Success stories :) Hello, If you want to report a success story - please use this thread. This will help other customers ;):cool: |
HTC M7 make s-off and supper CID done http://images.tapatalk-cdn.com/15/07...cdcc967de2.jpg http://images.tapatalk-cdn.com/15/07...9f70388efd.jpg http://images.tapatalk-cdn.com/15/07...c17b5dff39.jpg Sent from my iPhone using Tapatalk |
HTC Desire C S-off Direct Mode With XTC2CLIP HTC Desire C S-off Direct Mode With XTC2CLIP Here the some Screenshots ., How to do S-OFF Direct mode http://www.smart-gsm.net/xtc2clip/dc/XTC2CLIP-D300.jpg http://www.smart-gsm.net/xtc2clip/dc...-D300-SOFF.jpg After S-OFF Sucessfully ., Reboot phone in Bootloader mode and Read Phone information again http://www.smart-gsm.net/xtc2clip/dc...300-SOFF-1.jpg |
HTC Desire C CID Change SD Mode With XTC2clip Here the Some Screenshots http://www.smart-gsm.net/xtc2clip/dc...D300-CIDSD.jpg http://www.smart-gsm.net/xtc2clip/dc/HTCDCSD.jpg http://www.smart-gsm.net/xtc2clip/dc/HTDDC.png |
I don't know How to Say it, But IT's AMAZING box REALLY for HTC I just receive it and two HTC M8 S-off and super CID already Done. Thanks Support, we need a support for Flash File if it's possible . Thanks Sending oem writesecureflag 0 ... (bootloader) SecuritySDInit: counter = 6 (bootloader) m8_init_sd, SD card already power on (bootloader) [SPEW] GPIO 0 status is 0 (bootloader) sdhci_open: id=0 (bootloader) Initializing MMC host data structure and clock! (bootloader) mmc slot#2 clock enabled (bootloader) sdhci_set_clock: slot 2, freq 192000000 (bootloader) GPLL0 is enabled (bootloader) clock_update_cfg_sd is done (bootloader) sd clock set done (bootloader) sdhci_set_bus_width: bus width 0 (bootloader) sdhci_clk_supply: freq 400000 (bootloader) Error: Command never completed (bootloader) Error: Command timeout error (bootloader) Error: Command completed with errors (bootloader) The response for CMD8 does not match the supplied value (bootloader) Decoded CID fields: (bootloader) Manufacturer ID: 7f (bootloader) OEM ID: 0x0 (bootloader) Product Name: 5270 (bootloader) Product revision: 5.2 (bootloader) Product serial number: B4E (bootloader) Manufacturing date: 2 2015 (bootloader) sdhci_clk_supply: freq 50000000 (bootloader) sdhci_set_bus_width: bus width 1 (bootloader) Done initialization of the card (bootloader) erase_grpsize: -16777216 (bootloader) erase_grpmult: 261078256 (bootloader) wp_grpsize: 1 (bootloader) wp_grpen: 1 (bootloader) perm_wp: 0 (bootloader) temp_wp: 0 (bootloader) [Tuxera][Error] No exFAT partition found (bootloader) writesecureflag: KeyCard remain count 10000 (bootloader) PID:272 (bootloader) Start Verify: 3 (bootloader) [PGFS] partition_update_pgfs: pg1fs_security (bootloader) TZ_HTC_SVC_ENC ret = 0 (bootloader) [PGFS] partition_update_pgfs: pg2fs_sec_recovery Execution time is 9375(ms) OKAY Operation finished Phone connected ! CID value has been set to super-cid. Please save to SD card and use in phone Phone connected ! |
htc desire 510 Htc desire 510 unlock s-off ok :) info read after offline unlock mode Sending getvar all (bootloader) version: 0.5 (bootloader) version-bootloader: 3.19.0.0000 (bootloader) version-baseband: 01.02.012_U10251_39.08.40922 (bootloader) version-cpld: None (bootloader) version-microp: None (bootloader) version-main: 1.51.401.2 (bootloader) version-misc: PVT SHIP S-OFF (bootloader) serialno: CC499Y400282 (bootloader) imei: 353450060860475 (bootloader) imei2: Not Support (bootloader) meid: 00000000000000 (bootloader) product: a11_ul (bootloader) platform: hTCBmsm8916 (bootloader) modelid: 0PCV20000 (bootloader) cidnum: 11111111 (bootloader) battery-status: good (bootloader) battery-voltage: 0mV (bootloader) partition-layout: Generic (bootloader) security: off (bootloader) build-mode: SHIP (bootloader) boot-mode: FASTBOOT (bootloader) commitno-bootloader: 3532d7cc (bootloader) hbootpreupdate: 11 (bootloader) gencheckpt: 0 (bootloader) mfg-name: 1001 Execution time is 27(ms) all: Done! Sending oem readsecureflag ... (bootloader) secure_flag: 0 Execution time is 20(ms) OKAY |
M7_ul super CID done in less than 30 seconds via SD editor.Operation was so easy,just in a blink of an eye.Hope for more updates and maybe htc full rom collection availablity. Thanks so much |
Htc m9 unlock Htc m9 t-mob usa s-off super cid 11111111 & unlock done xtc2clip |
Htc one m7_ul unlock done Regards |
htc velocity 4g x710s imei change super cid DONE @ thank you Team :) |
htc one x 15 pcs unlock done :http://forum.gsmhosting.com/vbb/f961...-tell-1965321/ |
HTC M7 make s-off and supper CID done 2 Attachment(s) HTC M7 make s-off and supper CID done Writing information to service files on SD card... CID settings saved Security settings saved Done. Attachment 339408 Attachment 339407 |
Quote:
i have m7-ul and i can not make s-off with tool can u help me the phone showing SD INIT FAIL |
Quote:
|
successfully s-off htc m8 sprint harman/kardon (bootloader) sdhci_set_clock: slot 2, freq 192000000 (bootloader) GPLL0 is enabled (bootloader) clock_update_cfg_sd is done (bootloader) sd clock set done (bootloader) sdhci_set_bus_width: bus width 0 (bootloader) sdhci_clk_supply: freq 400000 (bootloader) Error: Command never completed (bootloader) Error: Command timeout error (bootloader) Error: Command completed with errors (bootloader) The response for CMD8 does not match the supplied value (bootloader) Decoded CID fields: (bootloader) Manufacturer ID: 7f (bootloader) OEM ID: 0x0 (bootloader) Product Name: 5270 (bootloader) Product revision: 5.2 (bootloader) Product serial number: B4E (bootloader) Manufacturing date: 2 2015 (bootloader) sdhci_clk_supply: freq 50000000 (bootloader) sdhci_set_bus_width: bus width 1 (bootloader) Done initialization of the card (bootloader) erase_grpsize: -16777216 (bootloader) erase_grpmult: 261078256 (bootloader) wp_grpsize: 1 (bootloader) wp_grpen: 1 (bootloader) perm_wp: 0 (bootloader) temp_wp: 0 (bootloader) [Tuxera][Error] No exFAT partition found (bootloader) writesecureflag: KeyCard remain count 10000 (bootloader) PID:267 (bootloader) Start Verify: 3 (bootloader) [PGFS] partition_update_pgfs: pg1fs_security (bootloader) TZ_HTC_SVC_ENC ret = 0 (bootloader) [PGFS] partition_update_pgfs: pg2fs_sec_recovery Execution time is 4187(ms) OKAY Operation finished Phone DISconnected |
Hi 3 pcs done One Max (S-OFF+Super CID) Desire 700 (S-OFF+Super CID) Desire 816w (S-OFF+Super CID) ============ Quistion About who model have 2 imei,,, I see Only One Option for Imei Input in SDEditor..What Can I do ? P.S:i try repair imei on desire 700 but no one change..(not repair imei 1 and 2) |
Quote:
You should use direct mode instead. Check "Direct" tab in XTC2Tool. |
Hi again of course i did but not done do you want contact you on skype for check by self? i have desire 700 in hand now Thanks |
Quote:
|
Quote:
my skype : mhammadleo |
Quote:
|
HTC One M9 Sprint S-OFF Done Code: Sending oem writesecureflag 0 |
|
Htc M8 Unlock done |
No logs because I don't have the phones anymore but I have unlocked and done s-off so far: Ace with hboot 2.00.03 s-off and unlock One mini2 unlock M7_UL unlock and another s-off and super cid One M8 unlock One M9 unlock and s-off One X Evitare unlock and s-off |
xtc clip2 is awesome i'm waiting for it |
Htc one x 2 more unlock done |
Hi HTC Butterfly Deluxe_U (S-OFF and Super CID) HTC One M7_U (S-OFF and Super CID) HTC One M7_UL (S-OFF and Super CID) HTC Desire 816W ((S-OFF and Super CID)again special thanks for amazing tools |
WOW i'm Really Surprise... Today SOFF and Super CID FOR : * One Max * One M7 (Hboot 1.57.000) * One SV (PL80100) Note: I use Y Cable For One SV because always failed with put xtc ribbon to sd slot on phone |
Today M8 dual Sim S-Off Super Cid done. also One Max 2.49 Hboot S-off and super Cid done. |
HTC one X and HTC PYRAMID unlock Done By XTC2 clip [emoji106] http://images.tapatalk-cdn.com/15/07...a5ef8d732b.jpg http://images.tapatalk-cdn.com/15/07...086197c58d.jpg http://images.tapatalk-cdn.com/15/07...831a3e0c59.jpg Sent from my iPhone using Tapatalk |
Htc M7 unlock success |
|
Desire 500 s-off supercid done! 1 Attachment(s) http://forum.gsmhosting.com/vbb/atta...1&d=1437409858 Code: Sending getvar all |
I do not have pics or log i just s-off m8 and repair in the blink of an eye AMAZING tool the best out there thank you xtc2 br |
HTC One s + others S-OFF + Supercid + Imei repair with my "best Y cable", (is one old HD7 cable with one Sd Card reader of 2 cent but Work Fine, NOT Work Green HD7 Cable NEW from *****), and XTC2CLIP setted right in Off-Line Mode, Here: http://i1366.photobucket.com/albums/...ps3vuw3l2d.jpg http://i1366.photobucket.com/albums/...pszwgjdckw.jpg and only one part of all other here: M7_UL http://i1366.photobucket.com/albums/...ps8e1e8709.jpg ONE X (Tegra Chipset) http://i1366.photobucket.com/albums/...psfda304bc.jpg M7_WLS SPRINT http://i1366.photobucket.com/albums/...ps8xawd1us.jpg M8_UL http://i1366.photobucket.com/albums/...pseajyseva.jpg And many others just the time of write Imei of new phone in "Config.file" and save, (S-OFF and Supercid remain setted). NOTE: OBVIUS that Imei showing in first photo isn't TRUE, i've modified Photo for Customer Privacy!!! Best Clip and Compliment for developers of XTC2CLIP BR allumts:) |
What a great report from allumts! |
HTC Desire 626 S-OFF and Super CID special thanks for amazing tools XTC2 |
Htc Desire 300 unlock success |
Desire 601c CP3DCG S-off ChangeCid Done 1 Attachment(s) Code: Sending getvar all http://forum.gsmhosting.com/vbb/atta...1&d=1437669698 |
I have apply the S-OFF, supercid.. in 3 HTC One M9 and this includes my phone, without problems. Thanks you for this amazing tool XTC CLIP 2 !! Really great to have S-OFF, sim unlock and other functions on this.. |
M7_WLV (HTC One M7 Verizon) get S-OFF successfull by XTC2 http://s25.postimg.org/7gq5r9ghr/20150724_031703.jpg I modified the term *** UNLOCKED *** :D |
Htc Desire 500 unlock success Code: Sending oem clearsimlocktype |
Quote:
|
Before: http://forum.gsmhosting.com/vbb/atta...1&d=1437834189 Code: Sending getvar all http://forum.gsmhosting.com/vbb/atta...1&d=1437834189 |
Desire 300 S-off & Super CID Done;) http://www.pars-gsm.com/picup.php?fi...sire%20300.jpg http://www.pars-gsm.com/picup.php?fi...re%20300_2.jpg ======= M7_UL S-off & Super CID Done;) http://www.pars-gsm.com/picup.php?fi...9967_M7_UL.jpg ======= M7_U S-off & Super CID Done;) http://www.pars-gsm.com/picup.php?fi...9_M7_U%202.jpg http://www.pars-gsm.com/picup.php?fi...01638_M7_U.jpg Thanks For Your Great Tool |
Quote:
I thing this amazing tool was the best of my suggestion to you ;) Luv xtc2clip Luv u my freind |
Quote:
|
HTC One M9 - HIMA_UHL - Security Mode: S-DEB Successfully S-OFFed and changed security flag from S-DEB to S-OFF on HTC One M9 - HIMA_UHL Using XTC2Clip Using Direct Mode XTC2CLIP v1.05. THIS IS THE ONE AND ONLY TOOL YOU WILL NEED FOR HTC. BEFORE: http://i.cubeupload.com/Uecd5n.jpg AFTER: Code: Reading information... |
|
All times are GMT +1. The time now is 05:24. |
vBulletin Optimisation provided by
vB Optimise (Pro) -
vBulletin Mods & Addons Copyright © 2024 DragonByte Technologies Ltd.
- GSM Hosting Ltd. - 1999-2023 -