[15-02-24] UMTv2/UMTPro QcFire v9.3 - Samsung Unbrick, KG Bypass and more...

[U.M.T]

Originally Posted by Deni's

Added Samsung TAR to Unbrick Firmware Converter
- No need to extract/rename file one by one
- It will extract all required files in selected folder
- You can use this extracted in QcFire Flash Tab > Samsung Unbrick group to repair dead boot devices
- Always use same or higher BIT firmware for successfull unbrick operation


How to usethis feature? is there video how to useit?

Here is a simple vidoe to guide on how to make Unbrick Friwmare for Samsung Qualcomm Devices uses using QcFire.



Br,
UMT

[uzzal10]

waw good update its usefull for me

[:Aishur:]

QcFire Ver. 9.3

Device	: Samsung Galaxy A52 (SM-A525F) BIT6
Operation	: Samsung Reset FRP
Checking for existing devices...Not Found
Turn Off phone, hold Vol UP + Vol DOWN and insert USB cable.
Some phones may need Special Boot Cable or TestPoint for EDL mode.
SAMSUNG : Turn Off phone, hold EDL Cable Button and insert to phone and
press VOL DOWN + POWER on phone more than 3 times rapidly and then leave EDL Cable Button.
Found Port	: Qualcomm HS-USB QDLoader 9008 (COM28)
Driver Info	: Qualcomm Incorporated, qcusbser.sys, 2.1.2.7
Connecting to phone...OK
Waiting for response...Ignored
Init Handshake Sequence...Failed
Operation Finished.
QcFire Ver. 9.3

QcFire Ver. 9.2

Device	: Samsung Galaxy A52 (SM-A525F) BIT6
Operation	: Samsung Reset FRP
Checking for existing devices...Found
Port	: Qualcomm HS-USB QDLoader 9008 (COM28)
Driver Info	: Qualcomm Incorporated, qcusbser.sys, 2.1.2.7
Opening Port...OK
Turn Off phone, hold Vol UP + Vol DOWN and insert USB cable.
Some phones may need Special Boot Cable or TestPoint for EDL mode.
SAMSUNG : Turn Off phone, hold EDL Cable Button and insert to phone and
press VOL DOWN + POWER on phone more than 3 times rapidly and then leave EDL Cable Button.
Found Port	: Qualcomm HS-USB QDLoader 9008 (COM28)
Driver Info	: Qualcomm Incorporated, qcusbser.sys, 2.1.2.7
Connecting to phone...OK
Waiting for response...Ignored
Init Handshake Sequence...Failed
Handshake Sequence Error Ignored!
Initializing Protocol...OK
Using Pre-Defined Loader [SM-A525F BIT6.ufl]
Preparing Loader...Done
Sending Loader [SM-A525F BIT6]...Write Error!
Please use correct loader and check USB port / cable.
Operation Finished.
QcFire Ver. 9.2

[Gsm::Boiragi::]

Samsung SM-S908E supported for kg bypass and downdrag same bynari, unbrick?

[U.M.T]

Originally Posted by :Aishur:

QcFire Ver. 9.3

Device	: Samsung Galaxy A52 (SM-A525F) BIT6
Operation	: Samsung Reset FRP
Checking for existing devices...Not Found
Turn Off phone, hold Vol UP + Vol DOWN and insert USB cable.
Some phones may need Special Boot Cable or TestPoint for EDL mode.
SAMSUNG : Turn Off phone, hold EDL Cable Button and insert to phone and
press VOL DOWN + POWER on phone more than 3 times rapidly and then leave EDL Cable Button.
Found Port	: Qualcomm HS-USB QDLoader 9008 (COM28)
Driver Info	: Qualcomm Incorporated, qcusbser.sys, 2.1.2.7
Connecting to phone...OK
Waiting for response...Ignored
Init Handshake Sequence...Failed
Operation Finished.
QcFire Ver. 9.3

QcFire Ver. 9.2

Device	: Samsung Galaxy A52 (SM-A525F) BIT6
Operation	: Samsung Reset FRP
Checking for existing devices...Found
Port	: Qualcomm HS-USB QDLoader 9008 (COM28)
Driver Info	: Qualcomm Incorporated, qcusbser.sys, 2.1.2.7
Opening Port...OK
Turn Off phone, hold Vol UP + Vol DOWN and insert USB cable.
Some phones may need Special Boot Cable or TestPoint for EDL mode.
SAMSUNG : Turn Off phone, hold EDL Cable Button and insert to phone and
press VOL DOWN + POWER on phone more than 3 times rapidly and then leave EDL Cable Button.
Found Port	: Qualcomm HS-USB QDLoader 9008 (COM28)
Driver Info	: Qualcomm Incorporated, qcusbser.sys, 2.1.2.7
Connecting to phone...OK
Waiting for response...Ignored
Init Handshake Sequence...Failed
Handshake Sequence Error Ignored!
Initializing Protocol...OK
Using Pre-Defined Loader [SM-A525F BIT6.ufl]
Preparing Loader...Done
Sending Loader [SM-A525F BIT6]...Write Error!
Please use correct loader and check USB port / cable.
Operation Finished.
QcFire Ver. 9.2

Seems some communication issue.

Close any other application running which may interfere with port.

Br,
UMT

[Hafiz ArslanAli]

hello sir
where is samsung spacial group to flash kg locked device???

[zakaria78]

t875 is it supported ?

[simcityreal]

wondering updates........

[tyno]

Great update thanks best team

[i_seeque]

Originally Posted by Hafiz ArslanAli

hello sir
where is samsung spacial group to flash kg locked device???

here it is



ok

[y_info2004]

Device : Samsung Galaxy A52 (SM-A525F) BIT6
Operation : Samsung Reset FRP
Checking for existing devices...Not Found
Turn Off phone, hold Vol UP + Vol DOWN and insert USB cable.
Some phones may need Special Boot Cable or TestPoint for EDL mode.
SAMSUNG : Turn Off phone, hold EDL Cable Button and insert to phone and
press VOL DOWN + POWER on phone more than 3 times rapidly and then leave EDL Cable Button.
Found Port : Qualcomm HS-USB QDLoader 9008 (COM105)
Driver Info : Qualcomm Incorporated, qcusbser.sys, 2.1.2.2
Connecting to phone...OK
Waiting for response...OK
Init Handshake Sequence...OK
Hardware ID : E1901400 [SM6250] 00002000
OPK_DATA : 36E60270BD33E72EA2DE1D42607BFE83C90B16C4236EC83747 F7AE14535FB63E
Initializing Protocol...OK
Using Pre-Defined Loader [SM-A525F BIT6.ufl]
Preparing Loader...Done
Sending Loader [SM-A525F BIT6]...Done
Executing Loader...OK
Detecting Storage Type...OK
Hardware : SM6250, UFS, 128 GB
LU Count : 6 [0x01DA3400] [0x00000800] [0x00000800] [0x00000400] [0x00025800] [0x00000800]
WARNING! High Speed Driver is not installed.
Please install driver from QcFire\Drivers folder using Device Manager.
Payload Info : In: 262144 [65536], Out: 16384, Sector Size: 4096
Reading Partition Table...OK
Reading Device Information...OK
Software : TP1A.220624.014.A525FXXS6DWK2, A525FXXS6DWK2 [Wed Nov 29 15:59:32 KST 2023]
Android Ver. : 13
Patch Level : 2023-12-01
Reset FRP... Done
Operation Finished.
QcFire Ver. 9.3

[Fast Fix]

Model : Oppo F17 (CPH2095)
Operation : Erase Userdata
Found Port : Qualcomm HS-USB QDLoader 9008 (COM25)
Connecting to phone...OK
Waiting for response...OK
Init Handshake Sequence...OK
Hardware ID : E1D01400 [SDM662] 00005100
OPK_DATA : 19CF99D55CA3B2E11EA19E52E3541DEDF01898FD9F8C40E625 48F1C7F60ABD47
Initializing Protocol...OK
Preparing Loader...Done
Sending Loader [CPH2095]...Done
Executing Loader...OK
Initializing Storage...OK
Read : Allowed
Write : Protected
Alt. Write : Allowed
Alt. Write is allowed, using Factory Format Method...Done
Erasing FRP Data...Done
Operation Finished.
QcFire Ver. 9.3

[Fast Fix]

Device : Vivo V11 Pro
Operation : Vivo Format FS / FRP Reset
Initializing Protocol...OK
Using Auto Loader Selection [1]
Preparing Loader...Done
Sending Loader [8937_029]...Done
Executing Loader...OK
SMEM Check Pass!
Detecting Storage Type...OK
Hardware : 8937, EMMC, 32 GB
Reading Partition Table...OK
Reading Device Information...OK
Android Ver. : 11
Patch Level : 2022-03-01
Formatting userdata...DonePatched OK
Resetting FRP Lock...Done
Wipe cache / userdata from Recovery and reboot.
First startup may take 2-5 minutes.
Operation Finished.
QcFire Ver. 9.3

[URGENT_2008]

Originally Posted by U.M.T

Here is a simple vidoe to guide on how to make Unbrick Friwmare for Samsung Qualcomm Devices uses using QcFire.



Br,
UMT

------------------------------------------------------------------------------
HI,
I canot find a decision how to reset FRP on Samsung Galaxy s22 sm-s901b? Can you help me,please ?

[dondav7]

Umt is the best team always working very hard to impress it's users thanks for lg q92 it's actually world first