XTC 2 Tool 1.18 has been released | Added FAQ link, FRP and Japan models fix

[rezakeshavarza]

thanks for replay me
how to s-off wild fire s whit xtc2clip?????????? for touch calibration !!!

[hm.faizan]

dear team last night i we seen 1 bug in new update

m tryng to unlock m9 sprint 5.1.1 but atfer done phone stuck on Limited Service

then m tryng to unlock with this procedure but still same Limited Service problem

The Fix Is
1 - Call 911 and close this call in 10 second, your phone get signal for 5 seconds
2 - Relock your phone ##786# (Read your spc in xtc2clip)
3 - Select Reset and type your SPC
4 - Write secflag off and super cid
5 - Downgrade with this Firmware
6 - Copy files for m9 and m9 sprint in Special Unlock/Imei of the xtc2clip tool
7 - Power off your phone
8 - Put your xtc2clip flex in your one m9
9 - Power On your m9 in FTM Mode and wait for xtc2clip make your work
10 - When your phone reboot put your sim card and select gsm/utms
11 - Now you can update this phone by ota download

then m try to use old version 1.16 and successfully unlock m9 sprint

[xtc2clip]

Originally Posted by hm.faizan

dear team last night i we seen 1 bug in new update

m tryng to unlock m9 sprint 5.1.1 but atfer done phone stuck on Limited Service

then m tryng to unlock with this procedure but still same Limited Service problem




then m try to use old version 1.16 and successfully unlock m9 sprint

Hello!

Thanks for your report, but there is no difference in Sprint unlocking between 1.16 and 1.18.

[xtc2clip]

Originally Posted by yurais

did you solve the issues on m7_ul?

errors like: check keicard failed and sd init failed
first error on 1.44 hboot and second error on 1.55(fix_me) hboot

And card working ok on other phones, no filesystem corruption since problem is still there just after writing Image file to card.

This is not a clip issues.
This is Y cable and microSD reader issues, there is nothing we can "fix" about it.

[svetoslakis]

HTC ONE A9
Direct mode S-OFF...NOT_FIND_SMART_IO
Download mode

Reading information...
Using Fastboot mode...
Reading common information
(bootloader) kernel: lk
(bootloader) product: htc_hiaeuhl
(bootloader) version: 1.0
(bootloader) imei: 352xxxxxxxxxxxx
(bootloader) version-main: 1.10.401.7
(bootloader) boot-mode: download
(bootloader) version-baseband: [email protected]
(bootloader) version-bootloader: 1.0.0.0000
(bootloader) mid: 2PQ910000
(bootloader) cid: HTC__034
Execution time is 12(ms)
all:
Reading secure flag information
... (bootloader) Device security level S-ON
Execution time is 19(ms)
OKAY

Sending oem writesecureflag 0
Execution time is 23(ms)
... FAILPERMISSION DENY (NOT_FIND_SMART_IO)
FAILED (remote: PERMISSION DENY (NOT_FIND_SMART_IO))
Operation finished

file sf.txt-0

Possible errors:

NOT_FIND_SMART_IO - Your clip is not attached.

what is the problem please help

Offline mode no problem s-off

[allumts]

Read alone:

NOT_FIND_SMART_IO - Your clip is not attached.

Sd card slot of A9 is a little bad, if you Flat of Xtx2clip isn't Full enter and slot closed, (carefully with flat), cannot use in online mode the clip, all here.

First of get in Download mode you clip must be connected and later get in download mode, (Vol+ and Power).

Please next time use manual or read Sticky Thread in this section
guide-direct-mode-s-off-imei-etc-phones-download-mode-a9-m9-626-etc

BR
allumts

[yurais]

Originally Posted by xtc2clip

This is not a clip issues.
This is Y cable and microSD reader issues, there is nothing we can "fix" about it.

Same y cable and same sd reader I use for all htc phones servicing.

Only have problems with m7 and time ago with one s

I know it is not calls or reader.

Not a newbie here

Enviado desde mi One mediante Tapatalk

[xtc2clip]

All offtopic deleted, thread closed.