GSM-Forum

GSM-Forum (https://forum.gsmhosting.com/vbb/)
-   xtc2cliP (https://forum.gsmhosting.com/vbb/f961/)
-   -   M7 verizone unlock bootloader failed (https://forum.gsmhosting.com/vbb/f961/m7-verizone-unlock-bootloader-failed-1991128/)

foony 09-14-2015 11:26

M7 verizone unlock bootloader failed
 
hello
I can not unlock bootloader. It is possible to flash EU sw (or revolutionary custom flash ) to this phone or there is some HW difference? It is possible to set Imei to EU imei and CID to HTC___0032?
thanks for help.

Starting bootloader unlock procedure
Phone detected, reading token...
Token detected successfully
Checking server connection...
Communicating with the XTC 2 Clip ...
Connecting to the server...
Waiting for the server to process request, it may take up to 5 minutes...
Your request was processed successfully! Unlock token has been obtained
Sending flash unlocktoken unlocktoken_FA441S902184.bin
Execution time is 156(ms)
sending 'unlocktoken' (0 KB)... OKAY
writing 'unlocktoken'... FAILNot support on this device!
FAILED (remote: Not support on this device!)
Error: The unlock token was not accepted by the phone. Try to re-calculate it again.


Reading information...
Using Fastboot mode...
Reading common information
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.57.0000
(bootloader) version-baseband: 1.13.41.0702
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 5.28.605.2
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) serialno: FA441S902184
(bootloader) imei: 990xxxxxxxxx455
(bootloader) meid: 990xxxxxxxxx45
(bootloader) product: m7_wlv
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN0731000
(bootloader) cidnum: VZW__001
(bootloader) battery-status: good
(bootloader) battery-voltage: 4219mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: dirty-6d8a0b9b
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
Execution time is 50(ms)
all: Done!
8064 detected, reading IMEI2 ...
... (bootloader) [ERR] Command error !!!
Execution time is 10(ms)
OKAY
Reading secure flag information
... (bootloader) secure_flag: 3
Execution time is 10(ms)
OKAY
Reading CID information
... (bootloader) cid: VZW__001
Execution time is 10(ms)
OKAY
Read information completed.

xtc2clip 09-14-2015 14:35

Hello,

I don't think you can flash EU, as it's wlv phone, but IMEI and CID can be repaired to the desired value, you don't have to unlock bootloader for this.


All times are GMT +1. The time now is 19:04.


vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2024 DragonByte Technologies Ltd.
- GSM Hosting Ltd. - 1999-2023 -

Page generated in 0.08692 seconds with 6 queries

SEO by vBSEO