desire u 500 unlock bl problem - GSM-Forum

themobileguy1 · 08-09-2015, 07:33

set connect as fstbod mode ok
unlock bl ok
send recve tokn ok
when it shows unlock bl press no .....do not unlock bl then poower switch wrk
and when press yes ....... then power switch not wrk
nthing hapn
what i do................

evanoo · 08-09-2015, 11:39

please post logs of the process

xtc2clip · 08-10-2015, 09:40

Your phone must be fully working before making bootloader unlock.
Make sure it powers on before trying to do anything with it.

themobileguy1 · 08-12-2015, 12:27

no..........it jst hng on fastbood mode
please explain how to flash with xtcclip
am newbie

themobileguy1 · 08-14-2015, 14:53

Code:

Reading information...
Using Fastboot mode...
Reading common information
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.03.0001
(bootloader) version-baseband: 14.15.50QD.26
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 1.27.707.2
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) serialno: HT3B1WE00554
(bootloader) imei: 357654052480673
(bootloader) meid: 
(bootloader) product: z4dug
(bootloader) platform: HBOOT-8x25Q
(bootloader) modelid: 0P3Z10000
(bootloader) cidnum: HTC__038
(bootloader) battery-status: good
(bootloader) battery-voltage: 3720mV
(bootloader) partition-layout: HTC
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: dirty-e9f20193
(bootloader) hbootpreupdate: 12
(bootloader) gencheckpt: 0
Execution time is 11(ms)
all: Done!
Reading secure flag information
... (bootloader) Set pmic_level Done! L13 2850
(bootloader) Done!
(bootloader) HWIO_SDC1_MD_REG_ADDR=0xA86000A0
(bootloader) HWIO_SDC1_NS_REG_ADDR=0xA86000A4
(bootloader) HWIO_SDC3_MD_REG_ADDR=0xA86000B0
(bootloader) HWIO_SDC3_NS_REG_ADDR=0xA86000B4
(bootloader) phys_to_virt(HWIO_SDC1_MD_REG_ADDR)=0xD32000A0
(bootloader) phys_to_virt(HWIO_SDC1_NS_REG_ADDR)=0xD32000A4
(bootloader) phys_to_virt(HWIO_SDC3_MD_REG_ADDR)=0xD32000B0
(bootloader) phys_to_virt(HWIO_SDC3_NS_REG_ADDR)=0xD32000B4
(bootloader) sdc_ns_reg value=0xFF9E0B58 
(bootloader) HWIO_SDC1_MD_REG_ADDR=0xA86000A0
(bootloader) HWIO_SDC1_NS_REG_ADDR=0xA86000A4
(bootloader) HWIO_SDC3_MD_REG_ADDR=0xA86000B0
(bootloader) HWIO_SDC3_NS_REG_ADDR=0xA86000B4
(bootloader) phys_to_virt(HWIO_SDC1_MD_REG_ADDR)=0xD32000A0
(bootloader) phys_to_virt(HWIO_SDC1_NS_REG_ADDR)=0xD32000A4
(bootloader) phys_to_virt(HWIO_SDC3_MD_REG_ADDR)=0xD32000B0
(bootloader) phys_to_virt(HWIO_SDC3_NS_REG_ADDR)=0xD32000B4
(bootloader) sdc_ns_reg value=0xFF9E0B58 
(bootloader) [ERR] Cmd5 polling status timed out, MCI_STATUS: 0x0
(bootloader) [ERR] sdcc_command: sdcc_poll_status error, rc: 2
(bootloader) [ERR] Cmd8 polling status timed out, MCI_STATUS: 0x0
(bootloader) [ERR] sdcc_command: sdcc_poll_status error, rc: 2
(bootloader) [ERR] Cmd8 polling status timed out, MCI_STATUS: 0x0
(bootloader) [ERR] sdcc_command: sdcc_poll_status error, rc: 2
(bootloader) [ERR] Cmd8 polling status timed out, MCI_STATUS: 0x0
(bootloader) [ERR] sdcc_command: sdcc_poll_status error, rc: 2
(bootloader) [ERR] Cmd55 polling status timed out, MCI_STATUS: 0x0
(bootloader) [ERR] sdcc_command: sdcc_poll_status error, rc: 2
(bootloader) [ERR] Cmd1 polling status timed out, MCI_STATUS: 0x0
(bootloader) [ERR] sdcc_command: sdcc_poll_status error, rc: 2
(bootloader) [ERR] Cmd1 polling status timed out, MCI_STATUS: 0x0
(bootloader) [ERR] sdcc_command: sdcc_poll_status error, rc: 2
(bootloader) [ERR] Cmd1 polling status timed out, MCI_STATUS: 0x0
(bootloader) [ERR] sdcc_command: sdcc_poll_status error, rc: 2
(bootloader) [ERR] Cmd1 polling status timed out, MCI_STATUS: 0x0
(bootloader) [ERR] sdcc_command: sdcc_poll_status error, rc: 2
(bootloader) [ERR] Cmd1 polling status timed out, MCI_STATUS: 0x0
(bootloader) [ERR] sdcc_command: sdcc_poll_status error, rc: 2
(bootloader) [ERR] Cmd1 polling status timed out, MCI_STATUS: 0x0
(bootloader) [ERR] sdcc_command: sdcc_poll_status error, rc: 2
(bootloader) [ERR] Cmd1 polling status timed out, MCI_STATUS: 0x0
(bootloader) [ERR] sdcc_command: sdcc_poll_status error, rc: 2
(bootloader) [ERR] Cmd1 polling status timed out, MCI_STATUS: 0x0
(bootloader) [ERR] sdcc_command: sdcc_poll_status error, rc: 2
(bootloader) [ERR] Cmd1 polling status timed out, MCI_STATUS: 0x0
(bootloader) [ERR] sdcc_command: sdcc_poll_status error, rc: 2
(bootloader) [ERR] Cmd1 polling status timed out, MCI_STATUS: 0x0
(bootloader) [ERR] sdcc_command: sdcc_poll_status error, rc: 2
(bootloader) [ERR] Cmd1 polling status timed out, MCI_STATUS: 0x0
(bootloader) [ERR] sdcc_command: sdcc_poll_status error, rc: 2
(bootloader) [ERR] Cmd1 polling status timed out, MCI_STATUS: 0x0
(bootloader) [ERR] sdcc_command: sdcc_poll_status error, rc: 2
(bootloader) [ERR] Cmd1 polling status timed out, MCI_STATUS: 0x0
(bootloader) [ERR] sdcc_command: sdcc_poll_status error, rc: 2
(bootloader) [ERR] Cmd1 polling status timed out, MCI_STATUS: 0x0
(bootloader) [ERR] sdcc_command: sdcc_poll_status error, rc: 2
(bootloader) [ERR] Cmd1 polling status timed out, MCI_STATUS: 0x0
(bootloader) [ERR] sdcc_command: sdcc_poll_status error, rc: 2
(bootloader) [ERR] Cmd1 polling status timed out, MCI_STATUS: 0x0
(bootloader) [ERR] sdcc_command: sdcc_poll_status error, rc: 2
(bootloader) [ERR] Cmd1 polling status timed out, MCI_STATUS: 0x0
(bootloader) [ERR] sdcc_command: sdcc_poll_status error, rc: 2
(bootloader) [ERR] Cmd1 polling status timed out, MCI_STATUS: 0x0
(bootloader) [ERR] sdcc_command: sdcc_poll_status error, rc: 2
(bootloader) [ERR] Cmd1 polling status timed out, MCI_STATUS: 0x0
(bootloader) [ERR] sdcc_command: sdcc_poll_status error, rc: 2
(bootloader) [ERR] Cmd1 polling status timed out, MCI_STATUS: 0x0
(bootloader) [ERR] sdcc_command: sdcc_poll_status error, rc: 2
(bootloader) [SD_HW_ERR] SD: No device attached
(bootloader) [RADIO_ERR] SD init fail !!!
(bootloader) Wait for AMSS ready

bl unlock

Code:

Starting bootloader unlock procedure
Phone detected, reading token...
Token detected successfully
Sending flash unlocktoken unlocktoken_HT3B1WE00554.bin
sending 'unlocktoken' (0 KB)... OKAY
writing 'unlocktoken'... (bootloader) unlock token check successfully
Execution time is 157(ms)
OKAY
Please continue the unlock process on your phone.

xtc2clip · 08-14-2015, 15:03

The process goes fine, if your phone is damaged you must flash it first.

dolatabadi · 08-21-2015, 12:55

سلام
من desire 500 دارم
تموم مراحل رو انجام میدم
مرحله اخر روی yes دیگه power کار نمیکنه

xtc2clip · 08-21-2015, 14:32

Quote:

Originally Posted by dolatabadi

سلام
من desire 500 دارم
تموم مراحل رو انجام میدم
مرحله اخر روی yes دیگه power کار نمیکنه

Sorry, we do not speak your language yet.

08-09-2015, 07:33	#1 (permalink)
themobileguy1 Freak Poster Join Date: Apr 2009 Location: Punjab INDIA Posts: 403 Member: 1021573 Status: Offline Sonork: 100.1622854 Thanks Meter: 55	desire u 500 unlock bl problem set connect as fstbod mode ok unlock bl ok send recve tokn ok when it shows unlock bl press no .....do not unlock bl then poower switch wrk and when press yes ....... then power switch not wrk nthing hapn what i do................

08-09-2015, 11:39	#2 (permalink)
evanoo Freak Poster Join Date: Jun 2008 Posts: 172 Member: 784593 Status: Offline Thanks Meter: 15	please post logs of the process

08-10-2015, 09:40	#3 (permalink)
xtc2clip No Life Poster Join Date: Jun 2015 Posts: 6,556 Member: 2416253 Status: Offline Thanks Meter: 4,162	Your phone must be fully working before making bootloader unlock. Make sure it powers on before trying to do anything with it.

08-12-2015, 12:27	#4 (permalink)
themobileguy1 Freak Poster Join Date: Apr 2009 Location: Punjab INDIA Posts: 403 Member: 1021573 Status: Offline Sonork: 100.1622854 Thanks Meter: 55	no..........it jst hng on fastbood mode please explain how to flash with xtcclip am newbie

08-14-2015, 15:03	#6 (permalink)
xtc2clip No Life Poster Join Date: Jun 2015 Posts: 6,556 Member: 2416253 Status: Offline Thanks Meter: 4,162	The process goes fine, if your phone is damaged you must flash it first.

08-21-2015, 12:55	#7 (permalink)
dolatabadi Junior Member Join Date: Oct 2008 Posts: 1 Member: 882333 Status: Offline Thanks Meter: 0	سلام من desire 500 دارم تموم مراحل رو انجام میدم مرحله اخر روی yes دیگه power کار نمیکنه