GSM-Forum - Lenovo A788T firmware + Tool

GSM-Forum (https://forum.gsmhosting.com/vbb/)

- Lenovo (https://forum.gsmhosting.com/vbb/f958/)

- - Lenovo A788T firmware + Tool (https://forum.gsmhosting.com/vbb/f958/lenovo-a788t-firmware-tool-1947134/)

Lenovo A788T firmware + Tool

Lenovo A788T firmware + Tool

http://ecx.images-amazon.com/images/...rL._SX425_.jpg

Android 4.3
Quad Core 1.2GHz
Download

[10]Found an new device
[10]Getting type of Device
[4]Get type of device failed
[10]Get type of device failed

i got that error as phone is infected by virus

I found some links, take a try :

ONTIM Marvell MultiDL 1.3.0.61 AppOnly Latest - Flasher

A788t_S12002_140503_CN - China ROM

Instructions (translated, may have typo's...) :

Quote:

1. Install the from the driver folder (DrvInstaller for 32bit; DrvInstaller_x64 64)
2. Run the flasher ONTIM_Marvell_MultiDL.exe
3. In the window that opens, in the top left corner of the graph find the "System" and select "Config"
4. In the trail. window, in the "Blf File" tab, click the box with three dots (...)
5. In the search box, find "HELN_LTE_Nontrusted_eMMC_400MHZ_1GB.blf" file (located in LenovoA788t_S12002_140503 folder) and click "Save". As long as nothing else is doing. Do not close flasher ...
6. Disconnect battery on your phone and connect it to the PC via USB cable while holding the volume UP button. PC detect your phone and automatically install driver
7. Disconnect your phone from the PC and disconnect battery.
8. Re-connect the device to your PC using the USB cable while holding the volume keys "+" and hold
8. Return to the flasher. In the main window, press the F9 key. Starts flashing, release the "+"
9. We are waiting for the end of the flashing.
PS: If all goes well, at the end of the flashing, you will see a green bar, but if not then the red (try to do it all over again).

After flashing disconnect battery and run the phone. First run lasts approximately 5-10 minutes

Attention!!! The phone should be charged not less than 50%, and preferably 100%
Everything you do, you do at your own risk !!! No one except you for it is not responsible !!!

b.r.
Alex

Quote:

Originally Posted by Tabu43 (Post 12420233)

[10]Found an new device
[10]Getting type of Device
[4]Get type of device failed
[10]Get type of device failed

i got that error as phone is infected by virus

set driver 6.3.0.0 (non "hifei brench) and flash ok

Hi i got this error while flashing please help me

Code:

Waiting for connection...

[10]Found an new device

[10]Getting type of Device

[10]Open an BootLoader Device

[4]Get type of device successfully 

[10]Get type of device successfully 

[1]Initialization 

[10]

DownLoading file: C:\Users\Samsung\Downloads\Compressed\LenovoA788t_S12002_140503\ONTIM_Marvell_MultiDL_1.3.0.61_AppOnly\temp\FBF_Ntimheader.bin
 

[10]

FastDownload
 

[10]Download data finished

[10]

Completed DownLoad file: C:\Users\Samsung\Downloads\Compressed\LenovoA788t_S12002_140503\ONTIM_Marvell_MultiDL_1.3.0.61_AppOnly\temp\FBF_Ntimheader.bin
 

[10]Getting Version...

[10]

DownLoading file: C:\Users\Samsung\Downloads\Compressed\LenovoA788t_S12002_140503\ONTIM_Marvell_MultiDL_1.3.0.61_AppOnly\temp\FBF_h.bin
 

[10]

FastDownload
 

[10]Download data finished

[10]

Completed DownLoad file: C:\Users\Samsung\Downloads\Compressed\LenovoA788t_S12002_140503\ONTIM_Marvell_MultiDL_1.3.0.61_AppOnly\temp\FBF_h.bin
 

[10]Begin Burning flash 

[10]Platform is busy

[10]

WTPTP Error: SDMMC_CC_ERROR
 

[15]

WTPTP Error: SDMMC_CC_ERROR
 

[6]Image DownLoad Failed...

You should really start reading log, it already says where's the problem.

Quote:

[15]
WTPTP Error: SDMMC_CC_ERROR

Either you have sd card inserted in phone,
(And you should take it out before flashing),
Or eMMC/Nand flash memory is defective.
In second case, it's a hardware error,
And cant be solved by flashing.

B.r.
Alex

there is no memory card in my phone

Quote:

Originally Posted by Brka (Post 12652344)

You should really start reading log, it already says where's the problem.

Either you have sd card inserted in phone,
(And you should take it out before flashing),
Or eMMC/Nand flash memory is defective.
In second case, it's a hardware error,
And cant be solved by flashing.

B.r.
Alex

there is no memory card in my mobile phones......
my phone's problem is blinking always .......
should i change nand ????

Quote:

Originally Posted by sagarsewa@pkr (Post 12652686)

there is no memory card in my mobile phones......
my phone's problem is blinking always .......
should i change nand ????

Probably YES. But, again - no one guarantee that it will work 100%,
it also may have some other HW problem.

If you have spare time and compatible eMMC/Nand memory - change it,
try to reflash ... if still the same - don't waste too much time.

b.r.
Alex

Brka is always coming with correct solutions

Its proud having him hear , ;)

Phone had Chinese rom flashed with Europe - Brka Link Provided Phones work gr8... Thanks Brka

Just to mention - At point 6 where says disconnect battery need to be reconnect or reinstall, so flash with battery inside (mine case).

Quote:

Originally Posted by Formingus (Post 13090713)

You are always welcome my friend. I am glad that you fixed it.

Have a nice day.

b.r.
Alex

Please help hosan a1 marvel cpu firmware... phone hang first logo... recovery failed to format cache... fastboot -w not work

My pc is not detecting this phone.

Need Lenovo A788T firmware

Sir I need this file when open the link file doesnt exist can you give a new link ?

WBR

Quote:

Originally Posted by NKhan_Gsm (Post 14672031)

Sir I need this file when open the link file doesnt exist can you give a new link ?

WBR

Post #3. Both links working.

b.r.
Alex