014 at 13:29. Reason: Please Delete this Post

09-11-2014, 08:32	#2 (permalink)
FORUM-FON Freak Poster Join Date: Oct 2012 Location: Gsmhosting Forum Posts: 433 Member: 1832100 Status: Offline Thanks Meter: 63	R U Connect Any Power Supply ( battery or Usb ) or Only Pinout ? I try to Connect Only Pin Out But Some Error !

09-11-2014, 13:49	#3 (permalink)
sahilfency No Life Poster Join Date: Jan 2010 Location: ANKLESHWAR,GUJARAT,INDIA Age: 41 Posts: 792 Member: 1212231 Status: Offline Sonork: 100.1611130 Thanks Meter: 164	power adepter is better for emmc but if u controll power so u can do every think without any adepter

09-11-2014, 15:50	#4 (permalink)
FORUM-FON Freak Poster Join Date: Oct 2012 Location: Gsmhosting Forum Posts: 433 Member: 1832100 Status: Offline Thanks Meter: 63	How to Solve My Problem i have no Power Adapter