Hua box Successfully Unlocked <> Repaired <> Flashed Phones <> PLEASE POST HERe...

[Hua Supporter]

[Forwarded from shahin]
Prepairing Resources... OK
Searching For Phone [SAMSUNG USB PORT]... OK
Phone Found on COM25
Initialize Phone ... OK
Prepairing... OK
Reading PIT Data ...OK
Analizing PIT Entries... OK
Pit Entry Num: 32
Unocking FRP... OK
Resetting... OK
it take 4-5 Minute to Phone Reboot to Normal Mode.
to Finalize the process please Factory data reset Phone.
Goto Settings > Backup and reset > Factory data reset.

Operation Time: 00:00:45
[Forwarded from shahin]
j500f سرعت عمل خیلی خوبه عجب حالی داد

[Hua Supporter]

[Forwarded from ⓜⓞⓗⓐⓜⓐⓓ]
IMPORTANT NOTE: DON'T CONNECT MULTIPLE ANDROID DEVICE IN USB DEBUGGING MODE AT SAME TIME!
Waiting For Device... OK[WinUSB]
Device Status: [ONLINE]
Model : ALCATEL ONE TOUCH Fierce
Manufacturer : TCT
Serial No. : 4HMNGYM7FADE55US
BaseBand Version : MOLY.WR8.W1248.MD.WG.MP.V13.F1.P17, 2013/11/19 15:27
SW Version : M2BUPB0
Custom Version : vM2B-0
Android Version : 4.2.2
[JDQ39
]
Built Date : Wed Dec 4 18:51:24 CST 2013
Checking Root Permission... OK
Prepairing Exploit... OK
Prepairing... OK
Prepairing Exploit... OK
Uploading Exploit... OK..OK
Unlocking... OK
2016-24-11 - 01:33:07 :
Rebooting to Normal Mode... OK
Stopping ADB Service... OK
Operation Time: 00:01:15

[Hua Supporter]

[Forwarded from Erlan Tercero]
[ Photo ]
Unlock Haier L30 done

[Hua Supporter]

[Forwarded from Hunter Mobile ترمیم بوت ثبت نام دوره آموزشی farshad]
For Android 2.x.x:
1- Turn-on the Phone Goto 'Settings > Application > Development'
2- And Check 'Usb Debugging' Then Connect Usb Cable To Phone

For Android 4.x.x and Above:
1- Turn-on the Phone Goto 'General > About' Tap 7 times on Build Number'
2- Return to General Tab Tap on Developer Options
3- And Check 'Usb Debugging' ON Then Connect Usb Cable To Phone

IMPORTANT NOTE: DON'T CONNECT MULTIPLE ANDROID DEVICE IN USB DEBUGGING MODE AT SAME TIME!
Waiting For Device... OK[WinUSB]
Please Tap on 'OK' in 'Allow Usb Debugging;' Pop-up on Device Screen!
Device Status: [ONLINE]
Checking Root Permission... OK
Upload Resource... OK..OK
Enabling All Language... OK..OK..OK
Stopping ADB Service... OK
Operation Time: 00:01:27
اینم یدونه فارسی دیگه بی درد سر بیزی باکسروت سه سوت

[Hua Supporter]

A500h reset frp done by new method
Prepairing Resources... OK
Searching For Phone [SAMSUNG USB PORT]... OK
Phone Found on COM12
Initialize Phone ... OK
Prepairing... OK
Reading PIT Data ...OK
Analizing PIT Entries... OK
Pit Entry Num: 31
Unocking FRP... OK
Resetting... OK
it take 4-5 Minute to Phone Reboot to Normal Mode.
to Finalize the process please Factory data reset Phone.
Goto Settings > Backup and reset > Factory data reset.

Operation Time: 00:00:12

[djfran10]

Samsung SM-J510MN (Galaxy J5 2016) unlock FRP done.

LOG:

2016-31-12 - 16:42:18 : Prepairing Resources... OK
2016-31-12 - 16:42:21 : Searching For Phone [SAMSUNG USB PORT]... OK
2016-31-12 - 16:42:21 : Phone Found on COM6
2016-31-12 - 16:42:21 : Initialize Phone ... OK
2016-31-12 - 16:42:21 : Prepairing... OK
2016-31-12 - 16:42:22 : Reading PIT Data ...OK
2016-31-12 - 16:42:22 : Analizing PIT Entries... OK
2016-31-12 - 16:42:22 : Pit Entry Num: 32
2016-31-12 - 16:43:04 : Unocking FRP... OK
2016-31-12 - 16:43:04 : Resetting... OK
2016-31-12 - 16:43:04 : it take 4-5 Minute to Phone Reboot to Normal Mode.
2016-31-12 - 16:43:04 : to Finalize the process please Factory data reset Phone.
2016-31-12 - 16:43:04 : Goto Settings > Backup and reset > Factory data reset.
2016-31-12 - 16:43:04 :
2016-31-12 - 16:43:04 : Operation Time: 00:00:47

[djfran10]

Motorola XT1032 (Moto G) unlock and repair IMEI done.


LOGs:

IMEI

2016-20-12 - 20:22:27 : Searching for Device... OK
2016-20-12 - 20:22:27 : Prepairing Device on [COM79-Motorola QC Diag Port ]... OK
2016-20-12 - 20:22:28 : Waiting for Phone ACK... OK
2016-20-12 - 20:22:28 : Reading Phone Information ...
2016-20-12 - 20:22:28 : Build No : M8610B-AAAANAZM-1.0.8017
2016-20-12 - 20:22:28 : IMEI 1 : 000000000000000
2016-20-12 - 20:22:28 : IMEI 2 : 000000000000000
2016-20-12 - 20:22:28 : Bypassing Security... OK..OK
2016-20-12 - 20:22:29 : Writing IMEI... OK
2016-20-12 - 20:22:40 : Rebooting... OK
2016-20-12 - 20:22:40 : If Phone Not Restart Do it Manualy and Please Note: !!DONT REMOVE BATTERY!!
2016-20-12 - 20:22:40 : Operation Time: 00:00:13

Unlock

2016-20-12 - 20:19:58 : Searching for Device... OK
2016-20-12 - 20:19:58 : Prepairing Device on [COM79-Motorola QC Diag Port ]... OK
2016-20-12 - 20:19:59 : Waiting for Phone ACK... OK
2016-20-12 - 20:19:59 : Reading Phone Information ...
2016-20-12 - 20:19:59 : Build No : M8610B-AAAANAZM-1.0.8017
2016-20-12 - 20:19:59 : IMEI 1 : 322311052259040
2016-20-12 - 20:19:59 : IMEI 2 : 000000000000000
2016-20-12 - 20:19:59 : Bypassing Security... OK..OK
2016-20-12 - 20:20:00 : Unlocking... OK
2016-20-12 - 20:20:01 : Rebooting... OK
2016-20-12 - 20:20:01 : If Phone Not Restart Do it Manualy and Please Note: !!DONT REMOVE BATTERY!!
2016-20-12 - 20:20:01 : Operation Time: 00:00:02

[djfran10]

Unlock SM-J700M (Galaxy J7)

LOG:

Searching for Device... OK
Waiting for Phone ACK... Phone Found
Reading Data from phone...
Model : SM-J700
S/N : R28G93PMGM
IMEI : 35387807019893
Unlocking... OK..OK..OK
Resetting Phone... OK
Operation Time: 00:00:10

[djfran10]

BGH AXS II Unlock and IMEI repair done.

LOG:

2017-02-01 - 10:21:58 : Searching for Device... OK
2017-02-01 - 10:21:58 : Prepairing Device on [COM77-USB Diagnostics Port ]... OK
2017-02-01 - 10:21:58 : Waiting for Phone ACK... OK
2017-02-01 - 10:21:58 : Reading Phone Information ...
2017-02-01 - 10:21:58 : Build No : V320_Z2_ES_JSXPH1ID01H105
2017-02-01 - 10:21:58 : IMEI 1 : 66721XX217XXXX7
2017-02-01 - 10:21:58 : IMEI 2 : 000000000000000
2017-02-01 - 10:21:59 : Bypassing Security... OK..OK
2017-02-01 - 10:21:59 : Writing IMEI... OK
2017-02-01 - 10:21:59 : Rebooting... OK
2017-02-01 - 10:21:59 : If Phone Not Restart Do it Manualy and Please Note: !!DONT REMOVE BATTERY!!

[modchipx]

G900P Screen lock removal..



LOG

2017-04-01 - 10:39:39 : Waiting For Device... OK[WinUSB]
2017-04-01 - 10:39:40 : Device Status: [ONLINE]
2017-04-01 - 10:39:40 : Removing Locks... OK..OK
2017-04-01 - 10:39:41 : Rebooting to Normal Mode... OK
2017-04-01 - 10:39:41 : Stopping ADB Service... OK
2017-04-01 - 10:39:41 : Operation Time: 00:00:01

[Hua Supporter]

[Forwarded from ❥❥❥❥ღ《مسیح》ღ❥❥❥❥]
IMPORTANT NOTE: DON'T CONNECT MULTIPLE ANDROID DEVICE IN USB DEBUGGING MODE AT SAME TIME!
Waiting For Device... OK[WinAPI]
Device SN : 0123456789ABCDEF
Please Tap on 'OK' in 'Allow Usb Debugging;' Pop-up on Device Screen!
Device Status: [ONLINE]
Model : RIDGE
Manufacturer : WIKO
Serial No. : 0123456789ABCDEF
BaseBand Version : MOLY.WR8.W1315.MD.WG.MP.V34, 2015/01/08 11:46
SW Version : ALPS.KK1.MP1.V2.10
Custom Version : WIKO RIDGE Version 8
Android Version : 4.4.2
[KOT49H
]
Built Date : Mon Jun 8 22:11:46 CST 2015
Checking Root Permission... OK
Prepairing Exploit... OK
Uploading Exploit... OK..OK
Repairing IMEI 1...OK
Repairing IMEI 2...OK
Rebooting to Normal Mode... OK
Stopping ADB Service... OK
Operation Time: 00:00:03

[Forwarded from ❥❥❥❥ღ《مسیح》ღ❥❥❥❥]
IMPORTANT NOTE: DON'T CONNECT MULTIPLE ANDROID DEVICE IN USB DEBUGGING MODE AT SAME TIME!
Waiting For Device... OK[WinAPI]
Device SN : 0123456789ABCDEF
Please Tap on 'OK' in 'Allow Usb Debugging;' Pop-up on Device Screen!
Device Status: [ONLINE]
Model : RIDGE
Manufacturer : WIKO
Serial No. : 0123456789ABCDEF
BaseBand Version : MOLY.WR8.W1315.MD.WG.MP.V34, 2015/01/08 11:46
SW Version : ALPS.KK1.MP1.V2.10
Custom Version : WIKO RIDGE Version 8
Android Version : 4.4.2
[KOT49H
]
Built Date : Mon Jun 8 22:11:46 CST 2015
Checking Root Permission... OK
Prepairing... OK..OK..
OK..OK
Fixing IMEI...OK
Rebooting to Normal Mode... OK
Stopping ADB Service... OK
Operation Time: 00:00:18

[Hua Supporter]

[Forwarded from MAJID KHEIRKHAH]
فارسی سازی s2 کر از هوا IMPORTANT NOTE: DON'T CONNECT MULTIPLE ANDROID DEVICE IN USB DEBUGGING MODE AT SAME TIME!
Waiting For Device... OK[WinUSB]
Device Status: [ONLINE]
Checking Root Permission... OK
Upload Resource... OK..OK
Enabling All Language... OK..OK
Stopping ADB Service... OK
Operation Time: 00:01:08

[Hua Supporter]

[Forwarded from Hossein alidusti]
[ Photo ]
باز کردن قفل frp سامسونگ j7 h در ۲۳ثانیه ❤️مرسی هواااااا��������������

[Hua Supporter]

[Forwarded from ��Ⓜ️ehrdad]
Repair G730-U10 IMEI After Change EMMC By HUA��
For Android 2.x.x:
1- Turn-on the Phone Goto 'Settings > Application > Development'
2- And Check 'Usb Debugging' Then Connect Usb Cable To Phone

For Android 4.x.x and Above:
1- Turn-on the Phone Goto 'General > About' Tap 7 times on Build Number'
2- Return to General Tab Tap on Developer Options
3- And Check 'Usb Debugging' ON Then Connect Usb Cable To Phone

IMPORTANT NOTE: DON'T CONNECT MULTIPLE ANDROID DEVICE IN USB DEBUGGING MODE AT SAME TIME!
Waiting For Device... OK[WinUSB]
Device Status: [ONLINE]
Model : HUAWEI G730-U10
Manufacturer : HUAWEI
Serial No. : EUIVGUEACUWGVWOJ
BaseBand Version : MOLY.WR8.W1315.MD.WG.MP.V5.P14, 2014/03/18 20:32
SW Version : G730-U10 V100R001C00B116
Custom Version : 88
Android Version : 4.2.2
[HuaweiG730-U10
]
Built Date : Mon Jun 16 17:04:40 CST 2014
Checking Root Permission... OK
Prepairing Security... OK..OK..OK
Analizing Security... OK
Security Area Size: 36813 Bytes
Security Area Checksum: 0x5BA473C4 expected 0x5BA473C4
Security File OK
Prepairing IMEI(s)... OK
Repairing IMEI(s)... OK..OK..OK..OK
Rebooting to Normal Mode... OK
Stopping ADB Service... OK
Operation Time: 00:03:34

[Hua Supporter]

[Forwarded from Saeed ...]
Prepairing Resources... OK
Searching For Phone [SAMSUNG USB PORT]... OK
Phone Found on COM25
Initialize Phone ... OK
Prepairing... OK
Reading PIT Data ...OK
Analizing PIT Entries... OK
Pit Entry Num: 31
Unocking FRP... OK
Resetting... OK
it take 4-5 Minute to Phone Reboot to Normal Mode.
to Finalize the process please Factory data reset Phone.
Goto Settings > Backup and reset > Factory data reset.

Operation Time: 00:00:31
بازکردنfrp j200hدر31ثانیه .مرسی هوا مرسی سید❤️❤️❤️❤️