Sprint G955U Z3X fail GCPro did not XD

[vaevictus0321]

So i got in a Sprint G955U with 1AQJH I used G955U_SQU1AQD8_ENG_SPRINT_UNLOCK.tar and all I got was a boot loop, this was a few days before G955U_SQU2AQK2_ENG_SPRINT_UNLOCK came out I assume that works on 1AQJH. Anyway I ended up doing a full combo flash (COMBINATION_FA70_G955USQU1AQG) I got from Z3X and figured as long as I had the tool open I would do the unlock with it, long story short it failed tried using G935P and G930P as the model just to be sure and I got error both times. Went to GCPro and in a little less than a minute it was unlocked with no problems.

Video of the flashing, unlocking fails, and unlocking success.

[MFKilla]

Originally Posted by vaevictus0321

So i got in a Sprint G955U with 1AQJH I used G955U_SQU1AQD8_ENG_SPRINT_UNLOCK.tar and all I got was a boot loop, this was a few days before G955U_SQU2AQK2_ENG_SPRINT_UNLOCK came out I assume that works on 1AQJH. Anyway I ended up doing a full combo flash (COMBINATION_FA70_G955USQU1AQG) I got from Z3X and figured as long as I had the tool open I would do the unlock with it, long story short it failed tried using G935P and G930P as the model just to be sure and I got error both times. Went to GCPro and in a little less than a minute it was unlocked with no problems.

Video of the flashing, unlocking fails, and unlocking success.

you problem with z3x is old software. 29.6. Download 30.1 and its unlock good.

[el_venga]

bit1 can be unlocked with any box as far as i know. you just need engroot.

[tomelich]

any old tool works badly, it's always good to update tool

[vaevictus0321]

Originally Posted by MFKilla

you problem with z3x is old software. 29.6. Download 30.1 and its unlock good.

I had whatever the latest version of Z3X at time was since sometimes Z3X updates twice a day and it didnt work so i downgraded to 29.6 which is the last version i recalled doing a successful unlock of a Sprint G955U with and thats the one i recorded video of. Didnt feel like writing up the whole saga.

[vaevictus0321]

Originally Posted by el_venga

bit1 can be unlocked with any box as far as i know. you just need engroot.

Well aware of whats required and am not saying this is a worlds first or anything spectacular, just that I ran into a problem and that is how i solved it. I used the files provided by Z3X and GCPro (eng roots) and the only thing they did was cause a bootloop. Dont know why because i have unlocked several of these not 1AQJH but thats what happened so I used the full combo flash and I am sure you can figure out the rest.

[vaevictus0321]

Originally Posted by tomelich

any old tool works badly, it's always good to update tool

Thank you for illuminating me with your wisdom since I must have only started doing this a couple of days ago, I believe I covered your statement in my first response.