xtc2clip no work [solved] direct mode: Sending oem writesecureflag 0 ... (bootloader) [JAVACARD_ERR] SD/USBDISK Init error (bootloader) writesecureflag: Permission denied, value 1 Execution time is 281(ms) OKAY Operation finished offline mode: http://i58.tinypic.com/r8z1qr.jpg |
How to Remove Tampered Banner on HTC One M8 |
Quote:
|
Quote:
|
Quote:
Try also offline method http://forum.gsmhosting.com/vbb/f961...steps-1964502/ |
Sending oem readsecureflag ... (bootloader) read secure flag: 3 cause my phone was s-off before I put hook to box now it won't s-off or flash ruu or download mode will not change to s-off |
Quote:
2. The good idea is: a) power off phone b) connect clip to phone c) power on phone in bootloader mode d) goto fastboot mode using phone menu e) Use XTC2Tool in direct mode and use "Write security flag" and set it to 0. f) Post result here. |
Quote:
1. You cannot turn phone to S-ON just by "hooking the box" 2. Some commands and one some phones like writecid will turn S-ON, you simply need to do S-OFF after this. 3. Please post your model and the way you are trying to S-OFF, your logs only shows that you are reading the security flag. And next time please be so kind to create a separate thread for your problem to help us to support you better. |
Quote:
However, we will consider adding this feature to the nearest updates. The flag itself doesn't affect the way your phone works, and if you are intended to take it to your service center, you should know that they will detect modified firmware even without the tamper flag and may refuse to service it. So if you need to pass it to service center, it's always good to reflash with original firmware. |
Quote:
|
Quote:
|
Quote:
You may try to reset your clip using this procedure: http://forum.gsmhosting.com/vbb/f961...t-etc-1964648/ |
Quote:
direct mode: Sending oem writesecureflag 0 ... (bootloader) [JAVACARD_ERR] SD/USBDISK Init error (bootloader) writesecureflag: Permission denied, value 1 Execution time is 281(ms) OKAY Operation finished i know how to use because i have java card, same card reader java card work xtc2clip not, try to repair the filesystem and will post the results thanks |
Quote:
And what do you mean by "same reader java card work" - are you saying that your clip is not detected on computer? |
Quote:
... (bootloader) vreg_set: request is duplicated id 14 (bootloader) ruby_init_sd, SD card power on ok (bootloader) [SD_HW_ERR] SD: No device attached (bootloader) [JAVACARD_ERR] SD Init error (bootloader) writesecureflag: Permission denied, value 1 Execution time is 2250(ms) OKAY Operation finished Phone connected ! flex changed, filesystem repaired now what? |
Quote:
|
Quote:
|
Quote:
Can we get back to T6 One Max? I have never seen a clip that is detected on a PC but will not be detected in the phone. Can you insert any regular SD card to make sure the slot is working? Can you confirm you tried the clip on both phones just now and it doesn't work even after repair? If so, you may contact your dealer for replacement. You can keep the card and replace the clip only. |
Quote:
tried in 4 phones m7, m8, htc one max sprint and the las one htc amaze tmobile, i don't have any other htc now but i will try to get one and i will post results thanks!! |
Quote:
You do use the sd-slot right, not the Y-cable (except the M7 which has no sd-slot) |
Quote:
|
Quote:
|
Quote:
htc amaze sd card done with sd card slot and direct mode maybe problem is card reader but i tried many sd card reader different brands, where can buy tested sd card reader and Y-cable? thanks!! |
Quote:
It can't damage the cable if you will do everything carefully :) So you have tried all phones using Y-cable? Your Y-cable can be damaged/wrong as well. We have produced a stock of Y-cables and now shipping to our dealers. As to sd-readers, I'm now using Kingston like this: http://www.amazon.co.uk/Kingston-Gen.../dp/B0028R3NCU |
@Customers Be carefull when you buy these readers you must have to buy the original as i found in many cases peoples buy same look but its not original and peoples bought this and getting same issues because its not real and they use old IC and still got trouble :( Regards, GsmEasy |
Quote:
|
Quote:
|
Quote:
|
All times are GMT +1. The time now is 20:46. |
vBulletin Optimisation provided by
vB Optimise (Pro) -
vBulletin Mods & Addons Copyright © 2024 DragonByte Technologies Ltd.
- GSM Hosting Ltd. - 1999-2023 -