GSM Shop
GSM-Forum  

Welcome to the GSM-Forum forums.

You are currently viewing our boards as a guest which gives you limited access to view most discussions and access our other features.
Only registered members may post questions, contact other members or search our database of over 8 million posts.

Registration is fast, simple and absolutely free so please - Click to REGISTER!

If you have any problems with the registration process or your account login, please contact contact us .

Go Back   GSM-Forum > GSM & CDMA Phones / Tablets Software & Hardware Area > Various > Q-Mobile

Reply
 
LinkBack Thread Tools Display Modes
Old 02-17-2010, 16:25   #1 (permalink)
Freak Poster
 
jumper-master's Avatar
 
Join Date: Dec 2007
Location: Pakistan
Posts: 181
Member: 641971
Status: Offline
Thanks Meter: 34
Do you want to repaire/Unlock Q-MOBILE ?


THIS THREAD IS SPEACIALLY FOR PAKISTANI TECHNICIANS.

Do you want to repair/Unlock Q-MOBILE ? yes it is possible with INFINITY BOX and any kind of chinese Repairing/unlocking boxes,I and my team (jumper-master,asif.arain)created its repair/unlock 1st in the world and worked successfully.
Now i share with you log reports of these type of phones.Try it and post your result with log report here.


E200

Action: read/check information
Model: Autodetect 6205-6227 NOR
Checking data, wait...
Phone should be Switched ON !
Connecting, wait...
Phone detected, wait...
Hardware version: MT6223, E05
Hardware version: TINNO23C_08A_GEMINI_HW
Software version: E200_PAKISTAN_PR1_R3
Software date: 2000.00.00
Barcode: Y2720924002810 10
imei-1: 355***********
imei-2: 355***********
imei-3: 355***********
Finished, time used: 9 sec
Remove/Install battery now !





Action: read/check information

COM12 [VCP0] selected
module v3.05
Device: Autodetect 6205-6227 NOR
Checking data, wait...
advanced flash detection enabled
Action: read/check information
====> Boot ...
Press and HOLD Power button now !
19200 fixed
Connecting, wait...
Initializing [6223:8A05:8A00]...
CPU: MT6223
high speed boot On
chip: 0011:96FA:000C
status: FF
boot packet size: 0400
Release Power button now !
Boot Done
====> Initialize ...
detecting chip #00 in region #00...
flash: 2088C4FFFFFFFF:2088C400000000
flash: ST Intel/Sharp ext [def 007Fx020000 0004x008000] 16Mb
detecting chip #01 in region #00...
flash: 2088C4FFFFFFFF:2088C400000000
flash: ST Intel/Sharp ext [def 007Fx020000 0004x008000] 16Mb
detecting chip #02 in region #00...
flash: 2088C4FFFFFFFF:2088C400000000
flash: ST Intel/Sharp ext [def 007Fx020000 0004x008000] 16Mb
detecting chip #03 in region #00...
flash: 2088C4FFFFFFFF:2088C400000000
flash: ST Intel/Sharp ext [def 007Fx020000 0004x008000] 16Mb
number of flash chip/regions detected: 04/01
Initialize Done
====> Set baud ...
115200
Set baud Done
====> Initialize bootcode ...
Initialize bootcode Done
====> Check firmware integrity ...
device parameters detection in progress...
detecting chip #00 in region #00...
flash: 2088C4FFFFFFFF:2088C400000000
flash: ST Intel/Sharp ext [def 007Fx020000 0004x008000] 16Mb
detecting chip #01 in region #00...
flash: 2088C4FFFFFFFF:2088C400000000
flash: ST Intel/Sharp ext [def 007Fx020000 0004x008000] 16Mb
it's time to stop: 2B0000EA18F09FE518F09FE518F09FE518F09FE518F09FE5
number of flash chip/regions detected: 01/01
total flash region size: 01000000
usb bootloader detect...
..
usb bootloader detect (phase #2)...
..
usb bootloader (chip) is absent
searching rom info...
search rom info finished
rom info structure: 2nd [standard] generation
TCL-ID is absent
rom info detection finished
====================
New firmware detected (v.3.05, database date: 11.01.2010):
TINNO23C_08A_GEMINI_PCB01_GPRS_MT6223P_S00.E200_PA KISTAN_PR1_R3_0.BIN

This firmware is missing in support area. If this phone is good and working:
- download latest software from support area and try again, probably this firmware already supported in latest software
- make "Read full flash" operation
- send flash backup files to support:
[email protected] or upload files to http://rapidshare.com or http://4shared.com
- include in your e-mail full text from phone back label (phone name etc.)
====================
rom info ver: 05
sw version: TINNO23C_08A_GEMINI_PCB01_GPRS_MT6223P_S00.E200_PA KISTAN_PR1_R3_0.BIN
project-id: E200_PAKISTAN_PR1_R3.0, 00000000
code offset: 00000000
ffs offset/size [01]: 00E00000/001F8000
rom info structure: 2nd [standard] generation
TCL-ID is absent
detecting ffs/eeprom area in 1 chip(s)...
standard ffs/eeprom offset detected: 00E00000
standard ffs/eeprom offset confirmed: 00E00000
detecting ffs/eeprom size...
ffs/eeprom size: 00200000
ffs/eeprom chip: 00
ffs/eeprom area: 00000000:00E00000-00FFFFFF
detecting ffs/eeprom structure pass 1...
.............................
detect standard ffs/eeprom location pass #1...
.................................................. ......
detect extended ffs/eeprom location pass #1...
.........................................
detect standard ffs/eeprom offset pass #1...
ffs/eeprom record offset detected
detect standard ffs/eeprom data...
ffs/eeprom record size detected
ffs/eeprom layout detection complete
ffs/eeprom detected ok: element #1
sec info (detailed) detection...
searching sec info#1...
.
search sec info#1 finished
detecting firmware version...
firmware version: TINNO23C_08A_GEMINI_PCB01_GPRS_MT6223P_S00.E200_PA KISTAN_PR1_R3_0.
detecting firmware build...
.........................................
firmware build: 200905111917
detecting product-id...
.................................................. ..............
done
detecting languages...
....................................
language parameters detected
detected languages: En Ar
sec info (detailed) detection...
searching sec info#1...
.
search sec info#1 finished
Finished, time used: 1 min 39 sec
Remove/Install battery now !





User lock code in (standard mode)

COM12 [VCP0] selected
module v3.05
Device: Autodetect 6205-6227 NOR
Checking data, wait...
advanced flash detection enabled
Action: "user code"
unlock method: standard
ffs/eeprom backup enabled, it may takes several minutes !
====> Boot ...
Press and HOLD Power button now !
19200 fixed
Connecting, wait...
Initializing [6223:8A05:8A00]...
CPU: MT6223
high speed boot On
chip: 0011:96FA:000C
status: FF
boot packet size: 0400
Release Power button now !
Boot Done
====> Initialize ...
detecting chip #00 in region #00...
flash: 2088C4FFFFFFFF:2088C400000000
flash: ST Intel/Sharp ext [def 007Fx020000 0004x008000] 16Mb
detecting chip #01 in region #00...
flash: 2088C4FFFFFFFF:2088C400000000
flash: ST Intel/Sharp ext [def 007Fx020000 0004x008000] 16Mb
detecting chip #02 in region #00...
flash: 2088C4FFFFFFFF:2088C400000000
flash: ST Intel/Sharp ext [def 007Fx020000 0004x008000] 16Mb
detecting chip #03 in region #00...
flash: 2088C4FFFFFFFF:2088C400000000
flash: ST Intel/Sharp ext [def 007Fx020000 0004x008000] 16Mb
number of flash chip/regions detected: 04/01
Initialize Done
====> Set baud ...
115200
Set baud Done
====> Initialize bootcode ...
Initialize bootcode Done
====> Check firmware integrity ...
device parameters detection in progress...
detecting chip #00 in region #00...
flash: 2088C4FFFFFFFF:2088C400000000
flash: ST Intel/Sharp ext [def 007Fx020000 0004x008000] 16Mb
detecting chip #01 in region #00...
flash: 2088C4FFFFFFFF:2088C400000000
flash: ST Intel/Sharp ext [def 007Fx020000 0004x008000] 16Mb
it's time to stop: 2B0000EA18F09FE518F09FE518F09FE518F09FE518F09FE5
number of flash chip/regions detected: 01/01
total flash region size: 01000000
usb bootloader detect...
..
usb bootloader detect (phase #2)...
..
usb bootloader (chip) is absent
searching rom info...
search rom info finished
rom info structure: 2nd [standard] generation
TCL-ID is absent
rom info detection finished
====================
New firmware detected (v.3.05, database date: 11.01.2010):
TINNO23C_08A_GEMINI_PCB01_GPRS_MT6223P_S00.E200_PA KISTAN_PR1_R3_0.BIN
This firmware is missing in support area. If this phone is good and working:
- download latest software from support area and try again, probably this firmware already supported in latest software
- make "Read full flash" operation
- send flash backup files to support: [email protected] or upload files to http://rapidshare.com or http://4shared.com
- include in your e-mail full text from phone back label (phone name etc.)
====================
rom info ver: 05
sw version: TINNO23C_08A_GEMINI_PCB01_GPRS_MT6223P_S00.E200_PA KISTAN_PR1_R3_0.BIN
project-id: E200_PAKISTAN_PR1_R3.0, 00000000
code offset: 00000000
ffs offset/size [01]: 00E00000/001F8000
rom info structure: 2nd [standard] generation
TCL-ID is absent
detecting ffs/eeprom area in 1 chip(s)...
standard ffs/eeprom offset detected: 00E00000
standard ffs/eeprom offset confirmed: 00E00000
detecting ffs/eeprom size...
ffs/eeprom size: 00200000
ffs/eeprom chip: 00
ffs/eeprom area: 00000000:00E00000-00FFFFFF
detecting startup code area #2...
.................................................. .................................................. .................................................. .................................................. .................................................. ......
startup code area #2 is absent
detecting ffs/eeprom structure pass 1...
.............................
detect standard ffs/eeprom location pass #1...
.................................................. ......
detect extended ffs/eeprom location pass #1...
.........................................
detect standard ffs/eeprom offset pass #1...
ffs/eeprom record offset detected
detect standard ffs/eeprom data...
ffs/eeprom record size detected
ffs/eeprom layout detection complete
ffs/eeprom detected ok: element #1
sec info (detailed) detection...
searching sec info#1...
.
search sec info#1 finished
Check firmware integrity Done
====> Check firmware content ...
Check firmware content Done
====> Backup required data ...
reading: TINNO23C_08A_GEMINI_PCB01_GPRS_MT6223P_S00.E200_PA KISTAN_PR1_R3_0__ffs...
file saved: C:\Program Files\InfinityBox\ChineseMiracle\TINNO23C_08A_GEMI NI_PCB01_GPRS_MT6223P_S00.E200_PAKISTAN_PR1_R3_0__ ffs_20100125-143421.B0E.bin
flash: 2088C4FFFFFFFF:2088C400000000
Backup required data Done
====> Patch required data ...
detection procedure, wait...
detection procedure completed
Patch required data Done
====> Special operation ...
Special operation Done
====> Write ...
flash: 2088C4FFFFFFFF:2088C400000000
Write: ffs
Write Done
====> Finalization ...
Finalization Done
Finished, time used: 8 min 18 sec
Remove/Install battery now !





E400


GENERAL INFORMATION


Action: read/check information
Model: Autodetect 6205-6227 NOR
Checking data, wait...
Phone should be Switched ON !
Connecting, wait...
Phone detected, wait...
Hardware version: MT6225, E05
Hardware version: TINNO25_GEMINI_HW
Software version: E400-PK.FM.V7"
Software date: 2006.06.14
Barcode: L2710922009039 10
imei-1: 3578**********
imei-2: 3578**********
imei-3: 3578**********
Finished, time used: 6 sec
Remove/Install battery now !



DETAILED INFORMATION



COM4 [VCP0] selected
module v3.05
Device: Autodetect 6205-6227 NOR
Checking data, wait...
advanced flash detection enabled
Action: read/check information
====> Boot ...
Press and HOLD Power button now !
19200 fixed
Connecting, wait...
Initializing [6225:8A05:8A00]...
CPU: MT6225
high speed boot On
chip: 0001:7E03:0003
status: FF
boot packet size: 0400
Release Power button now !
Boot Done
====> Initialize ...
detecting chip #00 in region #00...
flash: 98000300000001:18E59F00000000
flash: Toshiba AMD/Fujitsu std [T 0008x004000 007Fx020000] 16Mb
detecting chip #01 in region #00...
flash: 98000300000001:18E59F00000000
flash: Toshiba AMD/Fujitsu std [T 0008x004000 007Fx020000] 16Mb
detecting chip #02 in region #00...
flash: 98000300000001:18E59F00000000
flash: Toshiba AMD/Fujitsu std [T 0008x004000 007Fx020000] 16Mb
detecting chip #03 in region #00...
flash: 98000300000001:18E59F00000000
flash: Toshiba AMD/Fujitsu std [T 0008x004000 007Fx020000] 16Mb
number of flash chip/regions detected: 04/01
Initialize Done
====> Set baud ...
115200
Set baud Done
====> Initialize bootcode ...
Initialize bootcode Done
====> Check firmware integrity ...
device parameters detection in progress...
detecting chip #00 in region #00...
flash: 98000300000001:18E59F00000000
flash: Toshiba AMD/Fujitsu std [T 0008x004000 007Fx020000] 16Mb
detecting chip #01 in region #00...
flash: 98000300000001:18E59F00000000
flash: Toshiba AMD/Fujitsu std [T 0008x004000 007Fx020000] 16Mb
it's time to stop: 18F09FE518F09FE518F09FE518F09FE518F09FE518F09FE5
number of flash chip/regions detected: 01/01
total flash region size: 01000000
usb bootloader detect...
..
usb bootloader detect (phase #2)...
..
usb bootloader (chip) is absent
searching rom info...
search rom info finished
rom info structure: 2nd [standard] generation
TCL-ID is absent
rom info detection finished
====================
New firmware detected (v.3.05, database date: 11.01.2010):
TINNO25_GEMINI_PCB01_GPRS_MT6225_S00.E400-PK_FM_V7.BIN
This firmware is missing in support area. If this phone is good and working:
- download latest software from support area and try again, probably this firmware already supported in latest software
- make "Read full flash" operation
- send flash backup files to support: [email protected] or upload files to http://rapidshare.com or http://4shared.com
- include in your e-mail full text from phone back label (phone name etc.)
====================
rom info ver: 04
sw version: TINNO25_GEMINI_PCB01_GPRS_MT6225_S00.E400-PK_FM_V7.BIN
project-id: E400-PK.FM.V7, 00000000
code offset: 00000000
ffs offset/size [01]: 00E00000/001F0000
rom info structure: 2nd [standard] generation
TCL-ID is absent
detecting ffs/eeprom area in 1 chip(s)...
standard ffs/eeprom offset detected: 00E00000
standard ffs/eeprom offset confirmed: 00E00000
detecting ffs/eeprom size...
ffs/eeprom size: 00200000
ffs/eeprom chip: 00
ffs/eeprom area: 00000000:00E00000-00FFFFFF
detecting ffs/eeprom structure pass 1...
.......................
detect standard ffs/eeprom location pass #1...
.................................................
detect standard ffs/eeprom offset pass #1...
ffs/eeprom record offset detected
detect standard ffs/eeprom data...
ffs/eeprom record size detected
ffs/eeprom layout detection complete
ffs/eeprom detected ok: element #1
sec info (detailed) detection...
searching sec info#1...
.
search sec info#1 finished
detecting firmware version...
firmware version: TINNO25_GEMINI_PCB01_GPRS_MT6225_S00.E400-PK_FM_V7.BIN
detecting firmware build...
.................................................
firmware build: 200905262227
detecting product-id...
.................................................. ..............
done
detecting languages...
.............................................
language parameters detected
detected languages: En Ar
sec info (detailed) detection...
searching sec info#1...
.
search sec info#1 finished
Finished, time used: 2 min 20 sec
Remove/Install battery now !


FORMAT IN SAFE MODE




COM4 [VCP0] selected
module v3.05
Action: reset settings ("format ffs")
Model: Autodetect 6205-6227 NOR
Checking data, wait...
Phone should be Switched OFF !
Press and HOLD Power button now !
19200 autodetect
Initializing [6225:8A05:8A00]...
CPU: MT6225
high speed boot On
chip: 0001:7E03:0003
status: FF
Connecting at 19200, wait...
Release Power button now !
Phone detected, wait...
Hardware: MT6225,E05
Date: 2006.06.14
Version: 1.0
Version: E400-PK.FM.V7
Version: TINNO25_GEMINI_HW
detecting structure #2...
5 11 done
67 byte(s) read
imei: 35783102101528
connection Ok
building list...
done
items to clear: 177
warning: wrong packet cs
warning: wrong packet cs
items cleared: 177 of 177
building list...
done
items remains: 0
Finished, time used: 32 sec
Remove/Install battery now !

REPAIR IMEI


IMEI 1
Action: "repair imei"
Model: Autodetect 6205-6227 NOR
Checking data, wait...
Phone should be Switched ON !
Connecting, wait...
Phone detected, wait...
imei-1: 357************
imei write method: mode-1
imei write channel: imei #1 for dual sim/mono CPU
new imei-1: 357************
verification Ok
Finished, time used: 5 sec
Remove/Install battery now !

2nd IMEI

Action: "repair imei"
Model: Autodetect 6205-6227 NOR
Checking data, wait...
Phone should be Switched ON !
Connecting, wait...
Phone detected, wait...
imei-2: 135790246811220
imei write method: mode-1
imei write channel: imei #2 for dual sim/mono CPU
new imei-2: 357************
verification Ok
Finished, time used: 3 sec
Remove/Install battery now !





IF YOU LIKE MY POST JUST HIT THANKS BUTTON

Last edited by jumper-master; 02-17-2010 at 16:35.
  Reply With Quote
The Following 3 Users Say Thank You to jumper-master For This Useful Post:
Show/Hide list of the thanked
Reply

Bookmarks

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
thread Thread Starter Forum Replies Last Post
Do you want to repair/Unlock Q-MOBILE ? jumper-master Infinity-Box 4 04-24-2012 10:55
Do you want to hear what people are saying around you? spycell Main Sales Section 4 06-07-2002 18:47
Do You Want To Unlock Your Eric Just Today ? Thomass Main Sales Section 0 05-30-2002 07:44
Do you want to do Mobile phone connector Trade in your country. YES>>>IN pcsos Main Sales Section 0 04-02-2002 12:41
Do you want to unlock Savvys??? X-Shadow Various 3 09-28-2000 08:00

 



All times are GMT +1. The time now is 08:21.



Powered by Searchlight © 2020 Axivo Inc.
vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2020 DragonByte Technologies Ltd.
- GSM Hosting Ltd. - 1999-2017 -
Page generated in 0.31795 seconds with 8 queries

SEO by vBSEO