GSM Shop GSM Shop
GSM-Forum  

Welcome to the GSM-Forum forums.

You are currently viewing our boards as a guest which gives you limited access to view most discussions and access our other features.
Only registered members may post questions, contact other members or search our database of over 8 million posts.

Registration is fast, simple and absolutely free so please - Click to REGISTER!

If you have any problems with the registration process or your account login, please contact contact us .

Go Back   GSM-Forum > Product Support Sections > Hard/Software Products (official support) > Ultimate Multi Tool Box

Ultimate Multi Tool Box Multi GSM & CDMA Box

Reply
 
LinkBack Thread Tools Display Modes
Old 05-11-2021, 11:32   #76 (permalink)
No Life Poster
 
Join Date: Aug 2005
Posts: 2,082
Member: 172261
Status: Offline
Thanks Meter: 250

Operation : MTK One Click
Hold VOL UP + DOWN and connect USB Cable.
Some phone may have different key combination for BROM mode.
Waiting for device in BROM mode...
Port: COM322
Port Name: MediaTek USB Port_V1633 (COM322)
Path: \\?\usb#vid_0e8d&pid_0003#5&155d656&0&1#{86e0d1e0-8089-11d0-9ce4-08003e301f73}
Chipset: 0x0766, [MT6765]
Hardware Info: 0x8A00, 0xCA00, 0x00
SecureBoot: True
SLA: False
DA Auth: True
Disabling WatchDog...
- Success
Sending Payload data...
- Payload sent
Initiating Control Transfer...
- Done
Waiting for result...
- Result: 0xA1A2A3A4
Disable Auth Success
Waiting for Phone in Flash Mode...
Connect Power Off phone within 30 secs...
Port : MediaTek USB Port_V1633 (COM322)
(..\..\flashtool\Utility\LogFilesClean.cpp
(..\..\flashtool\Utility\LogFilesClean.cpp,38
(..\..\flashtool\Utility\LogFilesClean.cpp,38)
Connected to BROM.
Sending Download Agent...
connect DA end stage: 2, enable DRAM in 1st DA: 0
Connected to Download Agent..
Syncing with Target...
Reading Partition Table...
Storage : eMMC
Reading Device Information...
Brand : vivo
Manufacturer : vivo
Model : vivo 1808
Prod. Name : PD1732F_EX
Device : PD1732F_EX
Build Date : Sat Feb 27 20:52:58 CST 2021
Build Flavor : full_k62v1_64_bsp-user
Build Desc. : full_k62v1_64_bsp-user 8.1.0 O11019 1614430384 release-keys
Android Ver. : 8.1.0
Display ID : O11019 release-keys
Patch Level : 2021-02-01
Board : k62v1_64_bsp
Platform : mt6765
Board : k62v1_64_bsp
Platform : mt6765
Userdata is ENCRYPTED
Seeking Userdata...
Formatting Userdata...
- Success!
Seeking FRP Data...
Resetting FRP...
- Success!
Disconnect Battery/Cable and Power On Phone.
[UltimateMTK Ver. 4.2]
  Reply With Quote
The Following User Says Thank You to andre128 For This Useful Post:
Old 05-12-2021, 13:17   #77 (permalink)
No Life Poster
 
Join Date: Apr 2006
Location: IN INDIA
Posts: 1,622
Member: 263005
Status: Offline
Thanks Meter: 145
Arrow pc shutdown problem

when i reseting mi mtk phones pc is studown like this error. tried to reinstall soft and driver but still same
Attached Images
File Type: jpeg WhatsApp Image 2021-05-12 at 5.42.20 PM.jpeg (40.9 KB, 9 views)
  Reply With Quote
The Following User Says Thank You to alimuamin For This Useful Post:
Old 05-12-2021, 20:00   #78 (permalink)
Product Manager
 
U.M.T's Avatar
 
Join Date: Sep 2015
Location: Inside UMT
Posts: 8,021
Member: 2465108
Status: Offline
Sonork: No More Used
Thanks Meter: 10,962
Quote:
Originally Posted by alimuamin View Post
when i reseting mi mtk phones pc is studown like this error. tried to reinstall soft and driver but still same
This should be an issue with your drivers.

Br,
UMT
  Reply With Quote
The Following User Says Thank You to U.M.T For This Useful Post:
Old 05-13-2021, 05:35   #79 (permalink)
No Life Poster
 
Join Date: Aug 2005
Posts: 2,082
Member: 172261
Status: Offline
Thanks Meter: 250
wiko view 4 lite failed

Operation : MTK One Click
Hold VOL UP + DOWN and connect USB Cable.
Some phone may have different key combination for BROM mode.
Waiting for device in BROM mode...
Port: COM322
Port Name: MediaTek USB Port_V1633 (COM322)
Path: \\?\usb#vid_0e8d&pid_0003#5&155d656&0&1#{86e0d1e0-8089-11d0-9ce4-08003e301f73}
Chipset: 0x0766, [MT6765]
Hardware Info: 0x8A00, 0xCA00, 0x00
SecureBoot: True
SLA: False
DA Auth: False
Disabling WatchDog...
- Success
Sending Payload data...
- Payload sent
Initiating Control Transfer...
- Done
Waiting for result...
- Result: 0xA1A2A3A4
Disable Auth Success
Waiting for Phone in Flash Mode...
Connect Power Off phone within 30 secs...
Port : MediaTek USB Port_V1633 (COM322)
Connected to BROM.
Sending Download Agent...
connect DA end stage: 2, enable DRAM in 1st DA: 0
Connected to Download Agent..
Syncing with Target...
Reading Partition Table...
Storage : eMMC
Reading Device Information...
Userdata is ENCRYPTED
Seeking Userdata...
Formatting Userdata...
- Failed!
Erasing Userdata...
- Failed!
Seeking FRP Data...
Resetting FRP...
- Failed!
Disconnect Battery/Cable and Power On Phone.
[UltimateMTK Ver. 4.2]
  Reply With Quote
The Following User Says Thank You to andre128 For This Useful Post:
Old 05-13-2021, 06:22   #80 (permalink)
Insane Poster
 
Join Date: Mar 2018
Location: JHARKHAND
Posts: 82
Member: 2818707
Status: Offline
Thanks Meter: 24
Donate money to this user
This is really one of the greatest update umt team .
Thanks a lot >>>>>>>>>>>>>>>>>>>>
  Reply With Quote
Old 05-13-2021, 06:23   #81 (permalink)
Insane Poster
 
Join Date: Mar 2018
Location: JHARKHAND
Posts: 82
Member: 2818707
Status: Offline
Thanks Meter: 24
Donate money to this user
Bro its ur pc issue < just reinstal window after fromat "c" drive
  Reply With Quote
Old 05-13-2021, 10:29   #82 (permalink)
Product Manager
 
U.M.T's Avatar
 
Join Date: Sep 2015
Location: Inside UMT
Posts: 8,021
Member: 2465108
Status: Offline
Sonork: No More Used
Thanks Meter: 10,962
Quote:
Originally Posted by andre128 View Post
wiko view 4 lite failed

Operation : MTK One Click
Hold VOL UP + DOWN and connect USB Cable.
Some phone may have different key combination for BROM mode.
Waiting for device in BROM mode...
Port: COM322
Port Name: MediaTek USB Port_V1633 (COM322)
Path: \\?\usb#vid_0e8d&pid_0003#5&155d656&0&1#{86e0d1e0-8089-11d0-9ce4-08003e301f73}
Chipset: 0x0766, [MT6765]
Hardware Info: 0x8A00, 0xCA00, 0x00
SecureBoot: True
SLA: False
DA Auth: False
Disabling WatchDog...
- Success
Sending Payload data...
- Payload sent
Initiating Control Transfer...
- Done
Waiting for result...
- Result: 0xA1A2A3A4
Disable Auth Success
Waiting for Phone in Flash Mode...
Connect Power Off phone within 30 secs...
Port : MediaTek USB Port_V1633 (COM322)
Connected to BROM.
Sending Download Agent...
connect DA end stage: 2, enable DRAM in 1st DA: 0
Connected to Download Agent..
Syncing with Target...
Reading Partition Table...
Storage : eMMC
Reading Device Information...
Userdata is ENCRYPTED
Seeking Userdata...
Formatting Userdata...
- Failed!
Erasing Userdata...
- Failed!
Seeking FRP Data...
Resetting FRP...
- Failed!
Disconnect Battery/Cable and Power On Phone.
[UltimateMTK Ver. 4.2]
Did you try again? Or check phone manually bcoz sometimes wrong status is shown.

Br,
UMT
  Reply With Quote
Old 05-13-2021, 10:29   #83 (permalink)
Product Manager
 
U.M.T's Avatar
 
Join Date: Sep 2015
Location: Inside UMT
Posts: 8,021
Member: 2465108
Status: Offline
Sonork: No More Used
Thanks Meter: 10,962
Quote:
Originally Posted by andre128 View Post
wiko view 4 lite failed

Operation : MTK One Click
Hold VOL UP + DOWN and connect USB Cable.
Some phone may have different key combination for BROM mode.
Waiting for device in BROM mode...
Port: COM322
Port Name: MediaTek USB Port_V1633 (COM322)
Path: \\?\usb#vid_0e8d&pid_0003#5&155d656&0&1#{86e0d1e0-8089-11d0-9ce4-08003e301f73}
Chipset: 0x0766, [MT6765]
Hardware Info: 0x8A00, 0xCA00, 0x00
SecureBoot: True
SLA: False
DA Auth: False
Disabling WatchDog...
- Success
Sending Payload data...
- Payload sent
Initiating Control Transfer...
- Done
Waiting for result...
- Result: 0xA1A2A3A4
Disable Auth Success
Waiting for Phone in Flash Mode...
Connect Power Off phone within 30 secs...
Port : MediaTek USB Port_V1633 (COM322)
Connected to BROM.
Sending Download Agent...
connect DA end stage: 2, enable DRAM in 1st DA: 0
Connected to Download Agent..
Syncing with Target...
Reading Partition Table...
Storage : eMMC
Reading Device Information...
Userdata is ENCRYPTED
Seeking Userdata...
Formatting Userdata...
- Failed!
Erasing Userdata...
- Failed!
Seeking FRP Data...
Resetting FRP...
- Failed!
Disconnect Battery/Cable and Power On Phone.
[UltimateMTK Ver. 4.2]
Did you try again? Or check phone manually bcoz sometimes wrong status is shown.

Br,
UMT
  Reply With Quote
Old 05-13-2021, 14:32   #84 (permalink)
Freak Poster
 
Join Date: Nov 2016
Posts: 124
Member: 2650288
Status: Offline
Sonork: live:hackb151
Thanks Meter: 110
vivo v11i done one clik

Operation : MTK One Click
Hold VOL UP + DOWN and connect USB Cable.
Some phone may have different key combination for BROM mode.
Waiting for device in BROM mode...
Port: COM21
Port Name: MediaTek USB Port_V1632 (COM21)
Path: \\?\usb#vid_0e8d&pid_0003#7&1d2facea&0&1#{86e0d1e0-8089-11d0-9ce4-08003e301f73}
Chipset: 0x0788, [MT6771]
Hardware Info: 0x8A00, 0xCA00, 0x00
SecureBoot: True
SLA: False
DA Auth: True
Disabling WatchDog...
- Success
Sending Payload data...
- Payload sent
Initiating Control Transfer...
- Done
Waiting for result...
- Result: 0xA1A2A3A4
Disable Auth Success
Waiting for Phone in Flash Mode...
Connect Power Off phone within 30 secs...
Port : MediaTek USB Port_V1632 (COM21)
Connected to BROM.
Sending Download Agent...
connect DA end stage: 2, enable DRAM in 1st DA: 0
Connected to Download Agent..
Syncing with Target...
Reading Partition Table...
Storage : eMMC
Reading Device Information...
Build Date : Thu Apr 15 12:29:55 CST 2021
Build Flavor : full_k71v1_64_bsp-user
Build Desc. : full_k71v1_64_bsp-user 10 QP1A.190711.020 compiler04151201 release-keys
Android Ver. : 10
Display ID : QP1A.190711.020 release-keys
Patch Level : 2021-04-01
Platform : MT6771
Board : k71v1_64_bsp
Platform : mt6771
Platform : MT6771
Board : k71v1_64_bsp
Platform : mt6771
Userdata is ENCRYPTED
Seeking Userdata...
Formatting Userdata...
- Success!
Seeking FRP Data...
Resetting FRP...
- Success!
Disconnect Battery/Cable and Power On Phone.
[UltimateMTK Ver. 4.2]
  Reply With Quote
The Following User Says Thank You to neyaz007 For This Useful Post:
Old 05-15-2021, 09:06   #85 (permalink)
Junior Member
 
Join Date: Mar 2016
Posts: 7
Member: 2553183
Status: Offline
Thanks Meter: 0
Please improve coulcomm bass new cpu phone oppo/realme...And fast boot to edl
  Reply With Quote
Old 05-19-2021, 10:30   #86 (permalink)
No Life Poster
 
Join Date: Aug 2005
Posts: 2,082
Member: 172261
Status: Offline
Thanks Meter: 250
Y85 one click done

Code:
Operation : MTK One Click
Hold VOL UP + DOWN and connect USB Cable.
Some phone may have different key combination for BROM mode.
Waiting for device in BROM mode...
Port: COM322
Port Name: MediaTek USB Port_V1633 (COM322)
Path: \\?\usb#vid_0e8d&pid_0003#5&155d656&0&1#{86e0d1e0-8089-11d0-9ce4-08003e301f73}
Chipset: 0x0766, [MT6765]
Hardware Info: 0x8A00, 0xCA00, 0x00
SecureBoot: True
SLA: False
DA Auth: True
Disabling WatchDog...
- Success
Sending Payload data...
- Payload sent
Initiating Control Transfer...
- Done
Waiting for result...
- Result: 0xA1A2A3A4
Disable Auth Success
Waiting for Phone in Flash Mode...
Connect Power Off phone within 30 secs...
Port : MediaTek USB Port_V1633 (COM322)
Connected to BROM.
Sending Download Agent...
connect DA end stage: 2, enable DRAM in 1st DA: 0
Connected to Download Agent..
Syncing with Target...
Reading Partition Table...
Storage : eMMC
Reading Device Information...
Brand : vivo
Manufacturer : vivo
Model : vivo 1726
Prod. Name : PD1803F_EX
Device : PD1803F_EX
Build Date : Wed Apr 14 16:04:49 CST 2021
Build Flavor : full_k62v1_64_bsp-user
Build Desc. : full_k62v1_64_bsp-user 8.1.0 O11019 1618387501 release-keys
Android Ver. : 8.1.0
Display ID : O11019 release-keys
Patch Level : 2021-03-01
Board : k62v1_64_bsp
Platform : mt6765
Board : k62v1_64_bsp
Platform : mt6765
Userdata is ENCRYPTED
Seeking Userdata...
Formatting Userdata...
- Success!
Disconnect Battery/Cable and Power On Phone.
[UltimateMTK Ver. 4.2]
Quote:
Operation : MTK One Click
Hold VOL UP + DOWN and connect USB Cable.
Some phone may have different key combination for BROM mode.
Waiting for device in BROM mode...
Port: COM322
Port Name: MediaTek USB Port_V1633 (COM322)
Path: \\?\usb#vid_0e8d&pid_0003#5&155d656&0&1#{86e0d1e0-8089-11d0-9ce4-08003e301f73}
Chipset: 0x0766, [MT6765]
Hardware Info: 0x8A00, 0xCA00, 0x00
SecureBoot: True
SLA: False
DA Auth: True
Disabling WatchDog...
- Success
Sending Payload data...
- Payload sent
Initiating Control Transfer...
- Done
Waiting for result...
- Result: 0xA1A2A3A4
Disable Auth Success
Waiting for Phone in Flash Mode...
Connect Power Off phone within 30 secs...
Port : MediaTek USB Port_V1633 (COM322)
Connected to BROM.
Sending Download Agent...
connect DA end stage: 2, enable DRAM in 1st DA: 0
Connected to Download Agent..
Syncing with Target...
Reading Partition Table...
Storage : eMMC
Reading Device Information...
Brand : vivo
Manufacturer : vivo
Model : vivo 1726
Prod. Name : PD1803F_EX
Device : PD1803F_EX
Build Date : Wed Apr 14 16:04:49 CST 2021
Build Flavor : full_k62v1_64_bsp-user
Build Desc. : full_k62v1_64_bsp-user 8.1.0 O11019 1618387501 release-keys
Android Ver. : 8.1.0
Display ID : O11019 release-keys
Patch Level : 2021-03-01
Board : k62v1_64_bsp
Platform : mt6765
Board : k62v1_64_bsp
Platform : mt6765
Userdata is ENCRYPTED
Seeking FRP Data...
Resetting FRP...
- Success!
Disconnect Battery/Cable and Power On Phone.
[UltimateMTK Ver. 4.2]

Last edited by U.M.T; 05-19-2021 at 16:56.
  Reply With Quote
The Following User Says Thank You to andre128 For This Useful Post:
Old 05-19-2021, 19:48   #87 (permalink)
Freak Poster
 
Join Date: Apr 2015
Posts: 142
Member: 2384687
Status: Offline
Thanks Meter: 13
mtk one click . tested on vivo 1820 it works good
thank you
  Reply With Quote
Old 05-20-2021, 12:38   #88 (permalink)
Junior Member
 
Join Date: Oct 2018
Posts: 16
Member: 2874244
Status: Offline
Thanks Meter: 2
I have a problem about xiaomi redmi 9 imei repair. I make format nvram, factory reset, xiaomi methot and meta(new), but not successful. UMT show successful, but phone imei not changed. Please help.
  Reply With Quote
Old 05-20-2021, 13:45   #89 (permalink)
No Life Poster
 
Join Date: Jan 2006
Location: Santiago de Cuba
Posts: 3,501
Member: 220595
Status: Offline
Thanks Meter: 315
Quote:
Originally Posted by cepfns View Post
I have a problem about xiaomi redmi 9 imei repair. I make format nvram, factory reset, xiaomi methot and meta(new), but not successful. UMT show successful, but phone imei not changed. Please help.
I have the same issue with this model, nothing get really written or changed.
  Reply With Quote
Old 05-20-2021, 14:34   #90 (permalink)
Product Manager
 
U.M.T's Avatar
 
Join Date: Sep 2015
Location: Inside UMT
Posts: 8,021
Member: 2465108
Status: Offline
Sonork: No More Used
Thanks Meter: 10,962
This due to firmware, you need to downgrade it.

Vr,
UMT
  Reply With Quote
Reply

Bookmarks

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


 



All times are GMT +1. The time now is 01:22.



Powered by Searchlight © 2021 Axivo Inc.
vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2021 DragonByte Technologies Ltd.
- GSM Hosting Ltd. - 1999-2017 -
Page generated in 0.22128 seconds with 8 queries

SEO by vBSEO