★★★★★ MFC Suite 4 in1 V4.2 Final is now available ! ( Update 2023-11-13)★★★★★

[.::Gsmdenis::.]

What's New ?

• To support some phone only have one local keyboard. (World first)

How to ?

• Just update MFC Dongle Via auto v2.3

You will get the logs like:

[info] > Entering boot mode ...
[info] connecting...
[data] > Device has firmware version 2.1
[data] > Serial number: 0x88888888
[warn] > Waiting for reconnect...
[info] > Erasing the memory ...
[info] > Starting to upload ..
[info] > Starting the user app ...
[done] OK

[.::Gsmdenis::.]

To All,

What's including MFC Dongle installer V1.1.5 CN Version?

• MFC Dongle Main Software 1.1.5 with Chinese language
• Related drivers

Full installer Versions:

• We encourage all new customers to use this installer, if you don't know how to install driver etc by separate. The downloaded version of the software is available now, You can using the MFCDL Tools V2.0 to get this full installer version.

[.::Gsmdenis::.]

We're proud to announce the release of MFC 1.1.6. This update adds new functionality to your MFC Dongle.

Changelogs for MFC Dongle V1.1.6 ?

• Added iOS 8.0 、 8.0.1 、8.0.2 、 8.1 to support
• Reported bugs fixed

How is work for this new version:

1. Open device and disconnect the battery and input related battery adaptor to the battery socket, then connect phone battery to the battery adaptor.
2. Connect external power to iPower adaptor. (can be max 5V2A good quality charger, minimum 1A power. you can also use 4v from a good power supply). We have tested using 5v while unlocking iPhone 4s and iPhone 5. but if you have a bad quality charger that will supply more than 5v we recommend you to use an 4v external power.
3. Connect the light sensor to iPower adaptor white socket and put on the Phone (usually at a corner of the phone screen where no messages are displayed during boot procedure. Also avoid the middle of the screen as it will display the light increase icon and this can stop the unlocking prematurely).
4. Connect the USB 3 in 1 charging USB cable to iPower adaptor USB slot
5. Connect the USB 3 in 1 charging USB cable related connector to phone
6. Programm the MFC with the appropriate code settings (Delay time is not relevant for this update as the timing is already automatic)
7. Insert MFC Dongle into the iPower Adaptor.
8. Insert micro usb cable chager to iPower adaptor(can be max 5V 2A good quality charger), Now the MFC LEDs will start blinking and the phone will power up automaticlly, Then connect MFC Dongle to 3 in 1 USB cable OTG port. Please do not connect MFC Dongle before any above steps as the unlocking process might not start correctly.

Upgrading to new Versions:

• We encourage all customers to upgrade to this latest version 1.1.6. The downloaded version of the software is available now, You can using the MFCDL Tools V2.0 to upgrading to latest version. Here you can Download SN Reader.

[.::Gsmdenis::.]

We're proud to announce the release of MFC 1.1.7. This update adds new functionality to your MFC Dongle.

Changelogs for MFC Dongle V1.1.7 ?

• Add iOS 8.0-8.1 Auto V2 delay option (New)

• Added delay time waiting for phone exit disabled mode (try again in xx minute) for IOS 8 V2
• Unlock code display on phone Screen function added for IOS 8 V2 (World first)
• Active Extra Alphabet function for IOS8 V2

• Improving Samsung unlock methods
• Rename Samsung option to be Samsung Android 4.x
• Connection status bugs fixed
• Other small reported bugs fixed

Upgrading to new Versions:

• We recommend all customers to upgrade to this latest version 1.1.7. The downloaded version of the software is available now, You can using the MFCDL Tools V2.0 to upgrading to latest version.You can also download from support page with valid membership.

[.::Gsmdenis::.]

We're proud to announce the release of MFC 1.1.8. This update adds new functionality to your MFC Dongle.

Changelogs for MFC Dongle V1.1.8 ?

• Add iOS 8.0-8.1 Auto V3 option (New)

• Solved communication bugs
• Improved sensor detection aglorithm
• Add Extra Alphabet function for IOS8 V3

• Other small reported bugs fixed

Upgrading to new Versions:

• We recommend all customers to upgrade to this latest version 1.1.8. The downloaded version of the software is available now, You can using the MFCDL Tools V2.0 to upgrading to latest version.You can also download from support page with valid membership.

[.::Gsmdenis::.]

We're proud to announce the release of MFC 1.1.9. This update adds new functionality to your MFC Dongle.

Changelogs for MFC Dongle V1.1.9 ?

• Add iDevice iOS Version identifying function for free (New)
• Other small reported bugs fixed

Upgrading to new Versions:

• We recommend all customers to upgrade to this latest version 1.1.9. The downloaded version of the software is available now, You can using the MFCDL Tools V2.0 to upgrading to latest version.You can also download from support page with valid membership.

[.::Gsmdenis::.]

We're proud to announce the release of MFC 1.2.0. This update adds new functionality to your MFC Dongle.

Changelogs for MFC Dongle V1.2.0 ?

• Add iOS 8.0-8.1 Auto V4 (New)

• Added unlock function if xx message appears on the device’s Lock screen (World first)
• "Try again in 23 million minutes" bugs fixed

• Fix some IOS Version detection Bugs
• Update "Read iDvice" function to detect out more data (Beta version)(Free)
• IOS 8.0-8.1 Auto V1 & iOS 8.0-8.1 Auto V2 delay Removed
• iOS 7.1.1 calling & iOS 7.1.2 manual options Removed
• iOS 7.1.2 auto v2.2 Rename to iOS 7 auto v2.2
• iOS 7.1.2 auto v2.3 brightness Rename to iOS 7 auto v2.3 brightness
• Other small reported bugs fixed

Upgrading to new Versions:

• We recommend all customers to upgrade to this latest version 1.2.0. The downloaded version of the software is available now, You can using the MFCDL Tools V2.0 to upgrading to latest version.You can also download from support page with valid membership.

[.::Gsmdenis::.]

We're Very proud to announce the release of MFC 1.2.1. This update adds new functionality to your MFC Dongle.

Changelogs for MFC Dongle V1.2.1 ?

• Add iOS 8.0-8.1 Auto V5 (World first New Solution)
• Add iOS 8.0-8.1 Auto V5 TEST (Learning mode)
• Other small reported bugs fixed

Upgrading to new Versions:

• We recommend all customers to upgrade to this latest version 1.2.1. The downloaded version of the software is available now, You can download from support page with valid membership.

[.::Gsmdenis::.]

We're Very proud to announce the release of MFC 1.2.2. This update adds new functionality to your MFC Dongle.

Changelogs for MFC Dongle V1.2.2 ?

• Add iOS 8.0-8.1 Auto V6 (World first New Solution Turbo Mode)
  • Can Auto Detect Passcode Attempted
  • Add new algorithm Auto adjust unlock speed (Per/Reboot input code 1 ~ 5 Times)

• Add iOS 8.0-8.1 Auto V6 TEST (Learning mode)

• Other small reported bugs fixed

Upgrading to new Versions:

• We recommend all customers to upgrade to this latest version 1.2.2. The downloaded version of the software is available now, You can download from support page with valid membership.

[.::Gsmdenis::.]

What's New ?

• The Turbo Mode algorithm improved

How to ?

• Just update MFC Dongle Via Auto v6 If you unlock IOS8

[.::Gsmdenis::.]

We're Very proud to announce the release of MFC 1.2.3. This update adds new functionality to your MFC Dongle.

Changelogs for MFC Dongle V1.2.3 ?

• Add iOS 7.x V2.2 2015-4-19
  • Enable the Alphabet function

• Add iDevice Tools
  • Update / Restore /Download IPSW Function Added
  • SetMode in bata (Normal/DFU/Recovery/Restore)

• Add iPower Test Function
• Add MFC Tools
  • Read S/N function Added

• MFC software interface changed
• Other small reported bugs fixed

Upgrading to new Versions:

• We recommend all customers to upgrade to this latest version 1.2.3. The downloaded version of the software is available now, You can download from support page with valid membership.

[.::Gsmdenis::.]

We're Very happy to announce the release of MFC Dongle Version 1.2.5. While most of New functions adds and some bug fixes in the software.


Changelogs for MFC Dongle V1.2.5 ?


MacBook Changelogs:

• Add "EFI Boot Mode v2" option (New)
  • Add support different character Keyboard (World First)
  • Add Black Background Device unlock supported (World First)
  • Add Old & New Sensors Working supported
  • Add the "Alphabet" function
  • Add "Clear" memory logs function

iDevice Changelogs:

• iDevice iOS 7.x :
  • Add "iOS 7 auto V2.4" option (New)
    • Add light sensor connection status checks
    • The "Most Used 20 codes" function changed (1004 issue)
• iDevice iOS 8.x :
  • Add "iOS 8-8.1 auto V7" option (New)
    • Add Delay waiting Phone to charge function for each 50 reboots (World First)
    • Add light sensor connection status checks function
    • Add POWER/HOME button connection status checks function

iDevice Tools Changelogs:

• Add Read iDevice Full Information (IMEI & Serial) (World First)
• Graphical User Interface response time bugs fixed

MFC Tools Changelogs:

• Add Customize Calculator to set up the correct delay time for "iOS 8-8.1 auto V7" (World First)

Others Changelogs:

• Fixed bugs on Windows XP
• Some settings bugs fixed
• Other small reported bugs fixed

Upgrading to new Versions:

• We recommend all customers to upgrade to this latest version 1.2.5. The downloaded version of the software is available now, You can download from support page with valid membership.

[.::Gsmdenis::.]

We're Very happy to announce the release of MFC Dongle Version 1.2.6 . While most of New functions adds and some bug fixes in the software.


Changelogs for MFC Dongle V1.2.6 ?



iDevice Changelogs:

• iDevice iOS 8.x :
  • "iOS 8-8.1 auto V7" option (Detection Value Display on Phone Screen)
    • Add "Stripes Pattern" Use to Put MFC light Sensor (World first)
    • Add Light Sensor Current Detected Status Value "L"
    • Add MFC LEDs Activating Fast Blinking Mode Function After Code Found
    • Change Phone Communication Current Detected Status Value "S"
    • Change Phone Current Detected Code Value "Code"
    • Screen Message display time Improved
    • V7 Firmware updated on Server

iDevice Tools Changelogs:

• Add User /System Applications Read Function
• Add User /System Applications Update Function
• Add User /System Applications Install Function
• Add User /System Applications Uninstall Function
• Add One button Restart iDevice Function
• Add One button ShutDown iDevice Function
• Add One button Read iDevice Diagnostics info Function
• Add One button Read iDevice Time info Function
• Add One button Sync iDevice Time Function
• Add One button Set iDevice Time Function (Beta)
• And More....

MFC Tools Changelogs:

• Add useful /Help Link

Upgrading to new Versions:

• We recommend all customers to upgrade to this latest version 1.2.6. The downloaded version of the software is available now, You can download from support page with valid membership.

[.::Gsmdenis::.]

We're Very happy to announce the release of MFC Dongle Version 1.2.7 . While most of New functions adds and some bug fixes in the software.


Changelogs for MFC Dongle V1.2.7 ?


iDevice Tools Changelogs:

• Read iDevice function improved
• Flash function for new iOS Device improved
• iDevice Tools GUI bugs fixed
• Add Activate / Deactive function
• Add Syslogs Debug function

Jailbreak Changelogs:

• Automatic identify Jailbreak iDevice
• Support All iOS8 (8.0-8.4) Jailbroken iDeivce
• Support All iOS8 (8.0-8.4) disabled Jailbroken iDeivce unlock
• Support unlocking mutli Jailbroken iDeivces in same time
• Easy to use - just need one button "Find Code" press
• Unlocking Jailbroken iDeivces no need disassemble
• Unlock using original data cable
• Unlock Code direct shown on iDevice Screen

Upgrading to new Versions:

• We recommend all customers to upgrade to this latest version 1.2.7. The downloaded version of the software is available now, You can download from support page with valid membership.

[.::Gsmdenis::.]

To All,

What's including MFC Dongle installer V1.2.7 ?

• MFC Dongle Main Software 1.2.7
• Related drivers etc

Full installer Versions:

• We encourage all new customers to use this installer, if you don't know how to install driver etc by separate. The downloaded version of the software is available now.