desire 600 not working - GSM-Forum

Koller · 10-22-2015, 22:57

I have made s-off. Switch to modem mode. first imei repaired ok. second gives error :
Trying to repair IMEI 2...
Error: The phone has returned an error, command failed. Do you have smartcard inserted into the phone? You may need to S-OFF first also.

phone is already s-off and inserted sd-card xtc2clip

xtc2clip · 10-23-2015, 09:42

Could you please do 'oem h' in fastboot mode and post the output.

Koller · 10-23-2015, 13:39

sorry, already do not have phone. with desire SV all ok. only with desire 600

cinik79 · 11-11-2015, 19:43

Desire 600 imei2 repair error too(((.Smart card inserted, s-off.

xtc2clip · 11-12-2015, 11:29

Quote:

Originally Posted by cinik79

Desire 600 imei2 repair error too(((.Smart card inserted, s-off.

Please provide phone information and the error log/screenshot.

cinik79 · 11-13-2015, 11:10

Desire 600 - [Click to open]

xtc2clip · 11-13-2015, 21:03

cinik79 - I have checked and Im having the same result, I will check more and get back to you later.

cinik79 · 12-01-2015, 09:09

Not appeared solutions for SIM2 repair?

xtc2clip · 12-01-2015, 13:13

Quote:

Originally Posted by cinik79

Not appeared solutions for SIM2 repair?

Hello,

I will inform you once the solution is available.

Duumon · 12-09-2015, 00:32

any solutions yet?have same troubl

xtc2clip · 12-21-2015, 20:38

The solution will be added to our next release 1.16.

cinik79 · 01-07-2016, 11:05

Any solution SIM2 repair?

cinik79 · 03-20-2016, 07:32

Anyone found a solution?

iPhoneUnlocke · 03-20-2016, 09:24

Try with 1.19 version........

cinik79 · 03-22-2016, 21:01

Trying to repair IMEI 2...
Error: The phone has returned an error, command failed. Do you have smartcard inserted into the phone? You may need to S-OFF first also.
1.19 version........

10-22-2015, 22:57	#1 (permalink)
Koller Freak Poster Join Date: Jul 2005 Age: 42 Posts: 121 Member: 165586 Status: Offline Thanks Meter: 17	desire 600 not working I have made s-off. Switch to modem mode. first imei repaired ok. second gives error : Trying to repair IMEI 2... Error: The phone has returned an error, command failed. Do you have smartcard inserted into the phone? You may need to S-OFF first also. phone is already s-off and inserted sd-card xtc2clip

11-13-2015, 11:10	#6 (permalink)
cinik79 Freak Poster Join Date: Jul 2010 Location: Ukraine, Kharkiv Posts: 100 Member: 1350761 Status: Offline Thanks Meter: 24	Desire 600 - [Click to open] version-bootloader: 1.02.0001 (bootloader) version-baseband: 14.10.36Q.12 (bootloader) version-cpld: None (bootloader) version-microp: None (bootloader) version-main: 1.20.401.3 (bootloader) version-misc: PVT SHIP S-OFF (bootloader) serialno: FA3APWB03545 (bootloader) imei: 000000000000000 (bootloader) meid: (bootloader) product: cp3dug (bootloader) platform: HBOOT-8x25Q (bootloader) modelid: PO4911000 (bootloader) cidnum: 11111111 (bootloader) battery-status: good (bootloader) battery-voltage: 4080mV (bootloader) partition-layout: HTC (bootloader) security: off (bootloader) build-mode: SHIP (bootloader) boot-mode: FASTBOOT (bootloader) commitno-bootloader: dirty-979eabad7a (bootloader) hbootpreupdate: 12 (bootloader) gencheckpt: 0 Execution time is 15(ms) all: Done! 13.11.2015 11:43:49 Reading secure flag information 13.11.2015 11:43:50 ... (bootloader) Set pmic_level Done! L13 2850 (bootloader) Done! 13.11.2015 11:43:51 (bootloader) HWIO_SDC1_MD_REG_ADDR=0xA86000A0 (bootloader) HWIO_SDC1_NS_REG_ADDR=0xA86000A4 (bootloader) HWIO_SDC3_MD_REG_ADDR=0xA86000B0 (bootloader) HWIO_SDC3_NS_REG_ADDR=0xA86000B4 (bootloader) phys_to_virt(HWIO_SDC1_MD_REG_ADDR)=0xD32000A0 (bootloader) phys_to_virt(HWIO_SDC1_NS_REG_ADDR)=0xD32000A4 (bootloader) phys_to_virt(HWIO_SDC3_MD_REG_ADDR)=0xD32000B0 (bootloader) phys_to_virt(HWIO_SDC3_NS_REG_ADDR)=0xD32000B4 (bootloader) sdc_ns_reg value=0xFF9E0B58 (bootloader) HWIO_SDC1_MD_REG_ADDR=0xA86000A0 (bootloader) HWIO_SDC1_NS_REG_ADDR=0xA86000A4 (bootloader) HWIO_SDC3_MD_REG_ADDR=0xA86000B0 (bootloader) HWIO_SDC3_NS_REG_ADDR=0xA86000B4 (bootloader) phys_to_virt(HWIO_SDC1_MD_REG_ADDR)=0xD32000A0 (bootloader) phys_to_virt(HWIO_SDC1_NS_REG_ADDR)=0xD32000A4 13.11.2015 11:43:51 (bootloader) phys_to_virt(HWIO_SDC3_MD_REG_ADDR)=0xD32000B0 (bootloader) phys_to_virt(HWIO_SDC3_NS_REG_ADDR)=0xD32000B4 (bootloader) sdc_ns_reg value=0xFF9E0B58 (bootloader) [ERR] Cmd5 polling status timed out, MCI_STATUS: 0x0 (bootloader) [ERR] sdcc_command: sdcc_poll_status error, rc: 2 (bootloader) [ERR] Cmd8 polling status timed out, MCI_STATUS: 0x0 (bootloader) [ERR] sdcc_command: sdcc_poll_status error, rc: 2 (bootloader) [ERR] Cmd8 polling status timed out, MCI_STATUS: 0x0 (bootloader) [ERR] sdcc_command: sdcc_poll_status error, rc: 2 (bootloader) [ERR] Cmd8 polling status timed out, MCI_STATUS: 0x0 (bootloader) [ERR] sdcc_command: sdcc_poll_status error, rc: 2 13.11.2015 11:43:51 (bootloader) sdcc_init_memory_device done (bootloader) HWIO_SDC1_MD_REG_ADDR=0xA86000A0 (bootloader) HWIO_SDC1_NS_REG_ADDR=0xA86000A4 (bootloader) HWIO_SDC3_MD_REG_ADDR=0xA86000B0 (bootloader) HWIO_SDC3_NS_REG_ADDR=0xA86000B4 (bootloader) phys_to_virt(HWIO_SDC1_MD_REG_ADDR)=0xD32000A0 (bootloader) phys_to_virt(HWIO_SDC1_NS_REG_ADDR)=0xD32000A4 (bootloader) phys_to_virt(HWIO_SDC3_MD_REG_ADDR)=0xD32000B0 (bootloader) phys_to_virt(HWIO_SDC3_NS_REG_ADDR)=0xD32000B4 (bootloader) sdc_ns_reg value=0xFE2B0B5A (bootloader) Wait for AMSS ready 13.11.2015 11:44:06 Trying to swtich into modem mode ... 13.11.2015 11:44:06 Sending oem rtask c 13.11.2015 11:44:11 ... (bootloader) readsecureflag: secure flag: OFF 13.11.2015 11:44:39 Sending reboot-bootloader 13.11.2015 11:44:58 Execution time is 18968(ms) rebooting into bootloader... FAILED (status read failed (Unknown error)) 13.11.2015 11:44:58 Operation finished 13.11.2015 11:44:58 Reading CID information 13.11.2015 11:44:59 Execution time is 218(ms) ... FAILED (command write failed (Unknown error)) 13.11.2015 11:44:59 Reading MEID information 13.11.2015 11:44:59 Execution time is 390(ms) ... FAILED (command write failed (Unknown error)) 13.11.2015 11:44:59 Read information failed 13.11.2015 11:45:01 Phone DISconnected 13.11.2015 11:45:21 Phone connected [FA3APWB03545] *** Fastboot mode 13.11.2015 11:45:24 Trying to swtich into modem mode ... 13.11.2015 11:45:24 Sending oem rtask c 13.11.2015 11:45:25 ... (bootloader) Delay 93223(us) for dpram command before goto AMSS... 13.11.2015 11:45:30 Execution time is 5625(ms) FAILED (status read failed (Too many links)) 13.11.2015 11:45:31 Phone DISconnected 13.11.2015 11:45:36 Trying to connect in modem mode... 13.11.2015 11:45:36 Reading security info... 13.11.2015 11:45:36 Security is OFF 13.11.2015 11:45:36 Reading CID... 13.11.2015 11:45:36 Reading IMEI... 13.11.2015 11:45:36 Reading SIMLOCK info... 13.11.2015 11:45:36 13.11.2015 11:45:36 Checking lock status: 13.11.2015 11:45:36 Phone is UNLOCKED 13.11.2015 11:45:36 13.11.2015 11:45:36 SUCCESSFULLY connected 13.11.2015 11:45:45 Trying to repair IMEI 2... 13.11.2015 11:45:45 Error: The phone has returned an error, command failed. Do you have smartcard inserted into the phone? You may need to S-OFF first also.

10-23-2015, 09:42	#2 (permalink)
xtc2clip No Life Poster Join Date: Jun 2015 Posts: 6,556 Member: 2416253 Status: Offline Thanks Meter: 4,162	Could you please do 'oem h' in fastboot mode and post the output.

10-23-2015, 13:39	#3 (permalink)
Koller Freak Poster Join Date: Jul 2005 Age: 42 Posts: 121 Member: 165586 Status: Offline Thanks Meter: 17	sorry, already do not have phone. with desire SV all ok. only with desire 600

11-11-2015, 19:43	#4 (permalink)
cinik79 Freak Poster Join Date: Jul 2010 Location: Ukraine, Kharkiv Posts: 100 Member: 1350761 Status: Offline Thanks Meter: 24	Desire 600 imei2 repair error too(((.Smart card inserted, s-off.

11-13-2015, 21:03	#7 (permalink)
xtc2clip No Life Poster Join Date: Jun 2015 Posts: 6,556 Member: 2416253 Status: Offline Thanks Meter: 4,162	cinik79 - I have checked and Im having the same result, I will check more and get back to you later.

12-01-2015, 09:09	#8 (permalink)
cinik79 Freak Poster Join Date: Jul 2010 Location: Ukraine, Kharkiv Posts: 100 Member: 1350761 Status: Offline Thanks Meter: 24	Not appeared solutions for SIM2 repair?

12-09-2015, 00:32	#10 (permalink)
Duumon Freak Poster Join Date: Oct 2009 Posts: 128 Member: 1147875 Status: Offline Thanks Meter: 3	any solutions yet?have same troubl

12-21-2015, 20:38	#11 (permalink)
xtc2clip No Life Poster Join Date: Jun 2015 Posts: 6,556 Member: 2416253 Status: Offline Thanks Meter: 4,162	The solution will be added to our next release 1.16.

01-07-2016, 11:05	#12 (permalink)
cinik79 Freak Poster Join Date: Jul 2010 Location: Ukraine, Kharkiv Posts: 100 Member: 1350761 Status: Offline Thanks Meter: 24	Any solution SIM2 repair?

03-20-2016, 07:32	#13 (permalink)
cinik79 Freak Poster Join Date: Jul 2010 Location: Ukraine, Kharkiv Posts: 100 Member: 1350761 Status: Offline Thanks Meter: 24	Anyone found a solution?

03-20-2016, 09:24	#14 (permalink)
iPhoneUnlocke Cheater -Don't Deal with him- Join Date: Jun 2013 Location: New Zealand Posts: 1,626 Member: 1965371 Status: Offline Thanks Meter: 441	Try with 1.19 version........

03-22-2016, 21:01	#15 (permalink)
cinik79 Freak Poster Join Date: Jul 2010 Location: Ukraine, Kharkiv Posts: 100 Member: 1350761 Status: Offline Thanks Meter: 24	Trying to repair IMEI 2... Error: The phone has returned an error, command failed. Do you have smartcard inserted into the phone? You may need to S-OFF first also. 1.19 version........