lenovo tab e7 tb-7104f frp ?? Anyone can share DA for this model tb-7104f lenovo tab E7, many thanks |
Dear Friend, There Is Two Type Of DA Available. • For LTE Variant, Select DA_PL_LTE.bin • For Wi-Fi Variant, Select DA_PL_WIFI.bin |
its only wifi tablet, but where i can get this files?? |
|
Many thanks Done whit spflashtool and files |
Hello anyone have tb-7104i MT6580 file to remove frp? TIA |
Quote:
Yes .... Download : STOCK ROM (below) - Load DA file from unpacked archive, \DA Folder - Load authentication file from \DA folder - Go to Format tab in SPFT, tick validation and use MANUAL format. - Input start address and length : Start address : 0x1c3a0000 Length : 0x100000 - Connect powered off device to usb cable, wait for finish - FRP should be gone. If not, manually do factory reset from recovery. If, for some reason tablet don't boot after (or if you missed or wrogly entered start address), just reflash it with ROM file given in link below. Download ROM file : LENOVO TB-7104I_S000042_180908_ROW_SECURE p.s. If you have problem in booting, try another DA agent or hold vlume keys before insert usb cable on powered off device. b.r. Alex |
for lenovo tab tb-7104f (tab e7) to remove frp.. Input start address and length: Start address : 0x21000000 Length : 0x100000 |
TB-7104F firmware or working hard reset method needed Hi guys; I have TB-7104F,device has user pattern.I do vol+ power but it has just fastboot option.Can you please give working firmware link or hardware method? |
Quote:
b.r. Alex |
Hi, I have TB-7104F with MT8167 but I'm not able to root it, to create a custom recovery to flash the root. Someone can help me? After brikking my tablet I have flashed rom in post 4 (try it many times), but I'm not able to enter in the stock recovery and also if I flash auto created twrp recovery from stock it dosen't work. (normal boot and fastboot works) With volume up + power it goes to fastboot mode With volume down + power nothing appens With both volumes + power and then power when lenovo logo apears it go to a kind of recovery but without menu only a text: No command. Thankss |
Quote:
and when so (stock condition), there is bootchain vailidity check enabled, means - it check boot, recovery etc. for validity. To be able to use custom recovery, either bootloader must be unlocked, or must exist patched boot.img file to be flashed into device. So, try unlocking bootloader on stock rom, then flash custom recovery. b.r. Alex |
Hi, a kid gave me this tablet Lenovo TB7104F to repair, doesn't accept passkey, can't enter Recovery (vol+power). It only goes to fastboot and is stuck there. What is the best course of action to get it to factory reset mode? Do I flash the stock ROM (where do I get it, and which tools to use), or is there something else I could do? I'm not familiar with this tablet, but I can follow instructions. Any help much appreciated. Thanks! |
Right, I've just entered wrong passkey like 10 times and it wiped itself up. Did not check if the recovery/ hard reset meny is there or it's still stuck on fastboot, but at least it works. |
Lenovo Tab MT7104F FRP Issues Quote:
I have purchased a batch of 27 Lenovo Tabs from an online retailer that I am going to refurb and sell. But they are all locked. I have managed to restore the stock rom with no issues but cannot remove the FRP. Not sure what mistake I am making but each time I try following the instructions here I get a Bios error. Can any one please point me in the right direction? Thanks Steve |
All times are GMT +1. The time now is 12:29. |
vBulletin Optimisation provided by
vB Optimise (Pro) -
vBulletin Mods & Addons Copyright © 2024 DragonByte Technologies Ltd.
- GSM Hosting Ltd. - 1999-2023 -