Xolo Q900s Plus flashing procedure for users-

[ishtiyaque_24]

[teletalk]

i have same problem in xolo q900s plus phone is hang on logo condition and connect and disconnect automatically so flash tool gives error driver is ok connection is ok but disconnect automatic

[amit kanpur]

if error in flashing in latest file ..repalce only driver

[teletalk]

which driver bro ?? because i use qualcomm usb downloader driver..

[PASSIONATE_BOYS]

Originally Posted by teletalk

which driver bro ?? because i use qualcomm usb downloader driver..

Hello,
Follow procedure posted in 1st post of this thread.
- Now remove battery from phone, press both volume up+down keys
together and connect usb cable to phone WITHOUT BATTERY
Install driver from here- Drivers(2)

Br.

[teletalk]

hello i try to flashing as you say but every time flashing failed and usb driver is installed as you given but no success

[PASSIONATE_BOYS]

Originally Posted by teletalk

hello i try to flashing as you say but every time flashing failed and usb driver is installed as you given but no success

Use latest version firmware.

Br.

[teletalk]

Already try with lataest file sir...but any other way to flash this model ?? Like a fastboot mode (fastboot rom) or any other tool to flash qualcomm models and i try with some other tools which is made for flashing ...for specially qualcomm cpu phones
after all i try 500 times to flash with smart phone upgrade tool but only one time i got success but flashing fail at 99% and than its fail at 1% every time now..
Lets see whats happen...

[bhupenderk]

got success in least flash file

[Jaan47]

Need Rivo Phantom PZ8 QUALCOMM msm 8610 Driver.

[Jaan47]

[vivekphl]

Originally Posted by PASSIONATE_BOYS

Hello,
Here is guide on how to flash/upgrade Xolo Q900s+ step by step-
File and flasher download from here- Welcome to the ./downloads/Xolo/Xolo Q900s Plus/ folder of GsmHosting support area

Here is procedure-
- Open Smart Phone Upgrade Tool
- Click on Browse button and browse to firmware folder
- Select rawprogram0_BLANK_GPT file
- Now remove battery from phone, press both volume up+down keys
together and connect usb cable to phone WITHOUT BATTERY
- Install driver, after installation you can see port in device manager
Qualcomm HS-USB DLoader 9008
- Press Refresh Port if phone is not detected by SPUT automatically
- Press Start button in SPUT and wait for sometime
-After successfull flashing you will see Downloaded successfully! written
in status bar in green colour.
Flashing done!!

Actually in original flashing document flashing procedure is given different, so I thought to share this easy method.

Br.

br q900s and q900s+ is different or same . if q900s is update win os can i change its andriod . when i flesh its not creat port . in divice maneger show UEFI USB simple Windows Phone I/O Protocol. plz gide me

[rahul_rocks3]

can anybody give usb driver

[sb99sameerkhan]

dear flashing fail help

[mohd nazar]

port showing in device manager but not showing in tool