error resetting efs and writing cert
 

Using Version...1.0.0.0025
Selected Port VCP0 = COM3
Selected Model Samsung CDMA
Selected Task SAM CERT WRITE

ALL SAMSUNG CERT WRITE STARTED..

Searching Phone Please wait...

Phone Found Wait...
TEST MODE OK..
Model := SM-G920P
UNIQID := 04157DF4B91E6F0
Details. SM-G920P,G920P.02,G920PVPU3BOJ7,G920PVPU3BOJ7,G920PVP U3
Phone IMEI := 99***4******
Device Knox Warranty is := Void
MSL Address:= 0026041986
RESET EFS FIRST OR USE MSL CODE...

!!! FAIL !!!!
Total Time Take...00:00:20
Log Saved

Using Version...1.0.0.0025
Selected Model Samsung CDMA
Selected Task SAMSUNG RESET-EFS

Searching ADB device Please wait..

Device Detected...
model:= SM-G920P
Androids Version:= 5.1.1
Description Version:= zerofltespr-user 5.1.1 LMY47X G920PVPU3BOJ7 release-keys
Platform:= exynos5 [ samsungexynos7420 ] [ mdm2 ]
Baseband:= G920PVPU3BOJ7
VER:= G920PVPU3BOJ7/G920PSPT3BOJ7/G920PVPU3BOJ7/G920PVPU3BOJ7
Carrier := SPR_USA
Network Mode := 3
Simstatus:= ABSENT
IMEI-1 = null or empty
ANDROID-ID = 04157df4b91e6f07_0000011594
Detected su binary at /xbin
SU Version..2.65:SUPERSU
Device is Secure Rooted..uid=0
System Permission is Read/Write...

SAMSUNG RESET-EFS STARTED...
Reading Backup..

Unkown partition table. Please report to support.

!!! Fail !!!!
Restart Phone Manually before doing anything...
Total Time Take...00:00:05
Log Saved

Im unable to reset efs or write cert
i keep getting erros fail
what is the problem?
thanks

Hello
Read some helpfile from updatexx\helpfile\
Its look like your phone is damaged by other tool.
Use newqc unlock first via usb diag.
Then use MEID cert write via uart.

Searching phone...

Build...MPSS.BO.2.0.1.c3.5-00112-

Device Detected...
model:= SM-G920P
Androids Version:= 5.1.1
Description Version:= zerofltespr-user 5.1.1 LMY47X G920PVPU3BOJ7 release-keys
Platform:= exynos5 [ samsungexynos7420 ] [ mdm2 ]
Baseband:= G920PVPU3BOJ7
VER:= G920PVPU3BOJ7/G920PSPT3BOJ7/G920PVPU3BOJ7/G920PVPU3BOJ7
Carrier := SPR_USA
Network Mode := 3
Simstatus:= ABSENT
IMEI-1 = null or empty
ANDROID-ID = 04157df4b91e6f07_0000111C81
Detected su binary at /xbin
SU Version..2.65:SUPERSU
Device is Secure Rooted..uid=0
System Permission is Read/Write...

SAMSUNG NEW-QC UNLOCK Started..
Sec Test Passed..
New BaseBand Unlock not supported...0

!!! Fail !!!!
Restart Phone if not auto...
Total Time Take...00:00:11
Log Saved

Using Version...1.0.0.0026
Selected Port VCP0 = COM3
Selected Model Samsung CDMA
Selected Task SAM CERT WRITE

ALL SAMSUNG CERT WRITE STARTED..

Searching Phone Please wait...

Phone Found Wait...
TEST MODE OK..
Model := SM-G920P
UNIQID := 04157DF4B91E6F0
Details. SM-G920P,G920P.02,G920PVPU3BOJ7,G920PVPU3BOJ7,G920PVP U3
Phone IMEI := 9************
error func 15 fail report to support..

!!! FAIL !!!!
Total Time Take...00:00:03
Log Saved

I was finally able to fix it flashing sboot through Z3x.

Hello
You are free to use what ever u want.

But if you want to use gcpro you have to use as advice by us to get perfect results.
You have to read basic helpfiles in updatexx\helpfiles\

Try to see difference between imeicert write and meid cert write.

Stanner you have been very helpful and I really appreciate your help. I however not an expert as many of the other users here on this forum and your tools required someone with more knowledge than what I have. I will learn more and more about it because I know for real that your tools is very advanced and always first of everything.
Thank you again