lenovo A6020a41 K5 frp ok
 

Action : Reset all to default
Tips:power off Phone, Remove & Reinsert Battery, hold vol+ & vol- keys, insert USB Cable
Waiting for Phone Usb...
Phone found [ USB Port:COM15 ]
Connecting...
Reading cpu info...ok
MSM ID: 0x0091B0E1
Serial: 0x0709EF76
Processor: MSM8929, Snapdragon415
Sending the boot...ok
Receive ACK, Boot runs normally.
Config parameters has been completed.
Reading Partitions info...ok
Reading storage info...ok
eMMC Size: 16GB, usable capacity: 14,56GB

Formatting ...
All Done

Action completed
Time taken : 00:00:07
Reconnect Battery/USB Cable
CS-Tool Ver 1.58.2

---------- Process started: 11/6/2018 9:12:39 AM ----------
DongleManager [CST] v1.5 [11/6/2018 9:12:39 AM]
PC HWID: 95C80985B8FA2D07E589EDDE694A734D
Card-Reader: Alcor Micro USB Smart Card Reader 0
HWID: 01066A6824881292
Connecting to server
Server connection successfully established
Checking DongleManager version...
Your DongleManager is up-to-date
Checking Dongle Identification...
Authenticating on server...
Authentication successfull
Service stage 1 confirmed
Securing session...
Session secured ok
Upgrading dongle...
DO NOT disconnect Dongle !
WAIT 3-4 minutes !
Applet upgrade ok
Process completed
---------- Process finished: 11/6/2018 9:12:57 AM ----------
DongleManager [CST] v1.5 [11/6/2018 9:13:00 AM]
PC HWID: 95C80985B8FA2D07E589EDDE694A734D
Card-Reader: Alcor Micro USB Smart Card Reader 0
HWID: 01066A6824881292
SN: 06836A68
SWID: 0000068307385DA3
Version: 0006
Error Code: 0
Dongle IS NOT Active