htc one .. Great Work.. |
I just want to know .. someone else know how to change the word in the pink part? |
wildfire s s-off & super cid done http://www.pars-gsm.com/picup.php?fi...ldfire%20s.jpg http://www.pars-gsm.com/picup.php?fi...re%20s%202.jpg |
@Farzad.m, if you Upload Immage in this site only one 5% can see you photo, no one photo you has posted is visible...so or try to change site or is useless you post "Success Story".... BR allumts |
htc j butterfly s-off and super cid done Reading information... Using Fastboot mode... Reading common information (bootloader) version: 0.5 (bootloader) version-bootloader: 1.41.0000 (bootloader) version-baseband: 1.01.12.1122 (bootloader) version-cpld: None (bootloader) version-microp: None (bootloader) version-main: 1.39.970.3 (bootloader) version-misc: PVT SHIP S-OFF (bootloader) serialno: FA2C1S509371 (bootloader) imei: 990000664439751 (bootloader) meid: 99000066443975 (bootloader) product: deluxe_j (bootloader) platform: HBOOT-8064 (bootloader) modelid: PL9910000 (bootloader) cidnum: 11111111 (bootloader) battery-status: good (bootloader) battery-voltage: 3746mV (bootloader) partition-layout: Generic (bootloader) security: off (bootloader) build-mode: SHIP (bootloader) boot-mode: FASTBOOT (bootloader) commitno-bootloader: 7860e302 (bootloader) hbootpreupdate: 11 (bootloader) gencheckpt: 0 Execution time is 60(ms) all: Done! 8064 detected, reading IMEI2 ... ... (bootloader) [ERR] Command error !!! Execution time is 20(ms) OKAY Reading secure flag information ... (bootloader) secure_flag: 0 Execution time is 10(ms) OKAY Reading CID information ... (bootloader) cid: 11111111 Execution time is 20(ms) OKAY Read information completed. Phone DISconnected |
M7_WLS s-off supercid done Reading information... Using Fastboot mode... Reading common information (bootloader) version: 0.5 (bootloader) version-bootloader: 1.57.0000 (bootloader) version-baseband: 1.01.20.0904_2 (bootloader) version-cpld: None (bootloader) version-microp: None (bootloader) version-main: 5.05.651.2 (bootloader) version-misc: PVT SHIP S-OFF (bootloader) serialno: FA43WS904748 (bootloader) imei: 990004288931896 (bootloader) meid: 99000428893189 (bootloader) product: m7_wls (bootloader) platform: HBOOT-8064 (bootloader) modelid: PN0720000 (bootloader) cidnum: 11111111 (bootloader) battery-status: good (bootloader) battery-voltage: 3803mV (bootloader) partition-layout: Generic (bootloader) security: off (bootloader) build-mode: SHIP (bootloader) boot-mode: FASTBOOT (bootloader) commitno-bootloader: dirty-0e1af350 (bootloader) hbootpreupdate: 11 (bootloader) gencheckpt: 0 Execution time is 80(ms) all: Done! 8064 detected, reading IMEI2 ... ... (bootloader) [ERR] Command error !!! Execution time is 10(ms) OKAY Reading secure flag information ... (bootloader) secure_flag: 0 Execution time is 10(ms) OKAY Reading CID information ... (bootloader) cid: 11111111 Execution time is 20(ms) OKAY Read information completed. |
http://forum.gsmhosting.com/vbb/atta...1&d=1438186672 Code: Sending oem writesecureflag 0 |
|
s-off and super cid done http://www.4shared.com/download/1a4t....jpg?lgfp=3000 |
tnx good goooooooooooooooooooooood dongle |
Here the lol...spamming here...ahhhhhhhhhh |
HTC ONE X (tegra chipset) S-OFF, Super CID, IMEI repair done. http://i828.photobucket.com/albums/z...ps9kln9mey.jpg |
HTC Desire 601 dual sim 6160 0P4E410 S-OFF, SuperCID - OK IMEI repair done - OK In terminal window input IMEI1 - oem writeimei 0 35xxxxxxxxxxxxx IMEI2 - oem writeimei 1 35xxxxxxxxxxxxx |
One Sv K2_UL S-off supercid downgrade Done 1 Attachment(s) http://forum.gsmhosting.com/vbb/atta...1&d=1438790448 operation log: Code: Sending oem writesecureflag 0 Code: (bootloader) [RUU]UZ,radio,94 |
another m8 done Code: Reading information... |
M9 & M8 Verizon: s-off done > fastest than ever |
We thank the masters how health efforts |
This is my first post on this thread. few minutes ago received my clip, and during 3 minutes successfully registered, activated, S-OFF'd and succesfully write Super CID HTC One Mini 2 !!! sorry i have not picture now (my phones usb connector not working properly. will post picture later) |
8/15/2015 8:59:16 PM Operation finished 8/15/2015 8:59:33 PM Reading information... 8/15/2015 8:59:33 PM Using Fastboot mode... 8/15/2015 8:59:33 PM Reading common information 8/15/2015 8:59:33 PM (bootloader) version: 0.5 (bootloader) version-bootloader: 1.01.0004 (bootloader) version-baseband: 1.00.10.0917_2 (bootloader) version-cpld: None (bootloader) version-microp: None (bootloader) version-main: 2.23.720.1 (bootloader) version-misc: PVT SHIP S-ON (bootloader) serialno: HT365MM00148 (bootloader) imei: 355195000000017 (bootloader) meid: (bootloader) product: protodcg (bootloader) platform: HBOOT-8625 (bootloader) modelid: PK7820000 (bootloader) cidnum: HTC__038 (bootloader) battery-status: good (bootloader) battery-voltage: 3883mV (bootloader) partition-layout: HTC (bootloader) security: on (bootloader) build-mode: SHIP (bootloader) boot-mode: FASTBOOT (bootloader) commitno-bootloader: dirty-1b72952e (bootloader) hbootpreupdate: 12 (bootloader) gencheckpt: 0 Execution time is 8(ms) all: Done! 8/15/2015 8:59:33 PM Reading secure flag information 8/15/2015 8:59:34 PM ... (bootloader) AMSS is ready 8/15/2015 8:59:34 PM (bootloader) readsecureflag: secure flag: OFF Execution time is 210(ms) b.r yuvi |
HTC One M8 S-OFF, SuperCID Done xtc2cliP 4 Attachment(s) http://i58.tinypic.com/24xgm00.jpg Remove Xtc2clip From Computer and insert in Phone MicroSD Slot if no MicroSD Slot Use Y Cable Put Phone in Bootloader Menu [hold "volume down + power button] Select simlock menu http://i62.tinypic.com/6is2lh.jpg After Done press Vol up reboot phone http://i62.tinypic.com/aa8ahd.jpg Done http://i62.tinypic.com/f4n0ba.jpg |
sprint M8 bootloader unlock fast and great Starting bootloader unlock procedure Phone detected, reading token... Token detected successfully Checking server connection... Communicating with the XTC 2 Clip ... Connecting to the server... Waiting for the server to process request, it may take up to 5 minutes... Your request was processed successfully! Unlock token has been obtained Sending flash unlocktoken unlocktoken_HT4CGSF01156.bin sending 'unlocktoken' (0 KB)... OKAY writing 'unlocktoken'... (bootloader) unlock token check successfully Execution time is 140(ms) OKAY Please continue the unlock process on your phone. Phone DISconnected |
desire HTC 510 Cid , Unlock , Imei Done !!!! |
Quote:
Hi nuri sir I want to know Xtc2clip make super cid and s off possible when phone not on perfect It possbile in fastboot mode??? Sent from my iPhone using Tapatalk |
Other Goal in M7_UL International version S-OFF+Supercid+"Repair" is SD mode with my very old but the Best Y (HD7 cable), just in 10 seconds....IMPORTANT never success with "Java Card" after "Repair mei"...Update accepted from HTC, download and installed...it's great...;) Sorry for no Photos but just returned to customer...Service Speed, Safe and PAYED...please not get down the Market ..remember to all that "Sunshine .Apk" ask 25$ only for get one easy S-OFF...and Not all HTC how the Best XTC2CLIP. :) BR allumts |
Success HTC one x at&t! Fast and easy! :D cable Y and microSD & pff!;) Great work #xtc2clip |
Quote:
BR allumts:) |
Quote:
I tested it with 2 HTC M8 which was installed TWRP and formatted system and can not boot to system at all. I S-offed and Super CID through direct mode then run Normal RUU L50 and worked perfectly. |
Guys please this isn't right thread for to talk about these issue...we are Off Topic in FULL. @zozo2 good for you report, but i had write above that XTC2CLIP work in Hboot/Fastboot so can be possible...but if this user want more clairment can open his own new thread... BR allumts |
hTC Desire 300 (G3U) S-off super CID Done with Direct Mode Reading information... Using Fastboot mode... Reading common information (bootloader) version: 0.5 (bootloader) version-bootloader: 1.16.0002 (bootloader) version-baseband: 14.10.36Q4.13 (bootloader) version-cpld: None (bootloader) version-microp: None (bootloader) version-main: (bootloader) version-misc: PVT SHIP S-OFF (bootloader) serialno: HT39XWL05617 (bootloader) imei: 358887xxxxxxxx (bootloader) meid: (bootloader) product: g3u (bootloader) platform: HBOOT-8225 (bootloader) modelid: 0P6A20000 (bootloader) cidnum: 11111111 (bootloader) battery-status: good (bootloader) battery-voltage: 4120mV (bootloader) partition-layout: HTC (bootloader) security: off (bootloader) build-mode: SHIP (bootloader) boot-mode: FASTBOOT (bootloader) commitno-bootloader: dirty-2ee15b5d5a (bootloader) hbootpreupdate: 12 (bootloader) gencheckpt: 0 Execution time is 15(ms) all: Done! |
Quote:
|
Quote:
http://forum.gsmhosting.com/vbb/f961...eader-1964692/ BR allumts |
today i am success with 820 dual :) ,but loss my 1 cabol :(:( |
30/08/2015 09:49:54 م Phone connected [FA51DWM01765] 30/08/2015 09:49:55 م Sending oem writesecureflag 0 30/08/2015 09:49:55 م ... (bootloader) SecuritySDInit: counter = 2 (bootloader) m8_init_sd, SD card already power on (bootloader) [SPEW] GPIO 0 status is 0 (bootloader) sdhci_open: id=0 (bootloader) Initializing MMC host data structure and clock! (bootloader) mmc slot#2 clock enabled (bootloader) sdhci_set_clock: slot 2, freq 192000000 (bootloader) GPLL0 is enabled (bootloader) clock_update_cfg_sd is done (bootloader) sd clock set done (bootloader) sdhci_set_bus_width: bus width 0 (bootloader) sdhci_clk_supply: freq 400000 30/08/2015 09:49:56 م (bootloader) Error: Command never completed (bootloader) Error: Command timeout error (bootloader) Error: Command completed with errors (bootloader) The response for CMD8 does not match the supplied value (bootloader) Decoded CID fields: (bootloader) Manufacturer ID: 7f (bootloader) OEM ID: 0x0 (bootloader) Product Name: 5270 (bootloader) Product revision: 5.2 (bootloader) Product serial number: B4E (bootloader) Manufacturing date: 2 2015 (bootloader) sdhci_clk_supply: freq 50000000 (bootloader) sdhci_set_bus_width: bus width 1 (bootloader) Done initialization of the card (bootloader) erase_grpsize: -16777216 (bootloader) erase_grpmult: 261078256 (bootloader) wp_grpsize: 1 (bootloader) wp_grpen: 1 (bootloader) perm_wp: 0 (bootloader) temp_wp: 0 (bootloader) [Tuxera][Error] No exFAT partition found 30/08/2015 09:49:59 م (bootloader) writesecureflag: KeyCard remain count 10000 (bootloader) PID:272 (bootloader) Start Verify: 3 30/08/2015 09:50:00 م (bootloader) [PGFS] partition_update_pgfs: pg1fs_security (bootloader) TZ_HTC_SVC_ENC ret = 0 (bootloader) [PGFS] partition_update_pgfs: pg2fs_sec_recovery Execution time is 4309(ms) OKAY 30/08/2015 09:50:00 م Operation finished 30/08/2015 09:50:08 م Sending reboot-bootloader 30/08/2015 09:50:08 م Execution time is 13(ms) rebooting into bootloader... OKAY 30/08/2015 09:50:08 م Operation finished 30/08/2015 09:50:09 م Phone DISconnected 30/08/2015 09:50:13 م Phone connected [FA51DWM01765] 30/08/2015 09:50:18 م Sending oem writecid 11111111 30/08/2015 09:50:18 م ... (bootloader) Start Verify: 0 (bootloader) Input CID is super CID (bootloader) Start Verify: 0 Execution time is 32(ms) OKAY 30/08/2015 09:50:18 م Operation finished |
HTC One M8_UL----->>>S-Off---Super CID Done Device Info Before Operation: Reading information... Using Fastboot mode... Reading common information (bootloader) version: 0.5 (bootloader) version-bootloader: 3.18.0.0000 (bootloader) version-baseband: 1.19.21331147A1.09G (bootloader) version-cpld: None (bootloader) version-microp: None (bootloader) version-main: 2.22.401.5 (bootloader) version-misc: PVT SHIP S-ON (bootloader) serialno: HT49JWM01872 (bootloader) imei: 3578710xxxxxxxx (bootloader) imei2: Not Support (bootloader) meid: 00000000000000 (bootloader) product: m8_ul (bootloader) platform: hTCBmsm8974 (bootloader) modelid: 0P6B10000 (bootloader) cidnum: HTC__102 (bootloader) battery-status: good (bootloader) battery-voltage: 0mV (bootloader) partition-layout: Generic (bootloader) security: on (bootloader) build-mode: SHIP (bootloader) boot-mode: FASTBOOT (bootloader) commitno-bootloader: 5e4b24e4 (bootloader) hbootpreupdate: 11 (bootloader) gencheckpt: 0 Execution time is 15(ms) all: Done! Reading secure flag information (bootloader) secure_flag: 3 Execution time is 0(ms) OKAY Operation Done : [IMG]http://i62.tinypic.com/2lcy5vs.jpg[/IMG] Device Info After Operation: Reading information... Using Fastboot mode... Reading common information (bootloader) version: 0.5 (bootloader) version-bootloader: 3.18.0.0000 (bootloader) version-baseband: 1.19.21331147A1.09G (bootloader) version-cpld: None (bootloader) version-microp: None (bootloader) version-main: 2.22.401.5 (bootloader) version-misc: PVT SHIP S-OFF (bootloader) serialno: HT49JWM01872 (bootloader) imei: 3578710xxxxxxxx (bootloader) imei2: Not Support (bootloader) meid: 00000000000000 (bootloader) product: m8_ul (bootloader) platform: hTCBmsm8974 (bootloader) modelid: 0P6B10000 (bootloader) cidnum: 11111111 (bootloader) battery-status: good (bootloader) battery-voltage: 0mV (bootloader) partition-layout: Generic (bootloader) security: off (bootloader) build-mode: SHIP (bootloader) boot-mode: FASTBOOT (bootloader) commitno-bootloader: 5e4b24e4 (bootloader) hbootpreupdate: 11 (bootloader) gencheckpt: 0 Execution time is 20(ms) all: Done! Reading secure flag information (bootloader) secure_flag: 0 Execution time is 14(ms) OKAY Reading CID information (bootloader) cid: 11111111 Execution time is 13(ms) OKAY |
HTC one x successfully s off cid change by xtc2 clip http://s13.postimg.org/ibnk6gufb/IMG_0461.jpg [IMG]http://s5.postimg.org/b0cr47***/image.png[/IMG] http://s5.postimg.org/mdzaff3zr/image.png http://s5.postimg.org/cupllyghj/IMG_0462.jpg XTC2 CLIP IS BEST TEAM |
Htc Desire X unlock with direct mode Code: Sending oem clearsimlocktype |
Same: Desire X Direct mode commands Clear simlock success:-) Sending oem clearsimlocktype ... (bootloader) readsecureflag: secure flag: ON (bootloader) AMSS is ready (bootloader) clearsimlocktype: keycard remain count 10000 (bootloader) clearsimlocktype: SimLockType: 1 (bootloader) buf_addr:2FC300,buf_size:6000,start_sector:1779C (bootloader) HWIO_SDC1_MD_REG_ADDR=0xA86000A0 (bootloader) HWIO_SDC1_NS_REG_ADDR=0xA86000A4 (bootloader) HWIO_SDC3_MD_REG_ADDR=0xA86000B0 (bootloader) HWIO_SDC3_NS_REG_ADDR=0xA86000B4 (bootloader) phys_to_virt(HWIO_SDC1_MD_REG_ADDR)=0xD32000A0 (bootloader) phys_to_virt(HWIO_SDC1_NS_REG_ADDR)=0xD32000A4 (bootloader) phys_to_virt(HWIO_SDC3_MD_REG_ADDR)=0xD32000B0 (bootloader) phys_to_virt(HWIO_SDC3_NS_REG_ADDR)=0xD32000B4 (bootloader) HWIO_SDC1_MD_REG_ADDR=0xA86000A0 (bootloader) HWIO_SDC1_NS_REG_ADDR=0xA86000A4 (bootloader) HWIO_SDC3_MD_REG_ADDR=0xA86000B0 (bootloader) HWIO_SDC3_NS_REG_ADDR=0xA86000B4 (bootloader) phys_to_virt(HWIO_SDC1_MD_REG_ADDR)=0xD32000A0 (bootloader) phys_to_virt(HWIO_SDC1_NS_REG_ADDR)=0xD32000A4 (bootloader) phys_to_virt(HWIO_SDC3_MD_REG_ADDR)=0xD32000B0 (bootloader) phys_to_virt(HWIO_SDC3_NS_REG_ADDR)=0xD32000B4 (bootloader) [ERR] Cmd5 polling status timed out, MCI_STATUS: 0x400000 (bootloader) [ERR] sdcc_command: sdcc_poll_status error, rc: 2 (bootloader) [ERR] Cmd8 polling status timed out, MCI_STATUS: 0x400000 (bootloader) [ERR] sdcc_command: sdcc_poll_status error, rc: 2 (bootloader) [ERR] Cmd8 polling status timed out, MCI_STATUS: 0x400000 (bootloader) [ERR] sdcc_command: sdcc_poll_status error, rc: 2 (bootloader) [ERR] Cmd8 polling status timed out, MCI_STATUS: 0x400000 (bootloader) [ERR] sdcc_command: sdcc_poll_status error, rc: 2 (bootloader) [ERR] Cmd55 polling status timed out, MCI_STATUS: 0x400000 (bootloader) [ERR] sdcc_command: sdcc_poll_status error, rc: 2 (bootloader) sdcc_init_memory_device done (bootloader) HWIO_SDC1_MD_REG_ADDR=0xA86000A0 (bootloader) HWIO_SDC1_NS_REG_ADDR=0xA86000A4 (bootloader) HWIO_SDC3_MD_REG_ADDR=0xA86000B0 (bootloader) HWIO_SDC3_NS_REG_ADDR=0xA86000B4 (bootloader) phys_to_virt(HWIO_SDC1_MD_REG_ADDR)=0xD32000A0 (bootloader) phys_to_virt(HWIO_SDC1_NS_REG_ADDR)=0xD32000A4 (bootloader) phys_to_virt(HWIO_SDC3_MD_REG_ADDR)=0xD32000B0 (bootloader) phys_to_virt(HWIO_SDC3_NS_REG_ADDR)=0xD32000B4 (bootloader) Finish write sector address 1779C ... (bootloader) clearsimlocktype: UnlockSimLockbySmartCard success!!! Execution time is 23156(ms) OKAY Operation finished Reading CID information ... (bootloader) cid: HTC__032 Execution time is 15(ms) OKAY Read information completed. Phone DISconnected BR. |
i just want to say that there is no tool like xtc2clip in the world this tool is awesome |
it works very well in direct mode also great team my best wishes |
M8_WLS S-off Super CID SD Mode TNX XTC2clip |
HTC Explorer (Pico) S-OFF & SUPER CID DONE HTC Explorer (Pico) S-OFF & SUPER CID DONE With Direct Mode 1: Just Insert Clip Flex Inside SD Slot 2: Put Phone in Fastboot Mode 3: Open Exe Go To Direct Mode & Change What You Wanna Do :) see pics below for more details you can contact me @ skype : kbgsmlab http://i1119.photobucket.com/albums/...pskn6cykqp.jpg http://i1119.photobucket.com/albums/...psa1svtyr2.png http://i1119.photobucket.com/albums/...psv539xacl.jpg Br |
HTC DESIRE 500 STUCKED AT LOGO DONE BY S-OFF WRITING SUPER CID AND FLASHED WITH RUU http://i62.tinypic.com/2due983.jpg http://i57.tinypic.com/aylnxw.jpg http://i58.tinypic.com/28iu4aq.jpg |
1 Attachment(s) I unlocked My HTC_ONE_M7 from UK successfully,,,,But one set from Jappan not done...even i did S-OFF & Changed CID successfully but still no service where do i wrong ??? BR |
Quote:
Please don't use this thread to report problem or ask questions, it's not frequently monitored. As to your question - your phone is HTV21, which will be supported in next release. |
This issue of @sunshine4u, post #92 is same issue that have damaged one HTC one S, after S-OFF+Supercid phone Stuck in Logo....flashed other FW with success but always phone damaged...what happen??? Time ago i've thinked was only one my problem, but now seeing other HTC with same issue i'm a little worried....Phones was working 100% first of this S-OFF and Supercid...please ceck where's Bug becouse i've also changed Touch and ceck Hw side and is all ok. BR allumts |
Quote:
|
Ops sorry, my mystake reading speed...sorry but is that when i not get out of my shop only one phone NOT Repaired i'm angry...anyway all other are benn managed with success...only this cannot understand... BR allumts |
:DHtc desire 626s is done. :) |
Htc M8S unlock success |
HTC One Max Sprint Unlock Done solution HTC One Max SPRINT UNLOCK (only work with S-OFF) 1) go to the tab "SD mode editor" enable new sec (Security S-OFF). 2) click save to driver. 3) disable S-ON with cable Y and XTC2CLIP 4) once deactivated S-ON go to the tab "SPRINT" 5) Please connect phone in FASTBOOT (vol_down + pwr) 6) click GET SPC Code 7) when you have the SPC click OS 8) enable mode adb 9) go dial write ##3424#, select DM ON 10) click refresh, select port diag 11) click unlock 12) restart the phone Trying to connect in Sprint mode... Trying to connect on COM91 Checking server connection... Communicating with the XTC 2 Clip ... Connecting to the server... Please wait, generating unlock hash... Process finished SUCCESSFULLY Please restart your phone for the changes to take effect Phone DISconnected |
All times are GMT +1. The time now is 21:09. |
vBulletin Optimisation provided by
vB Optimise (Pro) -
vBulletin Mods & Addons Copyright © 2024 DragonByte Technologies Ltd.
- GSM Hosting Ltd. - 1999-2023 -