GSM Shop GSM Shop
GSM-Forum  

Welcome to the GSM-Forum forums.

You are currently viewing our boards as a guest which gives you limited access to view most discussions and access our other features.
Only registered members may post questions, contact other members or search our database of over 8 million posts.

Registration is fast, simple and absolutely free so please - Click to REGISTER!

If you have any problems with the registration process or your account login, please contact contact us .

Go Back   GSM-Forum > Product Support Sections > Hard/Software Products (official support) > GSMServer Products > Smart-Clip 2

Reply
 
LinkBack Thread Tools Display Modes
Old 08-07-2014, 13:54   #1 (permalink)
Freak Poster
 
Join Date: Jun 2005
Location: Brazil
Age: 37
Posts: 205
Member: 154995
Status: Offline
Thanks Meter: 13
EX117 Same IMEI


Hi,

I had a EX117 with user code. I tryied unlock, read user code, but nothing worked. Tryied to do backup of calibration, but not worked as well, only failed in the process. So, I did the format FFS without backup.
The user code was reseted, but the phone was with SIM blocked.
After unlock phone show same IMEI in the screen.
I tryied re-write the 3 IMEIs, but only first IMEI was wrote, and I have "same IMEI" and no signal again.

Could you help me please?

Thanks.
  Reply With Quote
Old 08-09-2014, 08:23   #2 (permalink)
Product Supporter
 
GSM_Support's Avatar
 
Join Date: Feb 2005
Location: GSMserver Team
Posts: 36,981
Member: 121052
Status: Offline
Sonork: 100.107126
Thanks Meter: 80,766
@ fernandesx,

in order to help you we need to see operational logs from performed operations. Please show them.


Best Regards
GSMServer team



  Reply With Quote
Old 08-11-2014, 15:49   #3 (permalink)
Freak Poster
 
Join Date: Jun 2005
Location: Brazil
Age: 37
Posts: 205
Member: 154995
Status: Offline
Thanks Meter: 13
2965xxxxx Smart-Clip 2 dongle 1.03, Initializing...OK
--- 2014-08-05 22:33:27 ---
Smart-Clip 2 1.03.02 MTK: Direct unlock
USB Serial Port (COM8), Provider: FTDI, Driver ver.: 2.8.8.0, Date: 15/11/2010, FTDIBUS\COMPORT&VID_0403&PID_6001
Baud rate: 19200
Release "Power on" button!
Baseband Processor: MT6235, HW Rev. C.00, SW Rev. A.01
Serial number: 909E614BCBAF77876E06190F65220885
Testing external RAM...64 Mb
Detecting flash...NAND, ID: 00AD00A1-00000015, manufacturer: Hynix
Flash size: 128 Mb, page size: 2048
File system: 78 Mb @ 03200000
Firmware: A8265T_PCB01_GPRS_MT6235B_S01.SQMN3S_G_07_0E_00RPT
Hardware IMEI: 352511053571246
Mounting system disk...#1
Security area saved to "d:\users\f57715a\Documents\Smart-Clip 2\security backup\352511053571246_A8265T_PCB01_GPRS_MT6235B_S 01_SQMN3S_G_07_0E_00RPT.skb"
Unlocking phone...Done
--- 2014-08-05 22:35:03 ---
Smart-Clip 2 1.03.02 MTK: Get phone code
USB Serial Port (COM8), Provider: FTDI, Driver ver.: 2.8.8.0, Date: 15/11/2010, FTDIBUS\COMPORT&VID_0403&PID_6001
Baud rate: 19200
Release "Power on" button!
Baseband Processor: MT6235, HW Rev. C.00, SW Rev. A.01
Serial number: 909E614BCBAF77876E06190F65220885
Testing external RAM...64 Mb
Detecting flash...NAND, ID: 00AD00A1-00000015, manufacturer: Hynix
Flash size: 128 Mb, page size: 2048
File system: 78 Mb @ 03200000
Firmware: A8265T_PCB01_GPRS_MT6235B_S01.SQMN3S_G_07_0E_00RPT
Hardware IMEI: 352511053571246
Mounting system disk...#1
Reading phone code...Not found
--- 2014-08-05 22:35:59 ---
Smart-Clip 2 1.03.02 MTK: Format FFS
USB Serial Port (COM8), Provider: FTDI, Driver ver.: 2.8.8.0, Date: 15/11/2010, FTDIBUS\COMPORT&VID_0403&PID_6001
Baud rate: 19200
Release "Power on" button!
Baseband Processor: MT6235, HW Rev. C.00, SW Rev. A.01
Serial number: 909E614BCBAF77876E06190F65220885
Testing external RAM...64 Mb
Detecting flash...NAND, ID: 00AD00A1-00000015, manufacturer: Hynix
Flash size: 128 Mb, page size: 2048
File system: 78 Mb @ 03200000
Firmware: A8265T_PCB01_GPRS_MT6235B_S01.SQMN3S_G_07_0E_00RPT
Hardware IMEI: 352511053571246
Formatting FFS might affect calibration data. Press "Yes" if you made calibration backup. [NO]
Cancelled
--- 2014-08-05 22:36:47 ---
Smart-Clip 2 1.03.02 MTK: Backup calibration data
USB Serial Port (COM8), Provider: FTDI, Driver ver.: 2.8.8.0, Date: 15/11/2010, FTDIBUS\COMPORT&VID_0403&PID_6001
Baud rate: 19200
Release "Power on" button!
Baseband Processor: MT6235, HW Rev. C.00, SW Rev. A.01
Serial number: 909E614BCBAF77876E06190F65220885
Testing external RAM...64 Mb
Detecting flash...NAND, ID: 00AD00A1-00000015, manufacturer: Hynix
Flash size: 128 Mb, page size: 2048
File system: 78 Mb @ 03200000
Firmware: A8265T_PCB01_GPRS_MT6235B_S01.SQMN3S_G_07_0E_00RPT
Hardware IMEI: 352511053571246
Mounting system disk...#1
Reading flash: NVRAM/CALIBRAT/SE02A001...Failed to decrypt phone data
2965xxxxx Smart-Clip 2 dongle 1.03, Initializing...OK
--- 2014-08-05 22:39:43 ---
Smart-Clip 2 1.03.02 MTK: Backup calibration data
USB Serial Port (COM8), Provider: FTDI, Driver ver.: 2.8.8.0, Date: 15/11/2010, FTDIBUS\COMPORT&VID_0403&PID_6001
Baud rate: 19200
Release "Power on" button!
Baseband Processor: MT6235, HW Rev. C.00, SW Rev. A.01
Serial number: 909E614BCBAF77876E06190F65220885
Testing external RAM...64 Mb
Detecting flash...NAND, ID: 00AD00A1-00000015, manufacturer: Hynix
Flash size: 128 Mb, page size: 2048
File system: 78 Mb @ 03200000
Firmware: A8265T_PCB01_GPRS_MT6235B_S01.SQMN3S_G_07_0E_00RPT
Hardware IMEI: 352511053571246
Mounting system disk...#1
Reading flash: NVRAM/CALIBRAT/SE02A001...Failed to decrypt phone data
--- 2014-08-05 22:40:42 ---
Smart-Clip 2 1.03.02 MTK: Format FFS
USB Serial Port (COM8), Provider: FTDI, Driver ver.: 2.8.8.0, Date: 15/11/2010, FTDIBUS\COMPORT&VID_0403&PID_6001
Baud rate: 19200
Release "Power on" button!
Baseband Processor: MT6235, HW Rev. C.00, SW Rev. A.01
Serial number: 909E614BCBAF77876E06190F65220885
Testing external RAM...64 Mb
Detecting flash...NAND, ID: 00AD00A1-00000015, manufacturer: Hynix
Flash size: 128 Mb, page size: 2048
File system: 78 Mb @ 03200000
Firmware: A8265T_PCB01_GPRS_MT6235B_S01.SQMN3S_G_07_0E_00RPT
Hardware IMEI: 352511053571246
Formatting FFS might affect calibration data. Press "Yes" if you made calibration backup. [YES]
Done
--- 2014-08-05 22:42:26 ---
Smart-Clip 2 1.03.02 MTK: Direct unlock
USB Serial Port (COM8), Provider: FTDI, Driver ver.: 2.8.8.0, Date: 15/11/2010, FTDIBUS\COMPORT&VID_0403&PID_6001
Baud rate: 19200
Release "Power on" button!
Baseband Processor: MT6235, HW Rev. C.00, SW Rev. A.01
Serial number: 909E614BCBAF77876E06190F65220885
Testing external RAM...64 Mb
Detecting flash...NAND, ID: 00AD00A1-00000015, manufacturer: Hynix
Flash size: 128 Mb, page size: 2048
File system: 78 Mb @ 03200000
Firmware: A8265T_PCB01_GPRS_MT6235B_S01.SQMN3S_G_07_0E_00RPT
Hardware IMEI: 352511053571246
Mounting system disk...#1
Security area saved to "d:\users\f57715a\Documents\Smart-Clip 2\security backup\352511053571246_A8265T_PCB01_GPRS_MT6235B_S 01_SQMN3S_G_07_0E_00RPT (0).skb"
Unlocking phone...Done
--- 2014-08-05 22:47:39 ---
Smart-Clip 2 1.03.02 MTK: Repair IMEI
USB Serial Port (COM8), Provider: FTDI, Driver ver.: 2.8.8.0, Date: 15/11/2010, FTDIBUS\COMPORT&VID_0403&PID_6001
Baud rate: 19200
Release "Power on" button!
Baseband Processor: MT6235, HW Rev. C.00, SW Rev. A.01
Serial number: 909E614BCBAF77876E06190F65220885
Testing external RAM...64 Mb
Detecting flash...NAND, ID: 00AD00A1-00000015, manufacturer: Hynix
Flash size: 128 Mb, page size: 2048
File system: 78 Mb @ 03200000
Firmware: A8265T_PCB01_GPRS_MT6235B_S01.SQMN3S_G_07_0E_00RPT
Hardware IMEI: 352511053571246
Repaired IMEI: 352511053571246
Done
  Reply With Quote
Reply

Bookmarks


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


 



All times are GMT +1. The time now is 04:57.



Powered by Searchlight © 2024 Axivo Inc.
vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2024 DragonByte Technologies Ltd.
- GSM Hosting Ltd. - 1999-2023 -
Page generated in 0.15571 seconds with 8 queries

SEO by vBSEO