GSM-Forum

GSM-Forum (https://forum.gsmhosting.com/vbb/)
-   xtc2cliP (https://forum.gsmhosting.com/vbb/f961/)
-   -   HTC Desire 530 Unlock Problem " Failed to Enable SIMLOCK " [SOLVED] (https://forum.gsmhosting.com/vbb/f961/htc-desire-530-unlock-problem-failed-enable-simlock-solved-2190631/)

Little_Master 02-08-2017 04:30

HTC Desire 530 Unlock Problem " Failed to Enable SIMLOCK " [SOLVED]
 
HTC Desire 530 is giving error on Unlocking.

Unlock Bootloader is DONE

Phone S-OFF is DONE

Custom Recovery is DONE.

When I put phone is FTM Mode and press SIMLOCK TOOL , it says :

" Chosen_item 2
Loading simlock tool ...
Failed to enable SIMLOCK "

I have tried couple of time, even with xtc clip i copied specail files couple of times, but still showing error.

Picture Attached
" http://i1362.photobucket.com/albums/...psnad1zz4c.jpg"

What is the solution ???

LITTLE MASTER

xtc2clip 02-09-2017 16:11

Hello,

You don't need to use this.

Please use "Special unlock/IMEI" tab.

Sudan-Mobiles 02-19-2017 14:20

Quote:

Originally Posted by xtc2clip (Post 12331735)
Hello,

You don't need to use this.

Please use "Special unlock/IMEI" tab.

SAME PROBLEM what should I do after s-off and copy files from special unlock tab .. ?
I insert clip in sd card off phone and press FTM phone phone went to same as picture

xtc2clip 02-21-2017 18:30

Quote:

Originally Posted by Sudan-Mobiles (Post 12350484)
SAME PROBLEM what should I do after s-off and copy files from special unlock tab .. ?
I insert clip in sd card off phone and press FTM phone phone went to same as picture

Hello,

It means that files are not copied correctly, clip ejected too quick or no safe removal was done.

Try to repair FS:
http://forum.gsmhosting.com/vbb/f961...t-etc-1964648/

then copy files again, do Safe eject and then insert into phone and press "FTM".

This should work.

mynos 02-21-2017 22:42

Unlock this device is easy no needed special Knowledge to unlock this device... First tick OEM unlock, Unlock Bootloader, Flash TWRP, Boot to Bootloader, Reboot Recovery, in TWRP do a S-OFF, Copy Special/IMEI tab HTC Desire 530, Power off phone, Insert Clip in phone, Power on phone using Volume up and power 5 seconds, realease power button, but volume up pressed, phone enter to mode Diag after that the phone reboot automatically and you phone is unlock sim card done...

olubolajames 03-23-2017 23:02

Quote:

Originally Posted by Little_Master (Post 12328264)
HTC Desire 530 is giving error on Unlocking.

Unlock Bootloader is DONE

Phone S-OFF is DONE

Custom Recovery is DONE.

When I put phone is FTM Mode and press SIMLOCK TOOL , it says :

" Chosen_item 2
Loading simlock tool ...
Failed to enable SIMLOCK "

I have tried couple of time, even with xtc clip i copied specail files couple of times, but still showing error.

Picture Attached
" http://i1362.photobucket.com/albums/...psnad1zz4c.jpg"

What is the solution ???

LITTLE MASTER


same issue even after repair and format file system and i tried sprint tab nothing worked

Little_Master 03-23-2017 23:14

Quote:

Originally Posted by olubolajames (Post 12412728)
same issue even after repair and format file system and i tried sprint tab nothing worked

My problem was solved.
The Memory Chip we insert inside the phone was not going in properly.

I changed that strip and redone whole procedure , It worked like Charm.

So I suggest you to change this strip and MAKE SURE its going 100% inside the phone .


https://ae01.alicdn.com/kf/HTB14ZTcJ...pg_640x640.jpg


LITTLE MASTER

Sudan-Mobiles 03-27-2017 10:33

Quote:

Originally Posted by Little_Master (Post 12412739)
My problem was solved.
The Memory Chip we insert inside the phone was not going in properly.

I changed that strip and redone whole procedure , It worked like Charm.

So I suggest you to change this strip and MAKE SURE its going 100% inside the phone .


https://ae01.alicdn.com/kf/HTB14ZTcJ...pg_640x640.jpg


LITTLE MASTER

I think you r wright because was change old orignal strip with new one and found its not work with many phones:o:o

olubolajames 03-29-2017 12:37

Quote:

Originally Posted by Little_Master (Post 12412739)
My problem was solved.
The Memory Chip we insert inside the phone was not going in properly.

I changed that strip and redone whole procedure , It worked like Charm.

So I suggest you to change this strip and MAKE SURE its going 100% inside the phone .


https://ae01.alicdn.com/kf/HTB14ZTcJ...pg_640x640.jpg


LITTLE MASTER

i don't think it's the strips i have change to over 4 new once but still same error i guess the unlock still has a little bug maybe in next update xclip should check well.

Little_Master 03-31-2017 07:10

Quote:

Originally Posted by olubolajames (Post 12422200)
i don't think it's the strips i have change to over 4 new once but still same error i guess the unlock still has a little bug maybe in next update xclip should check well.

I just unlocked 6 pcs more , there is no problem at all.


http://i1362.photobucket.com/albums/...psnxr2e7gz.jpg

LITTLE MASTER

MiRoOo 04-03-2017 23:50

Quote:

Originally Posted by olubolajames (Post 12422200)
i don't think it's the strips i have change to over 4 new once but still same error i guess the unlock still has a little bug maybe in next update xclip should check well.

Ok, I've been facing the exact same issue, i tried almost every Flex i have but nothing changed, same problem,
After all, i tried to go another way, software unlock, then i found this thread,
Which is for 626 but it works on 530 without a single change,
You may want to give it a try,
Solution tested by me, and everything is working great,
My phone was locked at T-Mobile if you should know,

Best Regards

olubolajames 04-13-2017 18:21

Quote:

Originally Posted by little_master (Post 12425305)
i just unlocked 6 pcs more , there is no problem at all.


http://i1362.photobucket.com/albums/...psnxr2e7gz.jpg

little master

i just got new srips and still same error i tried 3 new once pls whats really wrong

xtc2clip 04-14-2017 12:39

Quote:

Originally Posted by olubolajames (Post 12448961)
i just got new srips and still same error i tried 3 new once pls whats really wrong

Repair filesystem of your clip also.

.:MobileLife:. 09-17-2017 14:15

Quote:

Originally Posted by xtc2clip (Post 12331735)
Hello,

You don't need to use this.

Please use "Special unlock/IMEI" tab.

Nice support worked for me:cool:

torla 08-24-2018 00:08

I have this problem
http://forum.gsmhosting.com/vbb/atta...1&d=1535065546

deepakgarg 08-24-2018 08:58

Quote:

Originally Posted by torla (Post 13281631)

http://forum.gsmhosting.com/vbb/12355505-post4.html
boot phone to download mode and make sure sd mounted is written with clip connected to phone than boot to ftm from software

torla 08-24-2018 11:21

1 Attachment(s)
not help for me always this message:

Attachment 367725

xtc2clip 08-24-2018 20:59

Quote:

Originally Posted by torla (Post 13282144)
not help for me always this message:

Attachment 367725

Please post full info about your phone.

torla 08-24-2018 21:52

1 Attachment(s)
Downgrade 7 -> 6.01
1. UNlock botloader,
2. instal recovery
3. s-off
4. special unlock/imei
.5 FTM mode

[ATTACH]LOG[/ATTACH]

torla 08-26-2018 22:02

1 Attachment(s)
this in downloa mode

Attachment 367766

juancar273 08-27-2018 06:53

Quote:

Originally Posted by torla (Post 13282144)
not help for me always this message:

Attachment 367725

I got the same screen with the 530 and can't unlock the phone.

deepakgarg 08-27-2018 07:08

Quote:

Originally Posted by torla (Post 13285827)
this in downloa mode



Attachment 367766



Sd not mounted ?? On screen
Clip connected or not
With clip sd mounted will b written on screen


Sent from my iPhone using Tapatalk

calitox 09-14-2018 15:14

Quote:

Originally Posted by xtc2clip (Post 13283004)
Please post full info about your phone.

hello I've unlocked a lot 530 from tmobile using power adapter for s-off and copy de files 530 on xtc2smart clip then FTM......BUT now I have yhis some error


http://forum.gsmhosting.com/vbb/atta...5&d=1535105915

calitox 09-14-2018 16:49

This is my log....

After do all step I get the same error check the image

Reading information...
Using Fastboot mode...
Reading common information
(bootloader) kernel: lk
(bootloader) product: htc_a16ul
(bootloader) version: 1.0
(bootloader) imei: 3594170700****8
(bootloader) version-main: 1.36.352.14
(bootloader) boot-mode: download
(bootloader) version-baseband: 01.01_U113251531_68.02.70418G
(bootloader) version-bootloader: 1.0.0.0000
(bootloader) mid: 2PST20000
(bootloader) cid: 11111111
all:
Execution time is 23(ms)
Reading CID information
... (bootloader) cid: 11111111
OKAY
Execution time is 36(ms)
Reading MEID information
... (bootloader) meid:
OKAY
Execution time is 10(ms)
Reading IMEI1 information
... (bootloader) imei: 3594170*******28
OKAY
Execution time is 1(s)
Reading IMEI2 information
... (bootloader) imei2:
OKAY
Execution time is 11(ms)
Reading secure flag information
...(bootloader) Device security level S-OFF
OKAY
Execution time is 7(ms)
Reading serial number information
... (bootloader) Device Serial No. is HT66FBR03282
OKAY
Execution time is 12(ms)
Read information completed.


https://drive.google.com/file/d/1P1c...ew?usp=sharing

https://drive.google.com/file/d/1sNx...ew?usp=sharing

https://drive.google.com/file/d/1Y6T...ew?usp=sharing


https://drive.google.com/file/d/1vxE...ew?usp=sharing

https://drive.google.com/file/d/1sNx...ew?usp=sharing

calitox 09-19-2018 14:37

Any new about this problem
 
I have 4 xtc2cliP I have the same problem with all xtc2cliP

xtc2clip 09-21-2018 20:51

Quote:

Originally Posted by calitox (Post 13317492)
This is my log....

Please download this:
https://xtc2.net/downloads/2PSTDIAG

Replace file on the clip and repeat operation (do NOT use copy files button, just insert clip and reboot to FTM)

calitox 09-23-2018 00:01

Quote:

Originally Posted by xtc2clip (Post 13330056)
Please download this:
https://xtc2.net/downloads/2PSTDIAG

Replace file on the clip and repeat operation (do NOT use copy files button, just insert clip and reboot to FTM)

Worked Perfect:D:D:D:D

calitox 09-23-2018 00:05

Quote:

Originally Posted by xtc2clip (Post 13330056)
Please download this:
https://xtc2.net/downloads/2PSTDIAG

Replace file on the clip and repeat operation (do NOT use copy files button, just insert clip and reboot to FTM)

I have the same problem with HTC 626s from Tmobile please send me the file;):)

deepakgarg 09-23-2018 14:26

Quote:

Originally Posted by calitox (Post 13331783)
I have the same problem with HTC 626s from Tmobile please send me the file;):)

http://forum.gsmhosting.com/vbb/f961...oblem-2356357/

mcdrakomag 10-08-2019 21:54

2PSTDIAG

link not work, file was not found on this server.

deepakgarg 10-09-2019 10:48

Quote:

Originally Posted by mcdrakomag (Post 13853857)
2PSTDIAG

link not work, file was not found on this server.

use xtc2clip software for diag files from special unlock tab

chlakh11787 06-02-2021 18:27

Quote:

Originally Posted by xtc2clip (Post 13330056)
Please download this:
https://xtc2.net/downloads/2PSTDIAG

Replace file on the clip and repeat operation (do NOT use copy files button, just insert clip and reboot to FTM)

can you upload pls i have sam problem unlocke


All times are GMT +1. The time now is 07:28.


vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2024 DragonByte Technologies Ltd.
- GSM Hosting Ltd. - 1999-2023 -

Page generated in 0.29174 seconds with 6 queries

SEO by vBSEO